|
Hi Jose,
Thanks for the systemctl output very helpful. I get no output from the status query.
I thought I should get the UI on the HDMI output or is it listening for a remote connection ?
If there is no network adaptor active will it still come up.
I had to disable the MOST service as I have no MOST onboard.
Kind Regards Marc
From: automotive-discussions-bounces@xxxxxxxxxxxxxxxxxxxxxxxxx <automotive-discussions-bounces@xxxxxxxxxxxxxxxxxxxxxxxxx> on behalf of José Bollo
<jose.bollo@xxxxxxx>
Sent: 10 October 2018 12:41:45 To: automotive-discussions@xxxxxxxxxxxxxxxxxxxxxxxxx Subject: Re: Flounder demo On Tue, 9 Oct 2018 21:33:53 +0000
Marc Murphy <marc.murphy@xxxxxxxxxxxxxx> wrote: > Ok now I have the system booting to a login prompt. > > The mmcblkp1 issue was a dodgy line in fstab... currently commented > out as not needed. > > Now the question is how to get the app up and running? Hi Marc, The log is correct. The audit message are reminder to "work in progress" issues. So you should see on the screen what is called the "homescreen". It is what is used to start applications. If you don't see the homescreen you have to check what's wrong. You should start by issuing the following command and check for reported errors. $ systemctl status *homescreen* *window* I attached the output for my running system. Best regards José Bollo > Bootlog now looks like; > [ 18.322913] Bluetooth: SCO socket layer initialized > [ 18.376561] usbcore: registered new interface driver btusb > [ 18.384646] Bluetooth: hci0: rtl: examining hci_ver=06 > hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 18.393506] Bluetooth: > hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 18.400053] > bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin > failed with error -2 [ 18.411864] Bluetooth: hci0: Failed to load > rtl_bt/rtl8723b_config.bin [ 18.419071] Bluetooth: hci0: rtl: > loading rtl_bt/rtl8723b_fw.bin [ 18.425239] bluetooth hci0: Direct > firmware load for rtl_bt/rtl8723b_fw.bin failed with error -2 > [ 18.434097] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin > [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill > Watch. [ OK ] Reached target Sockets. [ OK ] Reached target Basic > System. Starting neard service... Starting Save/Restore Sound Card > State... Starting Modem Manager... > Starting Telephony service... > [ OK ] Started D-Bus System Message Bus. > [ 20.410229] nfc: nfc_init: NFC Core ver 0.1 > [ 20.431933] NET: Registered protocol family 39 > [ OK ] Started neard service. > [ OK ] Started Telephony service. > Starting Connection service... > [ OK ] Started Hardware RNG Entropy Gatherer Daemon. > [ 20.620554] random: crng init done > Starting Start the security manager... > Starting Driver configuration for Unicens2... > Starting Initiate afm-system-setup... > [ OK ] Started System Logging Service. > Starting Login Service... > Starting Terminate Psplash Boot Screen... > [ OK ] Started Kernel Logging Service. > Starting Bluetooth service... > [ OK ] Reached target Containers. > Starting Disk Manager (legacy version)... > Starting Avahi mDNS/DNS-SD Stack... > [ OK ] Reached target cynara sockets. > Starting Cynara service... > [ OK ] Started Network Service. > [ OK ] Started Start the security manager. > [ OK ] Started Save/Restore Sound Card State. > [FAILED] Failed to start Driver configuration for Unicens2. > See 'systemctl status unicens-config.service' for details. > [ OK ] Started Terminate Psplash Boot Screen. > [ 21.627164] net eth0: initializing cpsw version 1.12 (0) > [ 21.695256] cpsw 4a100000.ethernet: initialized cpsw ale version > 1.4 [ 21.701658] cpsw 4a100000.ethernet: ALE Table size 1024 > [ 21.714221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 21.714227] Bluetooth: BNEP filters: protocol multicast > [ 21.714249] Bluetooth: BNEP socket layer initialized > [ OK ] Started Connection service. > [ OK ] Started Cynara service. > [ 21.963003] Atheros 8035 ethernet 4a101000.mdio:00: attached PHY > driver [Atheros 8035 ethernet] (mii_bus:phy_addr=4a101000.mdio:00, > irq=-1) [ 21.995379] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not > ready [ OK ] Started Bluetooth service. [ OK ] Started Avahi > mDNS/DNS-SD Stack. [ OK ] Started Disk Manager (legacy version). > [ OK ] Started Login Service. > [ OK ] Started Automount Disk Manager. > [ OK ] Reached target Bluetooth. > [ OK ] Started Bluetooth Audio ALSA Backend. > Starting Hostname Service... > Starting WPA supplicant... > Starting Authorization Manager... > Starting Load/Save RF Kill Switch Status... > [ OK ] Reached target Sound Card. > [ OK ] Started Initiate afm-system-setup. > Starting Weston Wayland Compositor... > [ OK ] Started Application Framework Master, system side. > [ OK ] Started Load/Save RF Kill Switch Status. > [ OK ] Started WPA supplicant. > [ OK ] Reached target Network. > Starting Permit User Sessions... > Starting Berkeley Internet