[agl-dev-community] AGL Testing cycle of html5 build for icefish branch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello everyone,
you can find the results from the first test cycle of the html5 build on tip of icefish here:
https://jira.automotivelinux.org/secure/enav/#?query=project%20%3D%20%22SPEC%22%20AND%20fixVersion%20%3D%20%22Icefish%209.0.0%22%20AND%20cycleName%20in%20(%2220200227%20-%20WAM%20AGL%20Demo%20UI%20-%20Base%20Plan%22)

Testing summary:

Settings:
Bluetooth/Wifi sliders untap/click-able, effectively unable to switch bt/wifi on/off from GUI.
Version info does not show any information and stays at settings screen as if never tried to open it.

Bluetooth:
no bluetooth devices are found even bluetooth slider shows it is enabled. Clicking/tapping refresh/scan button in bluetooth does not work, however launching bluetoothctl from console and a forcing scan from CLI shows devices in the GUI, but changing the active tab or window is required in order to update the list with the available devices, otherwise the list does not update and stays empty. Returning back to the settings menu shows Bluetooth slider is enabled.
The results shown are correct, however when a device is tapped/clicked for pairing, pairing request shows up on the device and after pairing is accepted and the device shows "Couldn't pair with intel-corei7-64, incorrect pin or passkey" message after 15-20 seconds after accepting - tried several times on 2 android phones - Android 7 and 10, the behavior is the same.
Repeating pairing using bluetoothctl and confirming the passkey from cli is successful. The paired and connected device cannot be disconnected from the "Connected" tab and has to be disconnected manually via bluetoothctl.

Wifi:
The behavior is exactly the same as it is with bluetooth - connmanctl has to be used in order to authenticate/connect to a network. Refresh/scan does button not work. When the scan via connmanctl is complete the results are propagated in settings if tab or window is changed. While the first list item(network) is readable, every other item is crammed with very little vertical spacing causing the list with networks to be practically unreadable, overlapping each other. No networks can be tapped/clicked from the list to dis/connect or authenticate.

Audio:
After successful pairing and connecting to the phone, music can be streamed and heard properly from the device. I initially thought that audio metadata from phone is not shown into media player because I'm looking at my phone when changing tracks, however I noticed that media player is actually showing the metadata very briefly for probably about 50 msec and hiding it again.
Media player works ok with local audio and controls are functional. The "play'' button does not reflect playing/paused state when playing over bluetooth and is stuck on "play". Cover art is not showing up, or if it is - it's behind the playlist which takes almost all of the screen space.
On raspberrypi4 and h3ulcb audio is heard when streaming over bluetooth, however the media player does not show the playlist. On first boot for rpi4 this is the journal of lightmediascanner.service:
Feb 26 12:41:53 raspberrypi4 systemd[1]: Starting Lightmediascanner (LMS)...
Feb 26 12:41:53 raspberrypi4 lightmediascann[349]: Couldn't open '/var/volatile/tmp/lightmediascannerd.db': unable to open database file
Feb 26 12:41:54 raspberrypi4 systemd[1]: Started Lightmediascanner (LMS).
after removing the database and/or rebooting the issue persists.

HVAC, Dashboard, Mixer appear to be functional.

There are occasional SMACK denials in dmesg like this one:
[   74.888379] audit: type=1006 audit(1582914479.463:6): pid=880 uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1
[  170.835680] audit: type=1400 audit(1582914575.411:7): lsm=SMACK fn=smack_inode_permission action="" subject="User::App::webapps-hvac" object="User::App::webapps-html5-homescreen" requested=rw pid=921 comm="web-runtime" name="wamsocket.lock" dev="tmpfs" ino=24580
[  170.861164] audit: type=1300 audit(1582914575.411:7): arch=c00000b7 syscall=56 success=no exit=-13 a0=ffffffffffffff9c a1=558136fed0 a2=240 a3=1c0 items=0 ppid=920 pid=921 auid=4294967295 uid=1001 gid=1001 euid=1001 suid=1001 fsuid=1001 egid=1001 sgid=1001 fsgid=1001 tty=(none) s)
[  170.895572] audit: type=1327 audit(1582914575.411:7): proctitle=2F7573722F62696E2F7765622D72756E74696D6500687474703A2F2F6C6F63616C757365722D2D33333A383038302F696E6465782E68746D6C

Best regards
Eddie
_._,_._,_

Links:

You receive all messages sent to this group.

View/Reply Online (#8122) | Reply To Group | Reply To Sender | Mute This Topic | New Topic

Your Subscription | Contact Group Owner | Unsubscribe [list-automotive-discussions82@xxxxxxxxxxx]

_._,_._,_

[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux