You're probably missing the app-fw layer, which should run the compositor as a user-service. Enabling the 'agl-app-fw' layer should add them. Or alternatively, it is just sufficient to add 'agl-compositor-init', but I'm not sure if it would be enough, just give it a try and see. On 2/7/22 6:37 PM, Joel Winarske wrote: > Hello, > > I'm trying to build the image `agl-image-flutter-debug` for m3ulcb as part > of `meta-agl-flutter` in `meta-agl-devel` master. I'm missing something... > > `agl-image-flutter-debug` includes: > > IMAGE_INSTALL:append = "\ > agl-compositor \ > packagegroup-agl-profile-graphical \ > " > > The x86_64 qemu build runs as expected when building the same image. > > Post boot, service status: > > # systemctl status weston > * weston.service - Weston, a Wayland compositor, as a system service > Loaded: loaded (/lib/systemd/system/weston.service; enabled; vendor > preset: enabled) > Drop-In: /lib/systemd/system/weston.service.d > `-agl-compositor.conf > Active: failed (Result: exit-code) since Mon 2020-06-29 03:06:44 UTC; > 1 years 7 months ago > TriggeredBy: * weston.socket > Docs: man:weston(1) > man:weston.ini(5) > http://wayland.freedesktop.org/ > Process: 411 ExecStart=/usr/bin/agl-compositor --config > /etc/xdg/weston/weston.ini --idle-time=0 --debug (code=exited, > status=1/FAILURE) > Main PID: 411 (code=exited, status=1/FAILURE) > > Jun 29 03:06:43 m3ulcb systemd[1]: Starting Weston, a Wayland compositor, > as a system service... > Jun 29 03:06:43 m3ulcb systemd[411]: pam_unix(weston-autologin:session): > session opened for user weston by (uid=0) > Jun 29 03:06:44 m3ulcb systemd[1]: weston.service: Main process exited, > code=exited, status=1/FAILURE > Jun 29 03:06:44 m3ulcb systemd[1]: weston.service: Failed with result > 'exit-code'. > Jun 29 03:06:44 m3ulcb systemd[1]: Failed to start Weston, a Wayland > compositor, as a system service. > root@m3ulcb:~# > > > I do see "Failed to apply ACLs: Operation not supported" in the > systemd-logind service status, perhaps benign: > Jun 29 03:06:42 m3ulcb systemd-logind[393]: Watching system buttons on > /dev/input/event1 (Chicony HP Business Slim Keyboard) > Jun 29 03:06:42 m3ulcb systemd-logind[393]: Watching system buttons on > /dev/input/event2 (Chicony HP Business Slim Keyboard Consumer Control) > Jun 29 03:06:42 m3ulcb systemd-logind[393]: Watching system buttons on > /dev/input/event3 (Chicony HP Business Slim Keyboard System Control) > Jun 29 03:06:42 m3ulcb systemd-logind[393]: New seat seat1. > Jun 29 03:06:42 m3ulcb systemd[1]: Started Login Service. > Jun 29 03:06:43 m3ulcb systemd-logind[393]: New session c1 of user weston. > Jun 29 03:06:43 m3ulcb systemd-logind[393]: Failed to apply ACLs: Operation > not supported > Jun 29 03:06:44 m3ulcb systemd-logind[393]: Removed session c1. > Jun 29 03:06:44 m3ulcb systemd-logind[393]: Failed to apply ACLs: Operation > not supported > Feb 07 15:49:14 m3ulcb systemd-logind[393]: New session c2 of user root. > > > Boot logs: > NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.3.0.2 > NOTICE: BL2: PRR is R-Car M3 Ver.1.0 > NOTICE: BL2: Board is Starter Kit Rev.1.0 > NOTICE: BL2: Boot device is HyperFlash(80MHz) > NOTICE: BL2: LCM state is CM > NOTICE: AVS setting succeeded. DVFS_SetVID=0x53 > NOTICE: BL2: DDR3200(rev.0.41) > NOTICE: BL2: [COLD_BOOT] > NOTICE: BL2: DRAM Split is 2ch > NOTICE: BL2: QoS is default setting(rev.0.19) > NOTICE: BL2: CH0: 400000000 - 43fffffff, 1 GiB > NOTICE: BL2: CH2: 600000000 - 63fffffff, 1 GiB > NOTICE: BL2: Lossy Decomp areas > NOTICE: Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570 > NOTICE: Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0 > NOTICE: Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0 > NOTICE: BL2: FDT at 0xe6325f70 > NOTICE: BL2: v2.5(release):ca03ad653-dirty > NOTICE: BL2: Built : 03:06:40, Jun 29 2020 > NOTICE: BL2: Normal boot > NOTICE: BL2: dst=0xe6325800 src=0x8180000 len=512(0x200) > NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800) > NOTICE: rcar_file_len: len: 0x0003e000 > NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=253952(0x3e000) > NOTICE: rcar_file_len: len: 0x00200000 > NOTICE: BL2: dst=0x44100000 src=0x8200000 len=2097152(0x200000) > NOTICE: rcar_file_len: len: 0x00100000 > NOTICE: BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000) > NOTICE: BL2: Booting BL31 > > > U-Boot 2020.10 (Jun 29 2020 - 03:06:40 +0000) > > CPU: Renesas Electronics R8A7796 rev 1.0 > Model: Renesas M3ULCB board based on r8a77960 > DRAM: 1.9 GiB > RAM Configuration: > Bank #0: 0x048000000 - 0x07fffffff, 896 MiB > Bank #1: 0x600000000 - 0x63fffffff, 1 GiB > > MMC: sd@ee100000: 0, sd@ee140000: 1 > Loading Environment from MMC... OK > In: serial@e6e88000 > Out: serial@e6e88000 > Err: serial@e6e88000 > Net: eth0: ethernet@e6800000 > Hit any key to stop autoboot: 0 > 37122560 