[PATCH 1/1] ath6kl: Fix multiple clients associating in AP mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When one client is associated and connected to an ar6003 hw version
2.0 with firmware 3.1.1.149, and another client tries to connect, the
first client's MAC address is lost in the station list because the
"aid" is always "1".  The structure "wmi_connect_event" has the "aid"
as the second byte in the message, but it should be the first byte.

This patch has been tested with linux-3.10.40, and should apply
cleanly to linux-4.1-rc1

Signed-off-by: Brent Taylor <motobud@xxxxxxxxx>

--- a/drivers/net/wireless/ath/ath6kl/wmi.h     2015-05-05
18:30:14.767029624 -0500
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h     2015-05-05
18:30:21.359031473 -0500
@@ -1527,8 +1527,8 @@ struct wmi_connect_event {
                        __le32 nw_type;
                } sta;
                struct {
-                       u8 phymode;
                        u8 aid;
+                       u8 phymode;
                        u8 mac_addr[ETH_ALEN];
                        u8 auth;
                        u8 keymgmt;

_______________________________________________
ath6kl mailing list
ath6kl@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/ath6kl




[Index of Archives]     [Linux Kernel]     [Linux Wireless]     [Linux Bluetooth]     [Linux WPAN]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]

  Powered by Linux