Fixing multiple typing errors across the board. Combined with adding
correct formatting for various configuration parameters in
redhat/autofs.conf.default.in and samples/autofs.conf.default.in. For
example force_standard_program_map_env.
Signed-off-by: Andreas Polnas <nurgrak@xxxxxxxxx>
---
diff --git a/README.active-restart b/README.active-restart
index 95e9862..0f98172 100644
--- a/README.active-restart
+++ b/README.active-restart
@@ -6,7 +6,7 @@ The initial release of autofs version 5 used the
"umount -l" (lazy
umount) to clear stale mounts at startup so that new mounts could
be made with a clean slate. This proved to be a bad choice because
the lazy umount removes the mount from the kernel mount tree. While
-the mount itself persists (invisibe to further VFS lookups) until
+the mount itself persists (invisible to further VFS lookups) until
the mount isn't busy anymore the kernel function d_path(), used to
calculate the path from the mount point to the root, isn't able to
perform its function any more. This leads to things that use d_path(),
@@ -106,7 +106,7 @@ or be set to permissive mode.
Patches for several recent kernel that don't have the implementation
can be found in the patches directory. They have "dev-ioctl" in their
name. Note that, to use these patches, you should be using a kernel
-patched with all the current autofs bug fixes since, apart from porobably
+patched with all the current autofs bug fixes since, apart from probably
not working, the patch probably won't apply either. The bug fix patches
can also be found in the patches directory and they have "v5-update" in
their names.
diff --git a/README.amd-maps b/README.amd-maps
index d933a67..7c518da 100644
--- a/README.amd-maps
+++ b/README.amd-maps
@@ -35,7 +35,7 @@ map name given in the master map entry will override
a "map_name"
option in the amd per-mount section.
If an amd per-mount section is used alone then not giving the "map_type"
-option will alow the use of nsswicth for map selection.
+option will alow the use of nsswitch for map selection.
See below for an example of an amd per-mount configuration entry.
diff --git a/README.autofs-schema b/README.autofs-schema
index c121e1c..05c05f0 100644
--- a/README.autofs-schema
+++ b/README.autofs-schema
@@ -4,7 +4,7 @@ autofs schema
The distribution file samples/autofs.schema is very old and is
incorrect.
-This schema was added to the discribution long ago when it was
+This schema was added to the distribution long ago when it was
not clear what schema to use for Linux autofs information.
The schema was corrected somewhere along the line but the autofs
@@ -12,7 +12,7 @@ distribution copy was never updated. The schema has now been
updated but it is not recommended for use as the schema for autofs
map information.
-The rfc2307 or, preferably the, rfc2307bis schema is the recommened
+The rfc2307 or, preferably the, rfc2307bis schema is the recommended
schema to use.
Ian
diff --git a/daemon/indirect.c b/daemon/indirect.c
index 3225732..e2c7d8d 100644
--- a/daemon/indirect.c
+++ b/daemon/indirect.c
@@ -112,7 +112,7 @@ static int do_mount_autofs_indirect(struct
autofs_point *ap, const char *root)
root);
goto out_err;
}
- /* If we recieve an error, and it's EEXIST or EROFS we know
+ /* If we receive an error, and it's EEXIST or EROFS we know
the directory was not created. */
ap->flags &= ~MOUNT_FLAG_DIR_CREATED;
} else {
diff --git a/daemon/lookup.c b/daemon/lookup.c
index 60a48f3..8489d26 100644
--- a/daemon/lookup.c
+++ b/daemon/lookup.c
@@ -765,7 +765,7 @@ int lookup_ghost(struct autofs_point *ap, const char *root)
goto next;
/* This will also take care of amd "/defaults" entry as
- * amd map keys are not allowd to start with "/"
+ * amd map keys are not allowed to start with "/"
*/
if (*me->key == '/') {
if (map->flags & MAP_FLAG_FORMAT_AMD)
diff --git a/daemon/state.c b/daemon/state.c
index 95d87fc..86a3e50 100644
--- a/daemon/state.c
+++ b/daemon/state.c
@@ -359,7 +359,7 @@ static void do_readmap_mount(struct autofs_point *ap,
* TODO: how do we recognise these orphaned map instances. We
* can't just delete these instances when the cache becomes
* empty because that is a valid state for a master map entry.