bytes read in 400 ms (88.5 MiB/s) > 75544 bytes read in 3 ms (24 MiB/s) > Moving Image from 0x48080000 to 0x48200000, end=4a600000 > ## Flattened Device Tree blob at 48000000 > Booting using the fdt blob at 0x48000000 > Using Device Tree in place at 0000000048000000, end 0000000048015717 > > Starting kernel ... > > [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073] > [ 0.000000] Linux version 5.10.41-yocto-standard (oe-user@oe-host) > (aarch64-agl-linux-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) > #1 SMP PREEMPT M > on Jun 29 03:06:40 UTC 2020 > [ 0.000000] Machine model: Renesas M3ULCB board based on r8a77960 > [ 0.000000] printk: debug: ignoring loglevel setting. > [ 0.000000] efi: UEFI not found. > [ 0.000000] Reserved memory: created CMA memory pool at > 0x0000000057000000, size 16 MiB > [ 0.000000] OF: reserved mem: initialized node linux,adsp, compatible id > shared-dma-pool > [ 0.000000] Reserved memory: created CMA memory pool at > 0x0000000058000000, size 384 MiB > [ 0.000000] OF: reserved mem: initialized node linux,cma@57000000, > compatible id shared-dma-pool > [ 0.000000] Reserved memory: created CMA memory pool at > 0x0000000070000000, size 256 MiB > [ 0.000000] OF: reserved mem: initialized node linux,multimedia@70000000, > compatible id shared-dma-pool > [ 0.000000] NUMA: No NUMA configuration found > [ 0.000000] NUMA: Faking a node at [mem > 0x0000000048000000-0x000000063fffffff] > [ 0.000000] NUMA: NODE_DATA [mem 0x63fbf6b00-0x63fbf8fff] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000048000000-0x00000000ffffffff] > [ 0.000000] DMA32 empty > [ 0.000000] Normal [mem 0x0000000100000000-0x000000063fffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000048000000-0x0000000053ffffff] > [ 0.000000] node 0: [mem 0x0000000054000000-0x0000000056ffffff] > [ 0.000000] node 0: [mem 0x0000000057000000-0x000000007fffffff] > [ 0.000000] node 0: [mem 0x0000000600000000-0x000000063fffffff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000048000000-0x000000063fffffff] > [ 0.000000] On node 0 totalpages: 491520 > [ 0.000000] DMA zone: 3584 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 229376 pages, LIFO batch:63 > [ 0.000000] Normal zone: 4096 pages used for memmap > [ 0.000000] Normal zone: 262144 pages, LIFO batch:63 > [ 0.000000] psci: probing for conduit method from DT. > [ 0.000000] psci: PSCIv1.1 detected in firmware. > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > [ 0.000000] psci: Trusted OS resident on physical CPU 0x0 > [ 0.000000] psci: SMC Calling Convention v1.2 > [ 0.000000] percpu: Embedded 31 pages/cpu s89880 r8192 d28904 u126976 > [ 0.000000] pcpu-alloc: s89880 r8192 d28904 u126976 alloc=31*4096 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 > [ 0.000000] Detected PIPT I-cache on CPU0 > [ 0.000000] CPU features: detected: EL2 vector hardening > [ 0.000000] CPU features: detected: Spectre-v2 > [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or > 1530923 > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: console=ttySC0,115200 ignore_loglevel > vmalloc=384M video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk1p1 rw > rootfstype=ext4 root > wait rootdelay=2 > [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 > bytes, linear) > [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 > bytes, linear) > [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off > [ 0.000000] software IO TLB: mapped [mem > 0x0000000050000000-0x0000000054000000] (64MB) > [ 0.000000] Memory: 1101604K/1966080K available (16448K kernel code, > 3676K rwdata, 8916K rodata, 7104K init, 541K bss, 192732K reserved, 671744K > cma-reserved) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 > [ 0.000000] rcu: Preemptible hierarchical RCU implementation. > [ 0.000000] rcu: RCU event tracing is enabled. > [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to > nr_cpu_ids=6. > [ 0.000000] Trampoline variant of Tasks RCU enabled. > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is > 25 jiffies. > [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 > [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f102f000 > [ 0.000000] GIC: Using split EOI/Deactivate mode > [ 0.000000] random: get_random_bytes called from > start_kernel+0x38c/0x54c with crng_init=0 > [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys). > [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff > max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns > [ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every > 2199023255496ns > [ 0.000140] Console: colour dummy device 80x25 > [ 0.000224] Calibrating delay loop (skipped), value calculated using > timer frequency.. 