Hello Luca, sorry for the delay, but I have been busy lately and did not find the time to create the log you asked for. Attached you´ll find the startup output until it reaches the kernel panic. I really hope you can find the cause of this issue :-) kind regards Andreas Luca Berra schrieb: > On Tue, Apr 07, 2009 at 09:22:30AM +0200, Andreas Oster wrote: >> Hello all, >> >> I recently have run into a problem with a server of ours (HP DL320) >> with a raid 1 setup. The system is Mandriva Cooker and currently runs >> kernel kernel.h-2.6.27-desktop-0.rc5.2.1mnb. Now I would like to >> update the kernel to a newer 2.6.28 version, but if I do so the >> system does not boot because the root partition can not be found anymore. >> >> I read somewhere that sometimes the IDs (lsi_xxxxxxxxx) change, when >> changing the kernel. > > this sounds very weird to me, i'd almost bet it is not the real reason. > > mandriva uses redhat's initrd, which i personally despise. > > but let's not be conecerned with my feelings, it suffices saying that it > will store the output of 'dmsetup table' for your running system, and > feed it to 'dmsetup create' > > the table will contain the major/minor number of the components of the > array, if those change you are hosed. > > do you have any other devices connected to your box that could alter the > order of "scsi" devices seen by the system? > > can you please boot without the splash screen and copy every line > between the 'Red-Hat nash version xxx starting' and the panic message? > A serial console would be great, but a digital camera or a sheet of > paper and a pencil would do. > > L. > > >
GRUB Loading stage1.5. GRUB loading, please wait... Initializing gfx code... kernel (hd0,0)/vmlinuz BOOT_IMAGE=failsafe root=UUID=b781bcfb-1ba7-4673-bf70-0 1bf22423da2 failsafe [Linux-bzImage, setup=0x3000, size=0x2292b0] initrd (hd0,0)/initrd.img [Linux-initrd @ 0x37c47000, 0x3a87de bytes] Probing EDD (edd=off to disable)... ok BIOS EBDA/lowmem at: 0009e800/0009e800 Initializing cgroup subsys cpuset Linux version 2.6.28.4-server-1mnb (herton@xxxxxxxxxxxxxxxx) (gcc version 4.3.2 (GCC) ) #1 SMP Mon Feb 9 09:05:19 EST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fffa000 (usable) BIOS-e820: 000000007fffa000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x7fffa max_arch_pfn = 0x1000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 RAMDISK: 37c47000 - 37fef7de Allocated new RAMDISK: 0066b000 - 00a137de Move RAMDISK from 0000000037c47000 - 0000000037fef7dd to 0066b000 - 00a137dd ACPI: RSDP 000F4F70, 0014 (r0 COMPAQ) ACPI: RSDT 7FFFA000, 0030 (r1 COMPAQ D13 2 Ò 162E) ACPI: FACP 7FFFA040, 0074 (r1 COMPAQ D13 2 Ò 162E) ACPI: DSDT 7FFFA240, 1D99 (r1 COMPAQ DSDT 1 MSFT 100000B) ACPI: FACS 7FFFA0C0, 0040 ACPI: APIC 7FFFA100, 0094 (r1 COMPAQ 00000083 2 Ò 162E) ACPI: SPCR 7FFFA1C0, 0050 (r1 COMPAQ SPCRRBSU 1 Ò 162E) 1157MB HIGHMEM available. 889MB LOWMEM available. mapped low ram: 0 - 379fe000 low ram: 00000000 - 379fe000 bootmap 00009000 - 0000ff40 (9 early reservations) ==> bootmem [0000000000 - 00379fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000662ba0] TEXT DATA BSS ==> [0000100000 - 0000662ba0] #4 [0000663000 - 000066b000] INIT_PG_TABLE ==> [0000663000 - 000066b000] #5 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [000066b000 - 0000a137de] NEW RAMDISK ==> [000066b000 - 0000a137de] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00f4fd0] 000f4fd0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000379fe HighMem 0x000379fe -> 0x0007fffa Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x0007fffa ACPI: PM-Timer IO Port: 0x920 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 8 CPUs, 7 hotplug CPUs PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) PERCPU: Allocating 45056 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520088 Kernel command line: BOOT_IMAGE=failsafe root=UUID=b781bcfb-1ba7-4673-bf70-01bf22423da2 failsafe console=ttyS0,9600 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2265.702 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2068908k/2097128k available (2766k kernel code, 26900k reserved, 1542k data, 436k init, 1185776k highmem) virtual kernel memory layout: fixmap : 0xffe18000 - 0xfffff000 (1948 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) .init : 0xc053c000 - 0xc05a9000 ( 436 kB) .data : 0xc03b3961 - 0xc053525c (1542 kB) .text : 0xc0100000 - 0xc03b3961 (2766 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 4531.40 BogoMIPS (lpj=22657020) Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Early unpacking initramfs... done Freeing initrd memory: 3745k freed ACPI: Core revision 20080926 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 07 Brought up 1 CPUs Total of 1 processors activated (4531.40 BogoMIPS). net_namespace: 776 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=0 PCI: Using configuration type 1 for base access ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:05.0: PME# supported from D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D3hot D3cold pci 0000:00:06.0: PME# disabled ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 7 *10 11 15) ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN17] (IRQs 4 5 7 10 *11 15) ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 11 15) *3 ACPI: PCI Interrupt Link [IN19] (IRQs 4 *5 7 10 11 15) ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 *7 10 11 15) ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15) *0, disabled. ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0, disabled. PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x900-0x903 has been reserved system 00:01: ioport range 0x904-0x904 has been reserved system 00:01: ioport range 0x910-0x911 has been reserved system 00:01: ioport range 0x920-0x923 has been reserved system 00:01: ioport range 0x930-0x937 has been reserved system 00:01: ioport range 0x940-0x947 has been reserved system 00:01: ioport range 0x950-0x957 has been reserved system 00:01: ioport range 0xc06-0xc08 has been reserved system 00:01: ioport range 0xc14-0xc14 has been reserved system 00:01: ioport range 0xc49-0xc4a has been reserved system 00:01: ioport range 0xc50-0xc52 has been reserved system 00:01: ioport range 0xc6c-0xc6f has been reserved system 00:01: ioport range 0x230-0x233 has been reserved system 00:01: ioport range 0x260-0x267 has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x713 has been reserved system 00:01: ioport range 0x800-0x81f has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xcf9-0xcf9 could not be reserved bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 platform rtc_cmos: registered platform RTC device (no PNP device found) apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1241705760.331:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Hook version: 2.6.28-rc7 2008/12/02 msgmni has been set to 1733 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: MSI quirk detected; MSI disabled pci 0000:00:00.1: MSI quirk detected; MSI disabled isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 436k freed Mounting proc fiinput: AT Translated Set 2 keyboard as /class/input/input0 lesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Starting splash. Setting up hotplug. elantech.c: unexpected magic knock result 0x00, 0x03, 0x40. Creating block device nodes. Loading ext3 modulSCSI subsystem initialized e Loading crc-tDriver 'sd' needs updating - please use bus_type methods 10dif module Loading scsi_mod mpata_cmd64x 0000:00:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 odule Loading sscsi0 : pata_cmd64x d_mod module Loscsi1 : pata_cmd64x ading libata modata1: PATA max UDMA/100 cmd 0x2010 ctl 0x2018 bmdma 0x2030 irq 17 ule Loading patata2: PATA max UDMA/100 cmd 0x2020 ctl 0x2028 bmdma 0x2038 irq 17 a_cmd64x module input: PS/2 Generic Mouse as /class/input/input1 ata1.00: ATA-7: MAXTOR STM380215A, 3.AAD, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.01: ATA-7: MAXTOR STM380215A, 3.AAD, max UDMA/100 ata1.01: 156301488 sectors, multi 16: LBA48 ata1.00: limited to UDMA/33 due to 40-wire cable ata1.01: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 ata1.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380215 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 0:0:1:0: Direct-Access ATA MAXTOR STM380215 3.AA PQ: 0 ANSI: 5 sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 < sdb5 sdb6 > sd 0:0:1:0: [sdb] Attached SCSI disk Loading ide-core module Uniform Multi-Platform E-IDE driver Loading ide-diskide-gd driver 1.18 module Loading cmd64x mscsi2 : pata_serverworks odule Loading pscsi3 : pata_serverworks ata_serverworks ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14 module ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15 ata3.00: ATAPI: DV-28E-V, C.AB, max UDMA/33 ata3.00: configured for UDMA/33 scsi 2:0:0:0: CD-ROM TEAC DV-28E-V C.AB PQ: 0 ANSI: 5 Loading usb_storage module usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Loading dm-mod mdevice-mapper: uevent: version 1.0.3 odule device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx Loading dm-mirror module Loading dm-zero module Loading dm-snapshot module Waiting for driver initialization. Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. setuproot: moving /dev failed: No such file or directory setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. switchroot: /dev does not exist in new root Booting has failed. Kernel panic - not syncing: Attempted to kill init! Dumping ftrace buffer: (ftrace buffer empty)
_______________________________________________ Ataraid-list mailing list Ataraid-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/ataraid-list