Name Domain (DNS)... > [ OK ] Started Hostname Service. > [ OK ] Started Permit User Sessions. > [ OK ] Started Serial Getty on ttyS0. > [ OK ] Reached target Login Prompts. > [ OK ] Started Initiate afm-user-session 0. > [ 23.816423] audit: type=1006 audit(1539033327.180:2): pid=434 > uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) > old-ses=4294967295 ses=1 res=1 [ OK ] Started Authorization > Manager. [ OK ] Created slice User Slice of root. Starting User > Manager for UID 0... [ OK ] Started Session 1 of user root. > [ 24.722806] audit: type=1006 audit(1539033328.090:3): pid=445 > uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) > old-ses=4294967295 ses=2 res=1 [ 24.849378] audit: type=1400 > audit(1539033328.210:4): lsm=SMACK fn=smack_key_permission > action="" subject="System" object="_" requested=w pid=445 > comm="(systemd)" key_serial=450447809 > key_desc="_uid.0" [ 24.920244] audit: type=1400 > audit(1539033328.280:5): lsm=SMACK fn=smack_inode_permission > action="" subject="System" object="_" requested=w pid=437 > comm="named" name="bind" dev="mmcblk0p2" ino=27178 [ 24.920326] > audit: type=1300 audit(1539033328.280:5): arch=40000028 syscall=33 > per=800000 success=no exit=-13 a0=48dfdc a1=2 a2=558f2b00 a3=558f2b00 > items=0 ppid=432 pid=437 auid=4294967295 uid=987 gid=987 euid=987 > suid=987 fsuid=987 egid=987 sgid=987 fsgid=987 tty=(none) > ses=4294967295 comm="named" exe="/usr/sbin/named" subj=System > key=(null) [ 24.920384] audit: type=1327 audit(1539033328.280:5): > proctitle=2F7573722F7362696E2F6E616D6564002D750062696E64 [ OK ] > Started Modem Manager. [ 25.477327] audit: type=1300 > audit(1539033328.210:4): arch=40000028 syscall=311 per=800000 > success=no exit=-13 a0=8 a1=fffffffc a2=fffffffd a3=0 items=0 ppid=1 > pid=445 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 > fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/lib/systemd/systemd" > subj=System key=(null) [ OK ] Started Weston Wayland Compositor. > [ 25.698196] audit: type=1327 audit(1539033328.210:4): > proctitle="(systemd)" [ OK ] Started Berkeley Internet Name Domain > (DNS). [ OK ] Reached target Host and Network Name Lookups. > [ OK ] Reached target Multi-User System. Starting Update UTMP about > System Runlevel Changes... [ 26.163550] cpsw 4a100000.ethernet > eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 26.171500] > IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] > Started Update UTMP about System Runlevel Changes. [ 26.353379] > 8021q: 802.1Q VLAN Support v1.8 [ 26.380143] 8021q: adding VLAN 0 > to HW filter on device eth0 > > Automotive Grade Linux 6.0.0 beaglebone ttyS0 > > > Thanks > Marc > > > From: automotive-discussions-bounces@xxxxxxxxxxxxxxxxxxxxxxxxx > [mailto:automotive-discussions-bounces@xxxxxxxxxxxxxxxxxxxxxxxxx] On > Behalf Of Marc Murphy Sent: 09 October 2018 10:40 To: > automotive-discussions@xxxxxxxxxxxxxxxxxxxxxxxxx Subject: > Flounder demo > > Hello All > I have managed to get a build of Flounder booting on our BBE board > (based on a beaglebone black) and would like to know if there are any > setup requirements to get the demo application to launch. > > On boot most services seem to start, we get the psplash screen and > some messages scrolling on the progress bar. Watson application > doesn't seem to be started. Is there a filesystem or hardware > requirement for it to start? > > Last part of the boot log causes the system to go into recovery mode; > > [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill > Watch. Starting Load/Save RF Kill Switch Status... > [ OK ] Started Load/Save RF Kill Switch Status. > [*** ] A start job is running for dev-mmcblkp1.device (33s / 1min > 30s)[ 37.322585] random: crng init done [ TIME ] Timed out waiting > for device dev-mmcblkp1.device. [DEPEND] Dependency failed for /boot. > [DEPEND] Dependency failed for Local File Systems. > [ OK ] Closed Syslog Socket. > [ OK ] Reached target Login Prompts. > Starting Network Service... > [ OK ] Reached target Host and Network Name Lookups. > [ OK ] Reached target Bluetooth. > [ OK ] Reached target Sound Card. > [ OK ] Reached target cynara sockets. > [ OK ] Reached target Sockets. > Starting Rebuild Journal Catalog... > Starting Rebuild Dynamic Linker Cache... > [ OK ] Started Emergency Shell. > Starting Create Volatile Files and Directories... > [ OK ] Reached target Emergency Mode. > [ OK ] Reached target Timers. > [ OK ] Started Network Service. > [ OK ] Started Rebuild Journal Catalog. > [ OK ] Reached target Network. > [ OK ] Started Create Volatile Files and Directories. > Starting Update UTMP about System Boot/Shutdown... > [ OK ] Started Rebuild Dynamic Linker Cache. > [ OK ] Started Update UTMP about System Boot/Shutdown. > Starting Update UTMP about System Runlevel Changes... > Starting Update is Completed... > [ OK ] Started Update is Completed. > [ OK ] Started Update UTMP about System Runlevel Changes. > You are in emergency mode. After logging in, type "journalctl -xb" to > view system logs, "systemctl reboot" to reboot, "systemctl default" > or ^D to boot into default mode. > Press Enter for maintenance > (or press Control-D to continue): > > > Wondering why it would be waiting for dev-mmcblkp1.device. and what > is supposed to be on it ? > > Kind Regards > Marc |