- * This is becuase of the requirement to continue running with
+ * This is because of the requirement to continue running with
* an empty cache awaiting a map re-load.
*/
valid = lookup_source_valid_mapent(ap, me->key, LKP_DISTINCT);
diff --git a/include/lookup_ldap.h b/include/lookup_ldap.h
index 3a7aba7..861f6d7 100644
--- a/include/lookup_ldap.h
+++ b/include/lookup_ldap.h
@@ -65,7 +65,7 @@ struct lookup_context {
* uri is the list of servers to attempt connection to and is
* used only if server, above, is NULL. The head of the list
* is the server which we are currently connected to.
- * cur_host tracks chnages to connected server, triggering
+ * cur_host tracks changes to connected server, triggering
* a scan of basedns when it changes.
* sdns is the list of basdns to check, done in the order
* given in configuration.
diff --git a/man/auto.master.5.in b/man/auto.master.5.in
index 6e510a5..6e43a64 100644
--- a/man/auto.master.5.in
+++ b/man/auto.master.5.in
@@ -102,7 +102,7 @@ The map is a regular text file.
.B program
The map is an executable program, which is passed a key on the command
line and returns an entry (everything besides the key) on stdout if successful.
-Optinally, the keyword exec may be used as a synonym for program to avoid
+Optionally, the keyword exec may be used as a synonym for program to avoid
confusion with amd formated maps mount type program.
.TP
.B yp
diff --git a/man/autofs.5 b/man/autofs.5
index d32e772..63c96ac 100644
--- a/man/autofs.5
+++ b/man/autofs.5
@@ -241,7 +241,7 @@ Multiple hosts, some with same path, some with another
Multiple replicated hosts, different (potentially) paths:
<path> host1:/path/pathA host2:/path/pathB
-Mutliple weighted, replicated hosts same path:
+Multiple weighted, replicated hosts same path:
<path> host1(5),host2(6),host3(1):/path/path
Multiple weighted, replicated hosts different (potentially) paths:
diff --git a/man/autofs_ldap_auth.conf.5.in b/man/autofs_ldap_auth.conf.5.in
index 2357566..7b01c68 100644
--- a/man/autofs_ldap_auth.conf.5.in
+++ b/man/autofs_ldap_auth.conf.5.in
@@ -55,7 +55,7 @@ This option tells whether an authenticated
connection to the ldap server is
required in order to perform ldap queries. If the flag is set to yes, only
sasl authenticated connections will be allowed. If it is set to no then
authentication is not needed for ldap server connections. If it is set to
-autodetect then the ldap server will be queried to establish a suitable sasl
+autodetect then the ldap server will be queried to establish a suitable SASL
authentication mechanism. If no suitable mechanism can be found, connections
to the ldap server are made without authentication. Finally, if it is set to
simple, then simple authentication will be used instead of SASL.
diff --git a/modules/lookup_program.c b/modules/lookup_program.c
index fcb1af7..241602e 100644
--- a/modules/lookup_program.c
+++ b/modules/lookup_program.c
@@ -532,7 +532,7 @@ static int match_key(struct autofs_point *ap,
/*
* Now strip successive directory components and try a
* match against map entries ending with a wildcard and
- * finally try the wilcard entry itself.
+ * finally try the wildcard entry itself.
*/
while ((prefix = strrchr(lkp_key, '/'))) {
char *match;