16.66 BogoMIPS (lpj=33333) > [ 0.000235] pid_max: default: 32768 minimum: 301 > [ 0.000292] LSM: Security Framework initializing > [ 0.000346] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, > linear) > [ 0.000363] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 > bytes, linear) > [ 0.001750] rcu: Hierarchical SRCU implementation. > [ 0.003411] Detected Renesas R-Car Gen3 r8a7796 ES1.0 > [ 0.005246] EFI services will not be available. > [ 0.005536] smp: Bringing up secondary CPUs ... > [ 0.005995] Detected PIPT I-cache on CPU1 > [ 0.006056] CPU1: Booted secondary processor 0x0000000001 [0x411fd073] > [ 0.006590] CPU features: detected: ARM erratum 845719 > [ 0.006605] Detected VIPT I-cache on CPU2 > [ 0.006661] CPU2: Booted secondary processor 0x0000000100 [0x410fd034] > [ 0.007139] Detected VIPT I-cache on CPU3 > [ 0.007166] CPU3: Booted secondary processor 0x0000000101 [0x410fd034] > [ 0.007613] Detected VIPT I-cache on CPU4 > [ 0.007641] CPU4: Booted secondary processor 0x0000000102 [0x410fd034] > [ 0.008124] Detected VIPT I-cache on CPU5 > [ 0.008152] CPU5: Booted secondary processor 0x0000000103 [0x410fd034] > [ 0.008231] smp: Brought up 1 node, 6 CPUs > [ 0.008254] SMP: Total of 6 processors activated. > [ 0.008260] CPU features: detected: 32-bit EL0 Support > [ 0.008265] CPU features: detected: CRC32 instructions > [ 0.008270] CPU features: detected: 32-bit EL1 Support > [ 0.021404] CPU: All CPU(s) started at EL2 > [ 0.021440] alternatives: patching kernel code > [ 0.022449] devtmpfs: initialized > [ 0.028632] KASLR disabled due to lack of seed > [ 0.028777] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 7645041785100000 ns > [ 0.028793] futex hash table entries: 2048 (order: 5, 131072 bytes, > linear) > [ 0.037138] pinctrl core: initialized pinctrl subsystem > [ 0.038505] DMI not present or invalid. > [ 0.038887] NET: Registered protocol family 16 > [ 0.039786] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic > allocations > [ 0.039848] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic > allocations > [ 0.039928] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for > atomic allocations > [ 0.039971] audit: initializing netlink subsys (disabled) > [ 0.040146] audit: type=2000 audit(0.040:1): state=initialized > audit_enabled=0 res=1 > [ 0.041211] thermal_sys: Registered thermal governor 'power_allocator' > [ 0.041785] cpuidle: using governor menu > [ 0.042008] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. > [ 0.042102] ASID allocator initialised with 65536 entries > [ 0.043462] Serial: AMBA PL011 UART driver > [ 0.073814] sh-pfc e6060000.pinctrl: r8a77960_pfc support registered > [ 0.084673] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages > [ 0.084682] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages > [ 0.084687] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages > [ 0.084692] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages > [ 0.085753] cryptd: max_cpu_qlen set to 1000 > [ 0.087781] ACPI: Interpreter disabled. > [ 0.091051] rcar-avs: use avs value: 0 > [ 0.091065] rcar-avs: cpu@0 is running with: opp_table0 > [ 0.091072] rcar-avs: cpu@1 is running with: opp_table0 > [ 0.091085] rcar-avs: gsx@fd000000 is running with: gsx_opp_table0 > [ 0.092145] iommu: Default domain type: Translated > [ 0.092745] ipmmu-vmsa e67b0000.iommu: IPMMU context 0 is reserved > [ 0.093589] vgaarb: loaded > [ 0.093793] SCSI subsystem initialized > [ 0.093914] libata version 3.00 loaded. > [ 0.094063] usbcore: registered new interface driver usbfs > [ 0.094087] usbcore: registered new interface driver hub > [ 0.094110] usbcore: registered new device driver usb > [ 0.096308] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 > Hz > [ 0.096748] mc: Linux media interface: v0.10 > [ 0.096769] videodev: Linux video capture interface: v2.00 > [ 0.096820] pps_core: LinuxPPS API ver. 1 registered > [ 0.096825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo > Giometti <giometti@xxxxxxxx> > [ 0.096835] PTP clock support registered > [ 0.096985] EDAC MC: Ver: 3.0.0 > [ 0.098696] FPGA manager framework > [ 0.098752] Advanced Linux Sound Architecture Driver Initialized. > [ 0.099369] clocksource: Switched to clocksource arch_sys_counter > [ 0.545679] VFS: Disk quotas dquot_6.6.0 > [ 0.545731] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 > bytes) > [ 0.545881] pnp: PnP ACPI: disabled > [ 0.550251] NET: Registered protocol family 2 > [ 0.550408] IP idents hash table entries: 32768 (order: 6, 262144 bytes, > linear) > [ 0.551153] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, > 16384 bytes, linear) > [ 0.551203] TCP established hash table entries: 16384 (order: 5, 131072 > bytes, linear) > [ 0.551279] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, > linear) > [ 0.551448] TCP: Hash tables configured (established 16384 bind 16384) > [ 0.551565] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) > [ 0.551604] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, > linear) > [ 0.551738] NET: Registered protocol family 1 > [ 0.552066] RPC: Registered named UNIX socket transport module. > [ 0.552074] RPC: Registered udp transport module. > [ 0.552078] RPC: Registered tcp transport module. > [ 0.552081] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.552091] PCI: CLS 0 bytes, default 64 > [ 0.552963] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 > counters available > [ 0.553182] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 > counters available > [ 0.553612] kvm [1]: IPA Size Limit: 40 bits > [ 0.554434] kvm [1]: vgic interrupt IRQ9 > [ 0.554584] kvm [1]: Hyp mode initialized successfully > [ 0.557585] Initialise system trusted keyrings > [ 0.557709] workingset: timestamp_bits=42 max_order=19 bucket_order=0 > [ 0.560841] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 0.561240] NFS: Registering the id_resolver key type > [ 0.561263] Key type id_resolver registered > [ 0.561269] Key type id_legacy registered > [ 0.561320] nfs4filelayout_init: NFSv4 File Layout Driver Registering... > [ 0.561326] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver > Registering... > [ 0.561488] 9p: Installing v9fs 9p2000 file system support > [ 0.587278] Key type asymmetric registered > [ 0.587287] Asymmetric key parser 'x509' registered > [ 0.587320] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 243) > [ 0.587328] io scheduler mq-deadline registered > [ 0.587333] io scheduler kyber registered > [ 0.596992] gpio_rcar e6050000.gpio: driving 16 GPIOs > [ 0.597315] gpio_rcar e6051000.gpio: driving 29 GPIOs > [ 0.597587] gpio_rcar e6052000.gpio: driving 15 GPIOs > [ 0.597855] gpio_rcar e6053000.gpio: driving 16 GPIOs > [ 0.598103] gpio_rcar e6054000.gpio: driving 18 GPIOs > [ 0.598358] gpio_rcar e6055000.gpio: driving 26 GPIOs > [ 0.598610] gpio_rcar e6055400.gpio: driving 32 GPIOs > [ 0.598853] gpio_rcar e6055800.gpio: driving 4 GPIOs > [ 0.602141] EINJ: ACPI disabled. > [ 0.629280] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.631437] SuperH (H)SCI(F) driver initialized > [ 0.631862] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 121, > base_baud = 0) is a scif > [ 1.714624] printk: console [ttySC0] enabled > [ 1.719944] msm_serial: driver initialized > [ 1.729181] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller > v2.01a with HDCP (DWC HDMI 2.0 TX PHY) > [ 1.739103] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C > bus driver > [ 1.754923] loop: module loaded > [ 1.759353] megasas: 07.714.04.00-rc1 > [ 1.767144] libphy: Fixed MDIO Bus: probed > [ 1.772205] tun: Universal TUN/TAP device driver, 1.6 > [ 1.778028] thunder_xcv, ver 1.0 > [ 1.781288] thunder_bgx, ver 1.0 > [ 1.784533] nicpf, ver 1.0 > [ 1.788319] hclge is initializing > [ 1.791658] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - > version > [ 1.798880] hns3: Copyright (c) 2017 Huawei Corporation. > [ 1.804222] e1000: Intel(R) PRO/1000 Network Driver > [ 1.809103] e1000: Copyright (c) 1999-2006 Intel Corporation. > [ 1.814875] e1000e: Intel(R) PRO/1000 Network Driver > [ 1.819843] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. > [ 1.825782] igb: Intel(R) Gigabit Ethernet Network Driver > [ 1.831179] igb: Copyright (c) 2007-2014 Intel Corporation. > [ 1.836768] igbvf: Intel(R) Gigabit Virtual Function Network Driver > [ 1.843033] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. > [ 1.849271] sky2: driver version 1.30 > [ 1.854031] libphy: ravb_mii: probed > [ 1.860124] ravb e6800000.ethernet eth0: Base address at 0xe6800000, > 2e:09:0a:01:9a:b7, IRQ 118. > [ 1.870094] VFIO - User Level meta-driver version: 0.3 > [ 1.876853] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.883411] ehci-pci: EHCI PCI platform driver > [ 1.887882] ehci-platform: EHCI generic platform driver > [ 1.893433] ehci-platform ee0a0100.usb: EHCI Host Controller > [ 1.899114] ehci-platform ee0a0100.usb: new USB bus registered, assigned > bus number 1 > [ 1.907029] ehci-platform ee0a0100.usb: irq 158, io mem 0xee0a0100 > [ 1.927376] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10 > [ 1.933920] hub 1-0:1.0: USB hub found > [ 1.937691] hub 1-0:1.0: 1 port detected > [ 1.942033] ehci-orion: EHCI orion driver > [ 1.946281] ehci-exynos: EHCI Exynos driver > [ 1.950586] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 1.956802] ohci-pci: OHCI PCI platform driver > [ 1.961299] ohci-platform: OHCI generic platform driver > [ 1.966761] ohci-platform ee0a0000.usb: Generic Platform OHCI controller > [ 1.973479] ohci-platform ee0a0000.usb: new USB bus registered, assigned > bus number 2 > [ 1.981369] ohci-platform ee0a0000.usb: irq 158, io mem 0xee0a0000 > [ 2.077763] hub 2-0:1.0: USB hub found > [ 2.081533] hub 2-0:1.0: 1 port detected > [ 2.085821] ohci-exynos: OHCI Exynos driver > [ 2.090641] usbcore: registered new interface