Mem: 170952K used, 855532K free, 11680K shrd, 7804K buff, 81452K cached
CPU: 0% usr 0% sys 0% nic 99% idle 0% io 0% irq 0% sirq
Load average: 0.23 0.29 0.14 1/140 533
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
533 501 root R 3264 0% 1% top
66 2 root SW 0 0% 0% [kworker/0:2]
390 1 polkitd S 71800 7% 0% /usr/lib/polkit-1/polkitd --no-debug
336 1 root S 52100 5% 0% /usr/sbin/ModemManager
448 419 root S 44908 4% 0% /usr/bin/lightmediascannerd --startup-scan --directory=/media --directory=/home/0/Music
328 1 root S 42812 4% 0% /usr/bin/security-manager
385 1 root S 39480 4% 0% afm-system-daemon
406 1 bind S 37932 4% 0% /usr/sbin/named -u bind
389 1 root S 34588 3% 0% /usr/bin/bluealsa
387 1 display S 32352 3% 0% /usr/bin/weston --idle-time=0 --tty=1 --log=/run/platform/display/weston.log
323 1 root S 27472 3% 0% /usr/libexec/udisks-daemon --no-debug
1 0 root S 25196 2% 0% {systemd} /sbin/init
90 1 root S 13568 1% 0% /lib/systemd/systemd-journald
120 1 root S 13152 1% 0% /lib/systemd/systemd-udevd
388 1 root S 10364 1% 0% /usr/sbin/wpa_supplicant -u
321 1 root S 10080 1% 0% /usr/sbin/connmand -n
431 419 root S 9148 1% 0% (sd-pam)
458 403 root S 9144 1% 0% (sd-pam)
338 323 root S 8552 1% 0% udisks-daemon: not polling any devices
414 387 display S 7724 1% 0% /usr/libexec/weston-keyboard
419 1 root S 7244 1% 0% /lib/systemd/systemd --user
308 1 messageb S 7204 1% 0% /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activat
333 1 root S 7092 1% 0% /usr/sbin/ofonod -n
449 419 root S 6904 1% 0% /usr/bin/dbus-daemon --session --address=systemd: --nofork --nopidfile --systemd-activa
307 1 root S 5948 1% 0% /usr/libexec/nfc/neard -n
327 1 cynara S 5944 1% 0% /usr/bin/cynara
164 1 systemd- S 5724 1% 0% /lib/systemd/systemd-networkd
332 1 root S 5696 1% 0% /usr/libexec/bluetooth/bluetoothd
404 1 root S 5508 1% 0% /bin/login --
326 1 root S 5484 1% 0% /lib/systemd/systemd-logind
403 1 root S 5008 0% 0% /bin/systemctl --wait start afm-user-session@0.target
339 1 avahi S 4704 0% 0% avahi-daemon: running [beaglebone.local]
351 339 avahi S 4704 0% 0% avahi-daemon: chroot helper
501 404 root S 3920 0% 0% -sh
427 391 root S 3488 0% 0% udevadm monitor --udev -s block
391 1 root S 3404 0% 0% {automount.sh} /bin/sh /usr/libexec/automount.sh
428 391 root S 3404 0% 0% {automount.sh} /bin/sh /usr/libexec/automount.sh
447 419 root S 3236 0% 0% /usr/bin/afm-user-daemon --user-dbus=unix:path=/run/user/0/bus unix:/run/platform/apis/
349 1 root S 2800 0% 0% /sbin/syslogd -n
330 1 root S 2800 0% 0% /sbin/klogd -n
342 1 root S 1704 0% 0% /usr/sbin/rngd -f -r /dev/urandom
67 2 root SW 0 0% 0% [mmcqd/0]
3 2 root SW 0 0% 0% [ksoftirqd/0]
4 2 root SW 0 0% 0% [kworker/0:0]
7 2 root SW 0 0% 0% [rcu_preempt]
6 2 root SW 0 0% 0% [kworker/u2:0]
13 2 root SW 0 0% 0% [kworker/0:1]
264 2 root SW< 0 0% 0% [kworker/u3:0]
69 2 root SW 0 0% 0% [irq/159-44e0b00]
77 2 root SW< 0 0% 0% [kworker/0:1H]
11 2 root SW 0 0% 0% [kdevtmpfs]
71 2 root SW 0 0% 0% [mmcqd/1]
268 2 root SW< 0 0% 0% [kworker/u3:2]
2 0 root SW 0 0% 0% [kthreadd]
5 2 root SW< 0 0% 0% [kworker/0:0H]
8 2 root SW 0 0% 0% [rcu_sched]
9 2 root SW 0 0% 0% [rcu_bh]
10 2 root SW< 0 0% 0% [lru-add-drain]
12 2 root SW< 0 0% 0% [netns]
14 2 root SW 0 0% 0% [oom_reaper]
15 2 root SW< 0 0% 0% [writeback]
16 2 root SW 0 0% 0% [kcompactd0]
17 2 root SW< 0 0% 0% [crypto]
18 2 root SW< 0 0% 0% [bioset]
19 2 root SW< 0 0% 0% [kblockd]
20 2 root SW< 0 0% 0% [edac-poller]
21 2 root SW< 0 0% 0% [watchdogd]
22 2 root SW< 0 0% 0% [rpciod]
23 2 root SW< 0 0% 0% [xprtiod]
24 2 root SW 0 0% 0% [kswapd0]
25 2 root SW< 0 0% 0% [nfsiod]
34 2 root SW< 0 0% 0% [kpcitest]
35 2 root SW< 0 0% 0% [bioset]
36 2 root SW< 0 0% 0% [bioset]
37 2 root SW< 0 0% 0% [bioset]
38 2 root SW< 0 0% 0% [bioset]
39 2 root SW< 0 0% 0% [bioset]
40 2 root SW< 0 0% 0% [bioset]
41 2 root SW< 0 0% 0% [bioset]
42 2 root SW< 0 0% 0% [bioset]
43 2 root SW< 0 0% 0% [bioset]
44 2 root SW< 0 0% 0% [bioset]
45 2 root SW< 0 0% 0% [bioset]
46 2 root SW< 0 0% 0% [bioset]
47 2 root SW< 0 0% 0% [bioset]
48 2 root SW< 0 0% 0% [bioset]
49 2 root SW< 0 0% 0% [bioset]
50 2 root SW< 0 0% 0% [bioset]
51 2 root SW< 0 0% 0% [bioset]
52 2 root SW< 0 0% 0% [bioset]
53 2 root SW< 0 0% 0% [bioset]
54 2 root SW< 0 0% 0% [bioset]
55 2 root SW< 0 0% 0% [bioset]
56 2 root SW< 0 0% 0% [bioset]
57 2 root SW< 0 0% 0% [bioset]
58 2 root SW< 0 0% 0% [bioset]
59 2 root SW 0 0% 0% [kworker/u2:1]
61 2 root SW 0 0% 0% [irq/33-48060000]
62 2 root SW 0 0% 0% [irq/180-4803800]
Welcome to Automotive Grade Linux 6.0.0 (flounder)!
