Re: ath6kl: Remove old 802.11a-only channels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rostyslav Khudolii <rkhudolii@xxxxxxxxxxx> wrote:
> Channels 34/38/42/46 can only be used for compatibility with old devices sold
> in Japan. Modern products, such as AR6003/AR6004 don't support these channels.
> Keeping them in the upstream is error prone and requires full network stack
> support.  A custom patch should be used in case such compatibility is required.
> 
> Without this one, a user is able to start an AP using wpa_supplicant, for
> example, on one of these channels (34/38/42/46), without getting any
> warning/error from the cfg80211 or ath6kl - which is correct (since these
> channels match regdom rules). However, the AR6003 and its firmware (we're using
> v3.4.0.225) will fail and return "WMI_CMDERROR_EVENTID" with "INVALID_PARAM"
> error code.
> 
> Signed-off-by: Rostyslav Khudolii <rkhudolii@xxxxxxxxxxx>
> Cc: Attila Sukosd <attila@xxxxxxxxxxx>

Patch applied to ath-next branch of ath.git, thanks.

b51040fc375c ath6kl: Remove old 802.11a-only channels

-- 
https://patchwork.kernel.org/patch/9615199/

Documentation about submitting wireless patches and checking status
from patchwork:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


_______________________________________________
ath6kl mailing list
ath6kl@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/ath6kl



[Index of Archives]     [Linux Kernel]     [Linux Wireless]     [Linux Bluetooth]     [Linux WPAN]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]

  Powered by Linux