driver usb-storage > [ 2.099175] i2c /dev entries driver > [ 2.113056] cs2000-cp 2-004f: revision - C1 > [ 2.117324] i2c-rcar e6510000.i2c: probed > [ 2.127568] i2c-rcar e66d8000.i2c: probed > [ 2.137812] rcar_gen3_thermal e6198000.thermal: is using pseudo fixed > FUSE values > [ 2.149936] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip > points > [ 2.161378] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip > points > [ 2.172615] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 3 trip > points > [ 2.183840] sdhci: Secure Digital Host Controller Interface driver > [ 2.190059] sdhci: Copyright(c) Pierre Ossman > [ 2.195106] Synopsys Designware Multimedia Card Interface Driver > [ 2.195480] renesas_sdhi_internal_dmac ee100000.mmc: Got CD GPIO > [ 2.195655] renesas_sdhi_internal_dmac ee140000.mmc: Adding to iommu > group 0 > [ 2.195699] renesas_sdhi_internal_dmac ee140000.mmc: Using IPMMU context > 1 > [ 2.202130] sdhci-pltfm: SDHCI platform and OF driver helper > [ 2.228573] ledtrig-cpu: registered to indicate activity on CPUs > [ 2.235268] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... > [ 2.242219] usbcore: registered new interface driver usbhid > [ 2.245105] renesas_sdhi_internal_dmac ee140000.mmc: mmc0 base at > 0x00000000ee140000, max clock rate 200 MHz > [ 2.247802] usbhid: USB HID core driver > [ 2.250557] optee: probing for conduit method. > [ 2.265933] optee: revision 3.13 (93483d65) > [ 2.266207] optee driver R-Car Rev.1.0.11 > [ 2.274687] optee: initialized driver > [ 2.279426] usb 1-1: new high-speed USB device number 2 using > ehci-platform > [ 2.291124] random: fast init done > [ 2.299019] rcar_sound ec500000.sound: probed > [ 2.303946] NET: Registered protocol family 17 > [ 2.308514] 9pnet: Installing 9P2000 support > [ 2.312859] Key type dns_resolver registered > [ 2.317448] registered taskstats version 1 > [ 2.321552] Loading compiled-in X.509 certificates > [ 2.336126] thermal emergency: set temperature to 110 celsius > [ 2.342042] thermal emergency: shutdown target cpus 1-5 > [ 2.347268] thermal emergency: freq scaled target cpus 0 > [ 2.349961] mmc0: new HS200 MMC card at address 0001 > [ 2.353125] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs > [ 2.358272] mmcblk0: mmc0:0001 R1J55A 7.28 GiB > [ 2.367422] [drm] Initialized rcar-du 1.0.0 20130110 for > feb00000.display on minor 0 > [ 2.368976] mmcblk0boot0: mmc0:0001 R1J55A partition 1 8.00 MiB > [ 2.376370] [drm] Device feb00000.display probed > [ 2.382612] mmcblk0boot1: mmc0:0001 R1J55A partition 2 8.00 MiB > [ 2.392952] mmcblk0rpmb: mmc0:0001 R1J55A partition 3 4.00 MiB, chardev > (509:0) > [ 2.447445] hub 1-1:1.0: USB hub found > [ 2.451394] hub 1-1:1.0: 4 ports detected > [ 2.561771] Console: switching to colour frame buffer device 240x67 > [ 2.584179] rcar-du feb00000.display: [drm] fb0: rcar-dudrmfb frame > buffer device > [ 2.597373] cpu cpu0: EM: created perf domain > [ 2.602194] cpu cpu2: EM: created perf domain > [ 2.609898] renesas_sdhi_internal_dmac ee100000.mmc: Got CD GPIO > [ 2.618524] input: keyboard as /devices/platform/keyboard/input/input0 > [ 2.626145] ALSA device list: > [ 2.629141] #0: ak4613 > [ 2.631892] Waiting 2 sec before mounting root device... > [ 2.664660] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at > 0x00000000ee100000, max clock rate 200 MHz > [ 2.799377] usb 1-1.3: new low-speed USB device number 3 using > ehci-platform > [ 2.831779] mmc1: new ultra high speed SDR104 SDHC card at address 5048 > [ 2.838728] mmcblk1: mmc1:5048 SD32G 28.9 GiB > [ 2.844438] mmcblk1: p1 > [ 2.978657] input: Chicony HP Business Slim Keyboard as > /devices/platform/soc/ee0a0100.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:03F0:2F4A.0001/input/input1 > [ 3.051569] hid-generic 0003:03F0:2F4A.0001: input: USB HID v1.10 > Keyboard [Chicony HP Business Slim Keyboard] on usb-ee0a0100.usb-1.3/input0 > [ 3.069762] input: Chicony HP Business Slim Keyboard Consumer Control as > /devices/platform/soc/ee0a0100.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:03F0:2F4A.0002/input > /input2 > [ 3.143501] input: Chicony HP Business Slim Keyboard System Control as > /devices/platform/soc/ee0a0100.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:03F0:2F4A.0002/input/i > nput3 > [ 3.158229] input: Chicony HP Business Slim Keyboard as > /devices/platform/soc/ee0a0100.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:03F0:2F4A.0002/input/input4 > [ 3.171606] hid-generic 0003:03F0:2F4A.0002: input: USB HID v1.10 Device > [Chicony HP Business Slim Keyboard] on usb-ee0a0100.usb-1.3/input1 > [ 3.315376] usb 1-1.4: new low-speed USB device number 4 using > ehci-platform > [ 3.482018] input: PixArt USB Optical Mouse as > /devices/platform/soc/ee0a0100.