[ 3.294032] systemd[1]: Set hostname to <beaglebone>.
[ 3.943795] systemd[1]: Configuration file /lib/systemd/system/pvr.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 4.041784] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 4.074454] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 4.104174] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 4.148404] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 4.182876] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 4.219403] systemd[1]: Mounting Temporary Directory (/tmp)...
Mounting Temporary Directory (/tmp)...
[ OK ] Reached target Slices.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on Journal Socket.
Mounting POSIX Message Queue File System...
Starting Remount Root and Kernel File Systems...
[ OK ] Listening on Journal Socket (/dev/log).
Starting Setup Virtual Console...
[ OK ] Listening on Syslog Socket.
[ 4.494941] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Starting Load Kernel Modules...
[ OK ] Created slice system-getty.slice.
Starting PVR service...
[ OK ] Reached target Remote File Systems.
[ 4.643084] mostcore: loading out-of-tree module taints kernel.
[ 4.651334] mostcore: init()
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 4.671879] aim_cdev: init()
[ 4.675144] mostcore: registered new application interfacing module cdev
[ OK ] Listening on udev Control Socket.
[ 4.699247] mostcore: registered new application interfacing module networking
[ 4.718401] aim_sound: init()
[ 4.722002] mostcore: registered new application interfacing module sound
[ OK ] Created slice system-afm\x2duser\x2dsession.slice.
[ 4.742184] mostcore: registered new application interfacing module v4l
[ OK ] Listening on Journal Audit Socket.
Starting Journal Service...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 4.842231] usbcore: registered new interface driver usbfs
[ 4.853873] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1
[ OK ] Listening on udev Kernel Socket.
[ 4.880488] usbcore: registered new interface driver hub
[ OK ] Reached target Paths.
[ 4.904659] usbcore: registered new device driver usb
[ 4.936249] usbcore: registered new interface driver hdm_usb
[ 4.978288] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ]
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Temporary Directory (/tmp).
[ OK ] Started Journal Service.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Load Kernel Modules.
[ OK ] Started PVR service.
Starting Apply Kernel Variables...
Mounting Kernel Configuration File System...
Starting Create System Users...
Starting Rebuild Hardware Database...
Starting Flush Journal to Persistent Storage...
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create System Users.
[ 5.659042] systemd-journald[101]: Received request to flush runtime journal from PID 1
Starting Create Static Device Nodes in /dev...
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
Mounting /var/volatile...
[ OK ] Mounted /var/volatile.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
Starting Rebuild Dynamic Linker Cache...
Starting Rebuild Journal Catalog...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Load/Save Random Seed.
Starting Setup Virtual Console...
[ OK ] Started Rebuild Journal Catalog.
[ OK ] Started Create Volatile Files and Directories.
[ OK ] Started Setup Virtual Console.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Rebuild Dynamic Linker Cache.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Rebuild Hardware Database.
Starting Update is Completed...
Starting udev Coldplug all Devices...
[ OK ] Started Update is Completed.
[ OK ] Found device /dev/ttyS0.
[ 11.139792] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 11.201811] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ OK ] Started udev Coldplug all Devices.
[ OK ] Reached target System Initialization.
[ OK ] Listening on afm-system-daemon.socket.
[ OK ] Listening on GPS (Global Positioning System) Daemon Sockets.
[ OK ] Started dnf-automatic-install timer.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on cynara-admin.socket.
[ OK ] Started dnf-automatic-notifyonly timer.
[ OK ] Listening on security-manager.socket.
[ OK ] Started Daily Cleanup of Temporary Directories.
Starting sshd.socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Started dnf makecache timer.
[ OK ] Listening on cynara.socket.
Starting Network Service...
Starting cynara-monitor-get.socket.
[ 11.949010] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
Starting cynara-agent.socket.
[ OK ] Started dnf-automatic-download timer.
[ OK ] Reached target Timers.
Starting Start Psplash Boot Screen...
[ 12.148748] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 12.230881] omap-aes 53500000.aes: will run requests pump with realtime priority
[ 12.273774] remoteproc remoteproc0: wkup_m3 is available
[ 12.444194] remoteproc remoteproc0: powering up wkup_m3
[ 12.450907] PM: Cannot get wkup_m3_ipc handle
[ 12.468241] PM: Cannot get wkup_m3_ipc handle
[ OK ] Listening on sshd.socket.