diff --git a/redhat/autofs.conf.default.in b/redhat/autofs.conf.default.in
index 09bb5dd..c413a02 100644
--- a/redhat/autofs.conf.default.in
+++ b/redhat/autofs.conf.default.in
@@ -79,7 +79,7 @@ mount_nfs_default_protocol = 4
# in a language that can load components from,
# for example, a user home directory.
#
-# force_standard_program_map_env = no
+#force_standard_program_map_env = no
#
# use_mount_request_log_id - Set whether to use a mount request log
# id so that log entries for specific mount
@@ -186,7 +186,7 @@ mount_nfs_default_protocol = 4
# use_ignore_mount_option - This option is used to enable the use of autofs
# pseudo option "disable". This option is used as a
# hint to user space that the mount entry should be
-# ommitted from mount table listings. The default is
+# omitted from mount table listings. The default is
# "no" to avoid unexpected changes in behaviour and
# so is an opt-in setting.
#
@@ -333,7 +333,7 @@ mount_nfs_default_protocol = 4
# machines without having to modify centrally managed maps.
# It is empty by default.
#
-# search_path - colon seperated paths to search for maps that
+# search_path - colon separated paths to search for maps that
# are not specified as a full path.
#
# dismount_interval - is equivalent to the autofs timeout option. It
@@ -377,7 +377,7 @@ mount_nfs_default_protocol = 4
# ldap_hostports - has no default value set. It must be set to
# the URI of the LDAP server to be used for lookups when
# ldap is used a map source. It may contain a comma or
-# space seperated list of LDAP URIs.
+# space separated list of LDAP URIs.
#
# hesiod_base - the base name used for hesiod map sources.
#
diff --git a/redhat/autofs.sysconfig b/redhat/autofs.sysconfig
index 0171696..8e3dcbf 100644
--- a/redhat/autofs.sysconfig
+++ b/redhat/autofs.sysconfig
@@ -1,7 +1,7 @@
#
# Init system options
#
-# If the kernel supports using the autofs miscellanous device
+# If the kernel supports using the autofs miscellaneous device
# and you wish to use it you must set this configuration option
# to "yes" otherwise it will not be used.
#
diff --git a/samples/autofs.conf.default.in b/samples/autofs.conf.default.in
index 4a18f6f..bae885c 100644
--- a/samples/autofs.conf.default.in
+++ b/samples/autofs.conf.default.in
@@ -78,7 +78,7 @@ browse_mode = no
# in a language that can load components from,
# for example, a user home directory.
#
-# force_standard_program_map_env = no
+#force_standard_program_map_env = no
#
# use_mount_request_log_id - Set whether to use a mount request log
# id so that log entries for specific mount
@@ -185,7 +185,7 @@ browse_mode = no
# use_ignore_mount_option - This option is used to enable the use of autofs
# pseudo option "disable". This option is used as a
# hint to user space that the mount entry should be
-# ommitted from mount table listings. The default is
+# omitted from mount table listings. The default is
# "no" to avoid unexpected changes in behaviour and
# so is an opt-in setting.
#
@@ -332,7 +332,7 @@ browse_mode = no
# machines without having to modify centrally managed maps.
# It is empty by default.
#
-# search_path - colon seperated paths to search for maps that
+# search_path - colon separated paths to search for maps that
# are not specified as a full path.
#
# dismount_interval - is equivalent to the autofs timeout option. It
@@ -376,7 +376,7 @@ browse_mode = no
# ldap_hostports - has no default value set. It must be set to
# the URI of the LDAP server to be used for lookups when
# ldap is used a map source. It may contain a comma or
-# space seperated list of LDAP URIs.
+# space separated list of LDAP URIs.
#
# hesiod_base - the base name used for hesiod map sources.
#
@@ -408,10 +408,10 @@ dismount_interval = 300
# appears to work reasonably well most of the time without the
# update).
#
-# autofs_use_lofs = yes
+#autofs_use_lofs = yes
#
# Several configuration options can be set per mount point.
-# In particulr map_type, map_name, map_defaults, search_path,
+# In particular map_type, map_name, map_defaults, search_path,
# browsable_dirs, dismount_interval and selectors_in_defaults
# (not all of which are currently implemented, see above).
#
diff --git a/samples/rc.autofs.in b/samples/rc.autofs.in
index 487669f..7601717 100644
--- a/samples/rc.autofs.in
+++ b/samples/rc.autofs.in
@@ -30,7 +30,7 @@ PATH=/sbin:/usr/sbin:/bin:/usr/bin
export PATH
#
-# load customized configuation settings
+# load customized configuration settings
#
if [ -r $confdir/autofs ]; then
. $confdir/autofs