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:04F2:0939.0003/input/input5 > [ 3.494642] hid-generic 0003:04F2:0939.0003: input: USB HID v1.11 Mouse > [PixArt USB Optical Mouse] on usb-ee0a0100.usb-1.4/input0 > [ 4.681136] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data > mode. Opts: (null) > [ 4.689352] VFS: Mounted root (ext4 filesystem) on device 179:97. > [ 4.696467] devtmpfs: mounted > [ 4.702523] Freeing unused kernel memory: 7104K > [ 4.707240] Run /sbin/init as init process > [ 4.711342] with arguments: > [ 4.714310] /sbin/init > [ 4.717018] with environment: > [ 4.720161] HOME=/ > [ 4.722515] TERM=linux > [ 4.725222] vmalloc=384M > [ 4.881508] systemd[1]: System time before build time, advancing clock. > [ 4.926152] NET: Registered protocol family 10 > [ 4.931709] Segment Routing with IPv6 > [ 4.955414] systemd[1]: systemd 244.5+ running in system mode. (+PAM > -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP > -GCRYPT -GNUTLS +ACL > +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 > default-hierarchy=hybrid) > [ 4.977810] systemd[1]: Detected architecture arm64. > > Welcome to Automotive Grade Linux 12.91.0+snapshot-20220205 (marlin)! > > [ 5.024504] systemd[1]: Set hostname to <m3ulcb>. > [ 5.273857] random: systemd: uninitialized urandom read (16 bytes read) > [ 5.280656] systemd[1]: system-getty.slice: unit configures an IP > firewall, but the local system does not support BPF/cgroup firewalling. > [ 5.293019] systemd[1]: (This warning is only shown for the first unit > using IP firewalling.) > [ 5.303475] systemd[1]: Created slice system-getty.slice. > [ OK ] Created slice system-getty.slice. > [ 5.323500] random: systemd: uninitialized urandom read (16 bytes read) > [ 5.330916] systemd[1]: Created slice system-serial\x2dgetty.slice. > [ OK ] Created slice system-serial\x2dgetty.slice. > [ 5.351479] random: systemd: uninitialized urandom read (16 bytes read) > [ 5.358786] systemd[1]: Created slice User and Session Slice. > [ OK ] Created slice User and Session Slice. > [ 5.379654] systemd[1]: Started Dispatch Password Requests to Console > Directory Watch. > [ OK ] Started Dispatch Password �…ts to Console Directory Watch. > [ 5.403550] systemd[1]: Started Forward Password Requests to Wall > Directory Watch. > [ OK ] Started Forward Password R�…uests to Wall Directory Watch. > [ 5.427515] systemd[1]: Reached target Host and Network Name Lookups. > [ OK ] Reached target Host and Network Name Lookups. > [ 5.451447] systemd[1]: Reached target Paths. > [ OK ] Reached target Paths. > [ 5.467445] systemd[1]: Reached target Remote File Systems. > [ OK ] Reached target Remote File Systems. > [ 5.487433] systemd[1]: Reached target Slices. > [ OK ] Reached target Slices. > [ 5.507444] systemd[1]: Reached target Swap. > [ OK ] Reached target Swap. > [ 5.526861] systemd[1]: Listening on Process Core Dump Socket. > [ OK ] Listening on Process Core Dump Socket. > [ 5.547685] systemd[1]: Listening on initctl Compatibility Named Pipe. > [ OK ] Listening on initctl Compatibility Named Pipe. > [ 5.571909] systemd[1]: Listening on Journal Audit Socket. > [ OK ] Listening on Journal Audit Socket. > [ 5.591713] systemd[1]: Listening on Journal Socket (/dev/log). > [ OK ] Listening on Journal Socket (/dev/log). > [ 5.611704] systemd[1]: Listening on Journal Socket. > [ OK ] Listening on Journal Socket. > [ 5.631775] systemd[1]: Listening on Network Service Netlink Socket. > [ OK ] Listening on Network Service Netlink Socket. > [ 5.655702] systemd[1]: Listening on udev Control Socket. > [ OK ] Listening on udev Control Socket. > [ 5.675600] systemd[1]: Listening on udev Kernel Socket. > [ OK ] Listening on udev Kernel Socket. > [ 5.698485] systemd[1]: Mounting Huge Pages File System... > Mounting Huge Pages File System... > [ 5.722137] systemd[1]: Mounting POSIX Message Queue File System... > Mounting POSIX Message Queue File System... > [ 5.746052] systemd[1]: Mounting Kernel Debug File System... > Mounting Kernel Debug File System... > [ 5.770998] systemd[1]: Mounting Temporary Directory (/tmp)... > Mounting Temporary Directory (/tmp)... > [ 5.791645] systemd[1]: Condition check resulted in Create list of > static device nodes for the current kernel being skipped. > [ 5.805425] systemd[1]: Starting Start psplash boot splash screen... > Starting Start psplash boot splash screen... > [ 5.827606] systemd[1]: Condition check resulted in File System Check on > Root Device being skipped. > [ 5.840185] systemd[1]: Starting Journal Service... > Starting Journal Service... > [ 5.914550] systemd[1]: Starting Load Kernel Modules... > Starting Load Kernel Modules... > [ 5.931114] mmngr: loading out-of-tree module taints kernel. > [ 5.938806] rgnmm_drv mmngr: assigned reserved memory node > linux,multimedia@70000000 > [ 5.958560] systemd[1]: Starting Remount Root and Kernel File Systems... > Starting Remount Root and Kernel File Systems... > [ 5.983603] systemd[1]: Starting udev Coldplug all Devices... > Starting udev Coldplug all Devices... > [ 5.993958] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null) > [ 6.007287] systemd[1]: Started Journal Service. > [ OK ] Started Journal Service. > [ OK ] Started Start psplash boot splash screen. > [ OK ] Mounted Huge Pages File System. > [ OK ] Mounted POSIX Message Queue File System. > [ OK ] Mounted Kernel Debug File System. > [ OK ] Mounted Temporary Directory (/tmp). > [ OK ] Started Load Kernel Modules. > [ OK ] Started Remount Root and Kernel File Systems. > Mounting Kernel Configuration File System... > [ OK ] Started Start psplash-syst�…progress communication helper. > Starting Flush Journal to Persistent Storage... > [ 6.220796] systemd-journald[268]: Received client request to flush > runtime journal. > Starting Apply Kernel Variables... > Starting Create Static Device Nodes in /dev... > [ OK ] Mounted Kernel Configuration File System. > [ OK ] Started Flush Journal to Persistent Storage. > [ OK ] Started Apply Kernel Variables. > [ OK ] Started Create Static Device Nodes in /dev. > [ OK ] Reached target Local File Systems (Pre). > Mounting /var/volatile... > Starting udev Kernel Device Manager... > [ OK ] Mounted /var/volatile. > Starting Load/Save Random Seed... > [ OK ] Reached target Local File Systems. > Starting Create Volatile Files and Directories... > [ OK ] Started udev Kernel Device Manager. > [ OK ] Started udev Coldplug all Devices. > [ OK ] Started Create Volatile Files and Directories. > Starting udev Wait for Complete Device Initialization... > Starting Update UTMP about System Boot/Shutdown... > [ OK ] Started Update UTMP about System Boot/Shutdown. > [ 7.059311] rcar_sound ec500000.sound: Can't update kctrl when idle > [ OK ] Started udev Wait for Complete Device Initialization. > [ OK ] Started Hardware RNG Entropy Gatherer Daemon. > [ OK ] Reached target System Initialization. > [ OK ] Started Daily Cleanup of Temporary Directories. > [ OK ] Reached target Timers. > [ OK ] Listening on D-Bus System Message Bus Socket. > [ OK ] Listening on dropbear.socket. > Starting Weston socket. > [ OK ] Listening on Weston socket. > [ OK ] Reached target Sockets. > [ OK ] Reached target Basic System. > Starting Save/Restore Sound Card State... > [ 7.283717] rcar_sound ec500000.sound: Can't update kctrl when idle > [ OK ] Started D-Bus System Message Bus. > Starting IPv6 Packet Filtering Framework... > Starting IPv4 Packet Filtering Framework... > Starting Telephony service... > Starting PowerVR consumer services... > Starting Login Service... > [ OK ] Started Save/Restore Sound Card State. > [ OK ] Started IPv6 Packet Filtering Framework. > [ 7.495439] random: crng init done > [ 7.498873] random: 7 urandom warning(s) missed due to ratelimiting > [ OK ] Started IPv4 Packet Filtering Framework. > [ OK ] Started Load/Save Random Seed. > [ OK ] Started Telephony service. > [ OK ] Reached target Network (Pre). > [ OK ] Reached target Sound Card. > Starting Connection service... > Starting Network Service... > [ 7.647740] PVR_K: 395: Read BVNC 4.45.2.58 from HW device registers > [ 7.654263] PVR_K: 395: RGX Device registered with BVNC 4.45.2.58 > [ 7.660948] pvrsrvkm fd000000.gsx: Found 4 OPP points. > [ 7.667406] pvrsrvkm fd000000.gsx: opp[1/4]: (200000000 Hz, 830000 uV) > [ 7.673968] pvrsrvkm fd000000.gsx: opp[2/4]: (300000000 Hz, 830000 uV) > [ 7.681296] pvrsrvkm fd000000.gsx: opp[3/4]: (400000000 Hz, 830000 uV) > [ 7.689316] pvrsrvkm fd000000.gsx: opp[4/4]: (600000000 Hz, 830000 uV) > [ 7.696624] DVFS : Changed GPU clock to 600000000 [Hz] > [ 7.705595] [drm] Initialized pvr 1.13.5878540 20170530 for fd000000.gsx > on minor 1 > [ OK ] Started PowerVR consumer services. > [ OK ] Started Login Service. > [ OK ] Started Network Service. > [ OK ] Started Connection service. > [ OK ] Reached target Network. > Starting Permit User Sessions... > [ OK ] Started Permit User Sessions. > [ OK ] Started Getty on tty1. > [ OK ] Started Serial Getty on ttySC0. > [ 7.966202] Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: > attached PHY driver [Micrel KSZ9031 Gigabit PHY] > (mii_bus:phy_addr=e6800000.ethernet-fff > fffff:00, irq=201) > [ OK ] Reached target Login Prompts. > [ OK ] Reached target Multi-User System. > Starting Hostname Service... > Starting Weston, a Wayland�…ositor, as a system service... > Starting WPA supplicant... > [ OK ] Created slice User Slice of UID 200. > Starting User Runtime Directory /run/user/200... > [ OK ] Started User Runtime Directory /run/user/200. > [ OK ] Started WPA supplicant. > [ OK ] Started Hostname Service. > Starting User Manager for UID 200... > [ 8.271081] audit: type=1006 audit(1593400003.383:2): pid=416 uid=0 > old-auid=4294967295 auid=200 tty=(none) old-ses=4294967295 ses=1 res=1 > [ OK ] Started User Manager for UID 200. > [ OK ] Started Session c1 of user weston. > [ 8.579792] audit: type=1006 audit(1593400003.695:3): pid=410 uid=0 > old-auid=4294967295 auid=200 tty=tty7 old-ses=4294967295 ses=2 res=1 > [ 8.743891] PVR_K: 410: RGX Firmware image 'rgx.fw.4.45.2.58' loaded > [FAILED] Failed to start Weston, a �…mpositor, as a system service. > See 'systemctl status weston.service' for details. > [DEPEND] Dependency failed for homescreen.service. > [ OK ] Reached target Graphical Interface. > Starting Update UTMP about System Runlevel Changes... > [ OK ] Started Update UTMP about System Runlevel Changes. > > Automotive Grade Linux 12.91.0+snapshot m3ulcb ttySC0 > > m3ulcb login: [ 10.432892] ravb e6800000.ethernet eth0: Link is Up - > 1Gbps/Full - flow control off > [ 10.440610] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > m3ulcb login: root > [ 163.713256] audit: type=1006 audit(1644248459.373:4): pid=435 uid=0 > old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 > root@m3ulcb:~# hostnamectl > Static hostname: m3ulcb > Icon name: computer > Machine ID: f51cb8aee7a349af8798f5d1877396df > Boot ID: f500b0a82b794079a2cd840b7ad30222 > Operating System: Automotive Grade Linux 12.91.0+snapshot-20220205 > (marlin) > Kernel: Linux 5.10.41-yocto-standard > Architecture: arm64 > root@m3ulcb:~# uname -a > Linux m3ulcb 5.10.41-yocto-standard #1 SMP PREEMPT Mon Jun 29 03:06:40 UTC > 2020 aarch64 GNU/Linux > root@m3ulcb:~# > > u-boot environment: > => printenv > baudrate=115200 > bootargs=console=ttySC0,115200 ignore_loglevel vmalloc=384M > video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk1p1 rw rootfstype=ext4 > rootwait rootdelay=2 > bootargs_root=root=/dev/mmcblk1p1 > bootcmd=run load_ker; run load_dtb; booti 0x48080000 - 0x48000000 > bootdaddr=0x48000000 > bootdelay=3 > bootkaddr=0x48080000 > bootmmc=0:1 > ethact=ravb > ethaddr=2e:09:0a:01:9a:b7 > fdt_high=0xffffffffffffffff > fdtcontroladdr=7bef4fb0 > fileaddr=48080000 > filesize=2367200 > initrd_high=0xffffffffffffffff > load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a77960-ulcb.dtb > load_ker=ext4load mmc 0:1 0x48080000 /boot/Image > platform=r8a7796 > stderr=serial@e6e88000 > stdin=serial@e6e88000 > stdout=serial@e6e88000 > ver=U-Boot 2020.10 (Jun 29 2020 - 03:06:40 +0000) > > Environment size: 735/131068 bytes > > Running "/usr/bin/agl-compositor --config /etc/xdg/weston/weston.ini > --idle-time=0 --debug" as user weston: > weston@m3ulcb:/lib/systemd/system$ /usr/bin/agl-compositor --config > /etc/xdg/weston/weston.ini --idle-time=0 --debug > Date: 2022-02-07 UTC > [16:21:40.603] Command line: /usr/bin/agl-compositor --config > /etc/xdg/weston/weston.ini --idle-time=0 --debug > [16:21:40.603] Using config file '/etc/xdg/weston/weston.ini'. > [16:21:40.603] Output repaint window is 34 ms maximum. > [16:21:40.603] Loading module '/usr/lib/libweston-8/drm-backend.so' > [16:21:40.608] initializing drm backend > [16:21:40.609] logind: failed to get session seat > [16:21:40.609] logind: cannot setup systemd-logind helper (-61), using > legacy fallback > [16:21:40.609] fatal: drm backend should be run using weston-launch binary, > or your system should provide the logind D-Bus API. > [16:21:40.609] fatal: failed to create compositor backend. > Internal warning: debug scope 'drm-backend' has not been destroyed. > > > Joel > > > > > > -- Marius Vlad -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#9649): https://lists.automotivelinux.org/g/agl-dev-community/message/9649 Mute This Topic: https://lists.automotivelinux.org/mt/88975775/2167316 Group Owner: agl-dev-community+owner@xxxxxxxxxxxxxxxxxxxxxxxxx Unsubscribe: https://lists.automotivelinux.org/g/agl-dev-community/leave/4543822/2167316/883735764/xyzzy [list-automotive-discussions82@xxxxxxxxxxx] -=-=-=-=-=-=-=-=-=-=-=-
Re: [master] m3ulcb - agl-compositor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [master] m3ulcb - agl-compositor
- From: "Marius Vlad" <marius.vlad@xxxxxxxxxxxxx>
- Date: Mon, 7 Feb 2022 20:29:09 +0200
- In-reply-to: <CABKMkPKOprOsk2JT8XCvSWHfE=jVYGBAL1HqEyfnDCC6QwYPQg@mail.gmail.com>
- Mailing-list: list agl-dev-community@xxxxxxxxxxxxxxxxxxxxxxxxx; contact agl-dev-community+owner@xxxxxxxxxxxxxxxxxxxxxxxxx
- References: <CABKMkPKOprOsk2JT8XCvSWHfE=jVYGBAL1HqEyfnDCC6QwYPQg@mail.gmail.com>
- Reply-to: agl-dev-community@xxxxxxxxxxxxxxxxxxxxxxxxx
- User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.13.0
- Follow-Ups:
- Re: [master] m3ulcb - agl-compositor
- From: Joel Winarske
- Re: [master] m3ulcb - agl-compositor
- References:
- [master] m3ulcb - agl-compositor
- From: Joel Winarske
- [master] m3ulcb - agl-compositor
- Prev by Date: [master] m3ulcb - agl-compositor
- Next by Date: Re: broken links on the website
- Previous by thread: [master] m3ulcb - agl-compositor
- Next by thread: Re: [master] m3ulcb - agl-compositor
- Index(es):
 |