[ 12.616329] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 224616
[ OK ] Listening on cynara-monitor-get.socket.
[ 12.716325] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 12.716345] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
[ 12.740564] asoc-simple-card sound: hdmi-hifi.0 <-> 48038000.mcasp mapping ok
[ OK ] Listening on cynara-agent.socket.
[ 12.893572] PM: Cannot get wkup_m3_ipc handle
[ OK ] Started Start Psplash Boot Screen.
[ 15.152011] PM: bootloader does not support rtc-only!
[ 15.989975] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 16.113521] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 16.179985] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 16.259815] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ 16.338082] hub 1-0:1.0: USB hub found
[ 16.372628] hub 1-0:1.0: 1 port detected
[ 16.765423] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices
[ 16.832557] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 16.924801] irq: no irq domain found for /ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 !
[ 16.963323] irq: no irq domain found for /ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 !
[ 17.005007] hub 1-1:1.0: USB hub found
[ 17.032657] hub 1-1:1.0: 4 ports detected
[ 17.067981] remoteproc remoteproc1: 4a334000.pru0 is available
[ 17.098630] pru-rproc 4a334000.pru0: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a334000 probed successfully
[ 17.153024] remoteproc remoteproc2: 4a338000.pru1 is available
[ 17.158995] pru-rproc 4a338000.pru1: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a338000 probed successfully
[ 17.382638] usb 1-1.4: new high-speed USB device number 3 using musb-hdrc
[ 17.692877] Bluetooth: Core ver 2.22
[ 17.703247] NET: Registered protocol family 31
[ 17.707733] Bluetooth: HCI device and connection manager initialized
[ 17.732836] Bluetooth: HCI socket layer initialized
[ 17.737766] Bluetooth: L2CAP socket layer initialized
[ 17.752680] Bluetooth: SCO socket layer initialized
[ 17.791591] usbcore: registered new interface driver btusb
[ 17.801469] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 17.801477] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 17.803059] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 17.803074] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin
[ 17.803078] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 17.808478] Bluetooth: hci0: rom_version status=0 version=1
[ 17.808573] Bluetooth: cfg_sz 0, total size 22496
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Reached target cynara sockets.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started D-Bus System Message Bus.
Starting Connection service...
Starting Login Service...
Starting Modem Manager...
Starting Telephony service...
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
Starting Initiate afm-system-setup...
[ 19.969969] random: crng init done
Starting Terminate Psplash Boot Screen...
Starting Cynara service...
Starting Bluetooth service...
Starting neard service...
Starting Start the security manager...
[ OK ] Started Kernel Logging Service.
Starting Save/Restore Sound Card State...
[ OK ] Reached target Containers.
[ OK ] Started System Logging Service.
Starting Disk Manager (legacy version)...
[ OK ] Started Network Service.
[ OK ] Started Cynara service.
[ OK ] Started Terminate Psplash Boot Screen.
[ 20.922582] nfc: nfc_init: NFC Core ver 0.1
[ OK ] Started Save/Restore Sound Card State.
[ 20.963291] NET: Registered protocol family 39
[ 20.970346] net eth0: initializing cpsw version 1.12 (0)
[ 20.970357] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ 20.970362] cpsw 4a100000.ethernet: ALE Table size 1024
[ 20.994200] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.994205] Bluetooth: BNEP filters: protocol multicast
[ 20.994225] Bluetooth: BNEP socket layer initialized
[ 21.063077] Atheros 8035 ethernet 4a101000.mdio:00: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
[ 21.124841] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ OK ] Started Start the security manager.
[ OK ] Started Telephony service.
[ OK ] Started Connection service.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started neard service.
[ OK ] Started Bluetooth service.
[ OK ] Started Initiate afm-system-setup.
[ OK ] Started Disk Manager (legacy version).
[ OK ] Started Login Service.
[ OK ] Started Automount Disk Manager.
Starting Weston Wayland Compositor...
[ OK ] Started Application Framework Master, system side.
[ OK ] Reached target Bluetooth.
[ OK ] Started Bluetooth Audio ALSA Backend.
Starting Hostname Service...
Starting WPA supplicant...
Starting Authorization Manager...
Starting Load/Save RF Kill Switch Status...
[ OK ] Reached target Sound Card.
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Started WPA supplicant.
[ OK ] Reached target Network.
Starting Berkeley Internet Name Domain (DNS)...
Starting Permit User Sessions...
[ 22.911604] Bluetooth: RFCOMM TTY layer initialized
[ 22.949318] Bluetooth: RFCOMM socket layer initialized
[ 22.949367] Bluetooth: RFCOMM ver 1.11
[ OK ] Started Hostname Service.
[ OK ] Started Permit User Sessions.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started Initiate afm-user-session 0.
[ 23.464013] audit: type=1006 audit(1539033327.320:2): pid=411 uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1
[ OK ] Started Weston Wayland Compositor.
[ OK ] Started Authorization Manager.
[ OK ] Created slice User Slice of root.
Starting User Manager for UID 0...
[ 24.345344] audit: type=1006 audit(1539033328.200:3): pid=423 uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
[ OK ] Started Session 1 of user root.
