Oh also the fw output from dmesg | grep ath6k ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3 On Thu, Apr 9, 2015 at 3:51 PM, Jesse Libertine <jesselibertine@xxxxxxxxx> wrote: > I am trying to get a ath6kl SDIO adapter to work as a 5GHz AP (and > concurrent client if possible) and running into issues with my Yocto / > FreeScale iMX6 3.10.53 build. > > 2.4GHz wpa_supplicant client or hostapd does seem to work. > > First I tried to add a station as I did with another adapter for > concurrent client and station mode: > iw dev wlan0 interface add wlan1 type station > command failed: Operation not supported (-95) > or with different fw > command failed: Operation not permitted (-1) > > So then forget about concurrency I tried just starting a 5GHz AP on wlan0 > hostapd.conf file: > interface=wlan0 > driver=nl80211 > ssid=test > hw_mode=a > channel=149 > wpa=1 > wpa_passphrase=1234567890 > > hostapd /etc/hostapd.conf > Configuration file: /etc/hostapd.conf > nl80211: Failed to set interface wlan0 into AP mode > nl80211 driver initialization failed. > ELOOP: remaining socket: sock=4 eloop_data=0x83a70 user_data=0x83ff8 > handler=0x28b4d > ELOOP: remaining socket: sock=6 eloop_data=0x858f8 user_data=(nil) > handler=0x2e72d > > > Here is the ath6kl_sdio version from modinfo from my Yocto / Freescale build: > filename: > /lib/modules/3.10.53-1.1.0_ga+g496fbe0/kernel/drivers/net/wireless/ath/ath6kl/ath6kl_sdio.ko > firmware: ath6k/AR6004/hw1.3/bdata.bin > firmware: ath6k/AR6004/hw1.3/bdata.bin > firmware: ath6k/AR6004/hw1.3/fw.ram.bin > firmware: ath6k/AR6004/hw1.2/bdata.bin > firmware: ath6k/AR6004/hw1.2/bdata.bin > firmware: ath6k/AR6004/hw1.2/fw.ram.bin > firmware: ath6k/AR6004/hw1.1/bdata.DB132.bin > firmware: ath6k/AR6004/hw1.1/bdata.bin > firmware: ath6k/AR6004/hw1.1/fw.ram.bin > firmware: ath6k/AR6004/hw1.0/bdata.DB132.bin > firmware: ath6k/AR6004/hw1.0/bdata.bin > firmware: ath6k/AR6004/hw1.0/fw.ram.bin > firmware: ath6k/AR6003/hw2.1.1/bdata.SD31.bin > firmware: ath6k/AR6003/hw2.1.1/bdata.bin > firmware: ath6k/AR6003/hw2.1.1/data.patch.bin > firmware: ath6k/AR6003/hw2.1.1/athwlan.bin > firmware: ath6k/AR6003/hw2.1.1/otp.bin > firmware: ath6k/AR6003/hw2.0/bdata.SD31.bin > firmware: ath6k/AR6003/hw2.0/bdata.bin > firmware: ath6k/AR6003/hw2.0/data.patch.bin > firmware: ath6k/AR6003/hw2.0/athwlan.bin.z77 > firmware: ath6k/AR6003/hw2.0/otp.bin.z77 > license: Dual BSD/GPL > description: Driver support for Atheros AR600x SDIO devices > author: Atheros Communications, Inc. > srcversion: 7AD6100F1A897E5DCD0907C > alias: sdio:c*v0271d0401* > alias: sdio:c*v0271d0400* > alias: sdio:c*v0271d0301* > alias: sdio:c*v0271d0300* > depends: ath6kl_core > intree: Y > vermagic: 3.10.53-1.1.0_ga+g496fbe0 SMP preempt mod_unload > modversions ARMv7 p2v8 > > > And here is my iw list output: > > # iw list > Wiphy phy0 > max # scan SSIDs: 16 > max scan IEs length: 1000 bytes > Coverage class: 0 (up to 0m) > Device supports roaming. > Supported Ciphers: > * WEP40 (00-0f-ac:1) > * WEP104 (00-0f-ac:5) > * TKIP (00-0f-ac:2) > * CCMP (00-0f-ac:4) > * 00-40-96:255 > * WPI-SMS4 (00-14-72:1) > Available Antennas: TX 0 RX 0 > Supported interface modes: > * IBSS > * managed > * AP > Band 1: > Capabilities: 0x20 > HT20 > Static SM Power Save > RX HT20 SGI > No RX STBC > Max AMSDU length: 3839 bytes > No DSSS/CCK HT40 > Maximum RX AMPDU length 8191 bytes (exponent: 0x000) > Minimum RX AMPDU time spacing: No restriction (0x00) > HT RX MCS rate indexes supported: 0-7 > HT TX MCS rate indexes are undefined > Bitrates (non-HT): > * 1.0 Mbps > * 2.0 Mbps > * 5.5 Mbps > * 11.0 Mbps > * 6.0 Mbps > * 9.0 Mbps > * 12.0 Mbps > * 18.0 Mbps > * 24.0 Mbps > * 36.0 Mbps > * 48.0 Mbps > * 54.0 Mbps > Frequencies: > * 2412 MHz [1] (20.0 dBm) > * 2417 MHz [2] (20.0 dBm) > * 2422 MHz [3] (20.0 dBm) > * 2427 MHz [4] (20.0 dBm) > * 2432 MHz [5] (20.0 dBm) > * 2437 MHz [6] (20.0 dBm) > * 2442 MHz [7] (20.0 dBm) > * 2447 MHz [8] (20.0 dBm) > * 2452 MHz [9] (20.0 dBm) > * 2457 MHz [10] (20.0 dBm) > * 2462 MHz [11] (20.0 dBm) > * 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS) > * 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS) > * 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS) > Band 2: > Capabilities: 0x62 > HT20/HT40 > Static SM Power Save > RX HT20 SGI > RX HT40 SGI > No RX STBC > Max AMSDU length: 3839 bytes > No DSSS/CCK HT40 > Maximum RX AMPDU length 8191 bytes (exponent: 0x000) > Minimum RX AMPDU time spacing: No restriction (0x00) > HT RX MCS rate indexes supported: 0-7 > HT TX MCS rate indexes are undefined > Bitrates (non-HT): > * 6.0 Mbps > * 9.0 Mbps > * 12.0 Mbps > * 18.0 Mbps > * 24.0 Mbps > * 36.0 Mbps > * 48.0 Mbps > * 54.0 Mbps > Frequencies: > * 5170 MHz [34] (disabled) > * 5180 MHz [36] (20.0 dBm) (passive scanning, no IBSS) > * 5190 MHz [38] (20.0 dBm) (passive scanning, no IBSS) > * 5200 MHz [40] (20.0 dBm) (passive scanning, no IBSS) > * 5210 MHz [42] (20.0 dBm) (passive scanning, no IBSS) > * 5220 MHz [44] (20.0 dBm) (passive scanning, no IBSS) > * 5230 MHz [46] (20.0 dBm) (passive scanning, no IBSS) > * 5240 MHz [48] (20.0 dBm) (passive scanning, no IBSS) > * 5260 MHz [52] (disabled) > * 5280 MHz [56] (disabled) > * 5300 MHz [60] (disabled) > * 5320 MHz [64] (disabled) > * 5500 MHz [100] (disabled) > * 5520 MHz [104] (disabled) > * 5540 MHz [108] (disabled) > * 5560 MHz [112] (disabled) > * 5580 MHz [116] (disabled) > * 5600 MHz [120] (disabled) > * 5620 MHz [124] (disabled) > * 5640 MHz [128] (disabled) > * 5660 MHz [132] (disabled) > * 5680 MHz [136] (disabled) > * 5700 MHz [140] (disabled) > * 5745 MHz [149] (20.0 dBm) (passive scanning, no IBSS) > * 5765 MHz [153] (20.0 dBm) (passive scanning, no IBSS) > * 5785 MHz [157] (20.0 dBm) (passive scanning, no IBSS) > * 5805 MHz [161] (20.0 dBm) (passive scanning, no IBSS) > * 5825 MHz [165] (20.0 dBm) (passive scanning, no IBSS) > * 5920 MHz [184] (disabled) > * 5940 MHz [188] (disabled) > * 5960 MHz [192] (disabled) > * 5980 MHz [196] (disabled) > * 6000 MHz [200] (disabled) > * 6020 MHz [204] (disabled) > * 6040 MHz [208] (disabled) > * 6060 MHz [212] (disabled) > * 6080 MHz [216] (disabled) > Supported commands: > * new_interface > * set_interface > * new_key > * start_ap > * join_ibss > * set_pmksa > * del_pmksa > * flush_pmksa > * remain_on_channel > * set_tx_bitrate_mask > * frame > * set_channel > * connect > * disconnect > Supported TX frame types: > * managed: 0x50 0xd0 > * AP: 0x50 0xd0 > * P2P-client: 0x50 0xd0 > * P2P-GO: 0x50 0xd0 > Supported RX frame types: > * managed: 0x40 0xd0 > * AP: 0x40 0xd0 > * P2P-client: 0x40 0xd0 > * P2P-GO: 0x40 0xd0 > WoWLAN support: > * wake up on disconnect > * wake up on magic packet > * wake up on pattern match, up to 4 patterns of 1-64 bytes, > maximum packet offset 0 bytes > * can do GTK rekeying > * wake up on GTK rekey failure > * wake up on EAP identity request > * wake up on 4-way handshake > software interface modes (can always be added): > interface combinations are not supported > Device supports scan flush. > > Do I need to patch in a newer driver to my 3.10 build? > > Any help is greatly appreciated! _______________________________________________ ath6kl mailing list ath6kl@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/ath6kl