[ 24.415938] audit: type=1400 audit(1539033328.270:4): lsm=SMACK fn=smack_key_permission action=denied subject="System" object="_" requested=w pid=423 comm="(systemd)" key_serial=81150095 key_desc="_uid.0"
[ 24.646361] audit: type=1400 audit(1539033328.500:5): lsm=SMACK fn=smack_inode_permission action=denied subject="System" object="_" requested=w pid=415 comm="named" name="bind" dev="mmcblk0p2" ino=27178
[ 24.646437] audit: type=1300 audit(1539033328.500:5): arch=40000028 syscall=33 per=800000 success=no exit=-13 a0=4cbfdc a1=2 a2=c6742c00 a3=c6742c00 items=0 ppid=409 pid=415 auid=4294967295 uid=987 gid=987 euid=987 suid=987 fsuid=987 egid=987 sgid=987 fsgid=987 tty=(none) ses=4294967295 comm="named" exe="/usr/sbin/named" subj=System key=(null)
[ 24.646490] audit: type=1327 audit(1539033328.500:5): proctitle=2F7573722F7362696E2F6E616D6564002D750062696E64
[ OK ] Started Modem Manager.
[ 25.094346] audit: type=1300 audit(1539033328.270:4): arch=40000028 syscall=311 per=800000 success=no exit=-13 a0=8 a1=fffffffc a2=fffffffd a3=0 items=0 ppid=1 pid=423 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/lib/systemd/systemd" subj=System key=(null)
[ 25.323194] audit: type=1327 audit(1539033328.270:4): proctitle="(systemd)"
[ OK ] Reached target Multi-User System.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Started Update UTMP about System Runlevel Changes.
[ OK ] Started User Manager for UID 0.
Automotive Grade Linux 6.0.0 beaglebone ttyS0beaglebone:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.69-g89d085d1a4 (oe-user@oe-host) (gcc version 7.3.0 (GCC) ) #1 PREEMPT Mon Oct 8 22:29:46 UTC 2018
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 48 MiB at 0xbd000000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0d468b8, node_mem_map ef6f9000
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon)
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=PARTUUID=39c55d41-02 rw rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 976308K/1048576K available (8192K kernel code, 292K rwdata, 2516K rodata, 1024K init, 292K bss, 23116K reserved, 49152K cma-reserved, 212992K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0900000 (9184 kB)
.init : 0xc0c00000 - 0xc0d00000 (1024 kB)
.data : 0xc0d00000 - 0xc0d490e8 ( 293 kB)
.bss : 0xc0d490e8 - 0xc0d92364 ( 293 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000030] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000039] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000189] clocksource_probe: no matching clocksources found
[ 0.000357] Console: colour dummy device 80x30
[ 0.000382] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.000388] This ensures that you still see kernel messages. Please
[ 0.000392] update your kernel commandline.
[ 0.000414] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.089252] pid_max: default: 32768 minimum: 301
[ 0.089350] Security Framework initialized
[ 0.089364] Smack: Initializing.
[ 0.089368] Smack: IPv6 port labeling enabled.
[ 0.089415] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.089424] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.090190] CPU: Testing write buffer coherency: ok
[ 0.090555] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.091291] EFI services will not be available.
[ 0.092526] devtmpfs: initialized
[ 0.102471] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.102797] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.102822] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.106122] pinctrl core: initialized pinctrl subsystem
[ 0.107276] NET: Registered protocol family 16
[ 0.108868] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.121731] omap_hwmod: debugss: _wait_target_disable failed
[ 0.199241] cpuidle: using governor ladder
[ 0.229232] cpuidle: using governor menu
[ 0.232975] gpio gpiochip0: (gpio): added GPIO chardev (254:0)
[ 0.233358] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio)
[ 0.234609] OMAP GPIO hardware version 0.1
[ 0.235378] gpio gpiochip1: (gpio): added GPIO chardev (254:1)
[ 0.235700] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio)
[ 0.237423] gpio gpiochip2: (gpio): added GPIO chardev (254:2)
[ 0.237807] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio)
[ 0.239653] gpio gpiochip3: (gpio): added GPIO chardev (254:3)
[ 0.239964] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio)
[ 0.248338] No ATAGs?
[ 0.248363] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.286396] edma 49000000.edma: TI EDMA DMA engine driver
[ 0.286696] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]'
[ 0.289427] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ 0.289481] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
[ 0.289594] media: Linux media interface: v0.10
[ 0.289647] Linux video capture interface: v2.00
[ 0.289706] pps_core: LinuxPPS API ver. 1 registered
[ 0.289712] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.289733] PTP clock support registered
[ 0.289767] EDAC MC: Ver: 3.0.0
[ 0.290749] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 0.291063] Advanced Linux Sound Architecture Driver Initialized.
[ 0.291647] NetLabel: Initializing
[ 0.291658] NetLabel: domain hash size = 128
[ 0.291663] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.291737] NetLabel: unlabeled traffic allowed by default
[ 0.292353] clocksource: Switched to clocksource timer1
[ 0.302495] NET: Registered protocol family 2
[ 0.303203] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.303278] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.303346] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.303434] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.303456] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.303590] NET: Registered protocol family 1
[ 0.304001] RPC: Registered named UNIX socket transport module.
[ 0.304011] RPC: Registered udp transport module.
[ 0.304016] RPC: Registered tcp transport module.
[ 0.304021] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.304034] PCI: CLS 0 bytes, default 64
[ 0.304915] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 0.306337] audit: initializing netlink subsys (disabled)
[ 0.306406] audit: type=2000 audit(0.290:1): initialized
[ 0.307100] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.313970] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.314824] NFS: Registering the id_resolver key type
[ 0.314863] Key type id_resolver registered
[ 0.314870] Key type id_legacy registered
[ 0.314912] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.316739] bounce: pool size: 64 pages
[ 0.316956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.316969] io scheduler noop registered
[ 0.316975] io scheduler deadline registered
[ 0.317106] io scheduler cfq registered (default)
[ 0.318312] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.320514] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/clk_mcasp0[0]' - status (0)
[ 0.379875] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 0.383503] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
[ 1.021101] console [ttyS0] enabled
[ 1.026266] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 1.033087] [drm] Initialized
[ 1.049099] brd: module loaded
[ 1.058173] loop: module loaded
[ 1.063454] libphy: Fixed MDIO Bus: probed
[ 1.142422] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 1.148559] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 1.155646] libphy: 4a101000.mdio: probed
[ 1.159685] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver Atheros 8035 ethernet
[ 1.169684] cpsw 4a100000.ethernet: Detected MACID = 98:84:e3:ae:fd:f6
[ 1.176469] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies)
[ 1.185345] mousedev: PS/2 mouse device common for all mice
[ 1.191460] i2c /dev entries driver
[ 1.196640] cpuidle: enable-method property 'ti,am3352' found operations
[ 1.204248] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd
[ 1.204257] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 1.204281] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0)
[ 1.204353] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 1.208998] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp
[ 1.209003] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 1.209010] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]'
[ 1.209016] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]'
[ 1.209020] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup
[ 1.209028] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed
[ 1.263082] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer cd
[ 1.263092] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 1.263101] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@481d8000[0]'
[ 1.263189] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@481d8000[0]'
[ 1.263195] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 1.263202] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed
[ 1.263211] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp
[ 1.263216] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 1.263222] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]'
[ 1.263226] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]'
[ 1.263231] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 1.263236] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed
[ 1.309736] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.319835] mmc0: new high speed SDHC card at address 59b4
[ 1.325876] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led2[0]' - status (0)
[ 1.326031] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led3[0]' - status (0)
[ 1.326146] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led4[0]' - status (0)
[ 1.326259] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led5[0]' - status (0)
[ 1.326646] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.338040] NET: Registered protocol family 10
[ 1.339193] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.339883] NET: Registered protocol family 17
[ 1.340144] Key type dns_resolver registered
[ 1.340318] omap_voltage_late_init: Voltage driver support not added
[ 1.341400] registered taskstats version 1
[ 1.376415] mmcblk0: mmc0:59b4 28HFQ 7.47 GiB
[ 1.382754] mmcblk0: p1 p2
[ 1.416490] random: fast init done
[ 1.423449] tps65217 0-0024: TPS65217 ID 0x6 version 1.2
[ 1.429366] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 1.451646] mmc1: new high speed MMC card at address 0001
[ 1.457792] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB
[ 1.462658] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB
[ 1.468818] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB
[ 1.476599] mmcblk1: p1
[ 1.574604] tda998x 0-0070: found TDA19988
[ 1.579905] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[ 1.586010] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.592667] [drm] No driver support for vblank timestamp query.
[ 1.696576] Console: switching to colour frame buffer device 160x64
[ 1.711521] tilcdc 4830e000.lcdc: fb0: frame buffer device
[ 1.743190] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 1.863295] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 1.871095] hctosys: unable to open rtc device (rtc0)
[ 1.876783] ALSA device list:
[ 1.879774] #0: Loopback 1
[ 2.567606] EXT4-fs (mmcblk0p2): recovery complete
[ 2.576181] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.584552] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.593262] devtmpfs: mounted
[ 2.600099] Freeing unused kernel memory: 1024K
[ 2.950604] systemd[1]: Successfully loaded Smack policies.
[ 2.963976] systemd[1]: Successfully loaded Smack/CIPSO policies.
[ 2.977694] systemd[1]: System time before build time, advancing clock.
[ 3.040956] systemd[1]: Relabelled /dev and /run in 37.052ms.
[ 3.078554] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[ 3.100559] systemd[1]: Detected architecture arm.
[ 3.133987] systemd[1]: Set hostname to <beaglebone>.
[ 3.759672] systemd[1]: Configuration file /lib/systemd/system/pvr.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 3.849776] systemd[1]: Reached target Swap.
[ 3.883103] systemd[1]: Listening on udev Kernel Socket.
[ 3.913088] systemd[1]: Listening on udev Control Socket.
[ 3.943174] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.983118] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.023075] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.787610] mostcore: loading out-of-tree module taints kernel.
[ 4.798945] pvrsrvkm: loading out-of-tree module taints kernel.
[ 4.836868] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1
[ 4.863737] mostcore: init()
[ 4.867117] aim_cdev: init()
[ 4.867205] mostcore: registered new application interfacing module cdev
[ 4.888395] mostcore: registered new application interfacing module networking
[ 4.893467] aim_sound: init()
[ 4.893512] mostcore: registered new application interfacing module sound
[ 4.916269] mostcore: registered new application interfacing module v4l
[ 4.979550] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 5.070811] usbcore: registered new interface driver usbfs
[ 5.077594] usbcore: registered new interface driver hub
[ 5.085612] usbcore: registered new device driver usb
[ 5.103780] usbcore: registered new interface driver hdm_usb
[ 5.164203] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ]
[ 5.728428] systemd-journald[90]: Received request to flush runtime journal from PID 1
[ 11.441984] rtc rtc0: 44e3e000.rtc: dev (253:0)
[ 11.442019] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 11.489463] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 12.126783] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 12.255134] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 12.282699] PM: Cannot get wkup_m3_ipc handle
[ 12.305599] remoteproc remoteproc0: wkup_m3 is available
[ 12.311882] PM: Cannot get wkup_m3_ipc handle
[ 12.311950] remoteproc remoteproc0: powering up wkup_m3
[ 12.326201] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 224616
[ 12.326472] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 12.326494] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
[ 12.752229] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]'
[ 12.752237] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]'
[ 12.753317] asoc-simple-card sound: hdmi-hifi.0 <-> 48038000.mcasp mapping ok
[ 12.778375] PM: bootloader does not support rtc-only!
[ 12.883663] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 12.918818] omap-aes 53500000.aes: will run requests pump with realtime priority
[ 15.728638] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset
[ 15.728654] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup
[ 15.728665] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 15.728672] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 15.728677] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup
[ 15.728685] am335x-phy-driver 47401300.usb-phy: lookup for GPIO reset failed
[ 15.728694] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect
[ 15.728698] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup
[ 15.728705] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 15.728710] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 15.728714] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup
[ 15.728719] am335x-phy-driver 47401300.usb-phy: lookup for GPIO vbus-detect failed
[ 15.728795] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 15.853315] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset
[ 15.853330] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup
[ 15.853344] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 15.853350] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 15.853356] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup
[ 15.853363] am335x-phy-driver 47401b00.usb-phy: lookup for GPIO reset failed
[ 15.853370] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect
[ 15.853375] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup
[ 15.853381] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 15.853386] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 15.853391] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup
[ 15.853396] am335x-phy-driver 47401b00.usb-phy: lookup for GPIO vbus-detect failed
[ 15.853474] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 15.919516] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 15.992622] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ 16.062989] hub 1-0:1.0: USB hub found
[ 16.097219] hub 1-0:1.0: 1 port detected
[ 16.552522] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 16.748352] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices
[ 16.757842] hub 1-1:1.0: USB hub found
[ 16.757910] hub 1-1:1.0: 4 ports detected
[ 16.896274] irq: no irq domain found for /ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 !
[ 16.959184] irq: no irq domain found for /ocp/pruss_soc_bus@4a326000/pruss@4a300000/intc@4a320000 !
[ 17.060033] remoteproc remoteproc1: 4a334000.pru0 is available
[ 17.072559] usb 1-1.4: new high-speed USB device number 3 using musb-hdrc
[ 17.089618] pru-rproc 4a334000.pru0: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a334000 probed successfully
[ 17.124094] remoteproc remoteproc2: 4a338000.pru1 is available
[ 17.130082] pru-rproc 4a338000.pru1: PRU rproc node /ocp/pruss_soc_bus@4a326000/pruss@4a300000/pru@4a338000 probed successfully
[ 17.357961] Bluetooth: Core ver 2.22
[ 17.372568] NET: Registered protocol family 31
[ 17.377056] Bluetooth: HCI device and connection manager initialized
[ 17.392833] Bluetooth: HCI socket layer initialized
[ 17.397761] Bluetooth: L2CAP socket layer initialized
[ 17.422878] Bluetooth: SCO socket layer initialized
[ 17.476926] usbcore: registered new interface driver btusb
[ 17.484114] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 17.493891] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 17.501853] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 17.511218] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin
[ 17.517870] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 17.529109] Bluetooth: hci0: rom_version status=0 version=1
[ 17.534941] Bluetooth: cfg_sz 0, total size 22496
[ 19.721641] nfc: nfc_init: NFC Core ver 0.1
[ 19.745707] NET: Registered protocol family 39
[ 20.559533] random: crng init done
[ 20.948909] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.996065] Bluetooth: BNEP filters: protocol multicast
[ 21.001400] Bluetooth: BNEP socket layer initialized
[ 21.392865] net eth0: initializing cpsw version 1.12 (0)
[ 21.398247] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ 21.499902] cpsw 4a100000.ethernet: ALE Table size 1024
[ 21.593015] Atheros 8035 ethernet 4a101000.mdio:00: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
[ 21.676759] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.128989] audit: type=1006 audit(1539033327.140:2): pid=403 uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1
[ 23.226917] Bluetooth: RFCOMM TTY layer initialized
[ 23.226949] Bluetooth: RFCOMM socket layer initialized
[ 23.227001] Bluetooth: RFCOMM ver 1.11
[ 24.170968] audit: type=1006 audit(1539033328.180:3): pid=419 uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
[ 24.287479] audit: type=1400 audit(1539033328.300:4): lsm=SMACK fn=smack_inode_permission action=denied subject="System" object="_" requested=w pid=406 comm="named" name="bind" dev="mmcblk0p2" ino=27178
[ 24.287554] audit: type=1300 audit(1539033328.300:4): arch=40000028 syscall=33 per=800000 success=no exit=-13 a0=4ccfdc a1=2 a2=bb3c8b00 a3=bb3c8b00 items=0 ppid=402 pid=406 auid=4294967295 uid=987 gid=987 euid=987 suid=987 fsuid=987 egid=987 sgid=987 fsgid=987 tty=(none) ses=4294967295 comm="named" exe="/usr/sbin/named" subj=System key=(null)
[ 24.287610] audit: type=1327 audit(1539033328.300:4): proctitle=2F7573722F7362696E2F6E616D6564002D750062696E64
[ 24.760654] audit: type=1400 audit(1539033328.770:5): lsm=SMACK fn=smack_key_permission action=denied subject="System" object="_" requested=w pid=419 comm="(systemd)" key_serial=319321738 key_desc="_uid.0"
[ 24.915632] audit: type=1300 audit(1539033328.770:5): arch=40000028 syscall=311 per=800000 success=no exit=-13 a0=8 a1=fffffffc a2=fffffffd a3=0 items=0 ppid=1 pid=419 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/lib/systemd/systemd" subj=System key=(null)
[ 25.123233] audit: type=1327 audit(1539033328.770:5): proctitle="(systemd)"
_______________________________________________ automotive-discussions mailing list automotive-discussions@xxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/automotive-discussions
