Hi,
finally I've setup my dmraid system on A8r32-MVP and SiliconImage
controller because of unsupported ULI tech.
All gone well, but looking at /var/log/messages there are these line for
each sturtup:
Dec 22 22:05:11 NeXT Buffer I/O error on device sda4, logical block
160633728
Dec 22 22:05:11 NeXT attempt to access beyond end of device
Dec 22 22:05:11 NeXT sda: rw=0, want=290438930, limit=145226112
Dec 22 22:05:11 NeXT Buffer I/O error on device sda4, logical block
160633729
Dec 22 22:05:11 NeXT attempt to access beyond end of device
Dec 22 22:05:11 NeXT sda: rw=0, want=290438931, limit=145226112
Dec 22 22:05:11 NeXT attempt to access beyond end of device
Dec 22 22:05:11 NeXT sda: rw=0, want=290438932, limit=145226112
Dec 22 22:05:11 NeXT attempt to access beyond end of device
These are the line releted to the disks in raid:
Dec 22 22:05:11 NeXT ata1: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Dec 22 22:05:11 NeXT ata1.00: ATA-6: WDC WD740GD-00FLA0, 21.08U21,
max UDMA/133
Dec 22 22:05:11 NeXT ata1.00: 145226112 sectors, multi 16: LBA48
Dec 22 22:05:11 NeXT ata1.00: applying bridge limits
Dec 22 22:05:11 NeXT ata1.00: configured for UDMA/100
Dec 22 22:05:11 NeXT ata2: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Dec 22 22:05:11 NeXT ata2.00: ATA-6: WDC WD740GD-00FLA1, 27.08D27,
max UDMA/133
Dec 22 22:05:11 NeXT ata2.00: 145226112 sectors, multi 16: LBA48
Dec 22 22:05:11 NeXT ata2.00: configured for UDMA/100
Dec 22 22:05:11 NeXT scsi 0:0:0:0: Direct-Access ATA WDC
WD740GD-00FL 21.0 PQ: 0 ANSI: 5
Dec 22 22:05:11 NeXT sd 0:0:0:0: [sda] 145226112 512-byte hardware
sectors (74356 MB)
Dec 22 22:05:11 NeXT sd 0:0:0:0: [sda] Write Protect is off
Dec 22 22:05:11 NeXT sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 22 22:05:11 NeXT sd 0:0:0:0: [sda] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Dec 22 22:05:11 NeXT sd 0:0:0:0: [sda] 145226112 512-byte hardware
sectors (74356 MB)
Dec 22 22:05:11 NeXT sd 0:0:0:0: [sda] Write Protect is off
Dec 22 22:05:11 NeXT sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 22 22:05:11 NeXT sd 0:0:0:0: [sda] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Dec 22 22:05:11 NeXT sda: sda1 sda2 sda3 sda4
Dec 22 22:05:11 NeXT sda: p4 exceeds device capacity
Dec 22 22:05:11 NeXT sd 0:0:0:0: [sda] Attached SCSI disk
Dec 22 22:05:11 NeXT scsi 1:0:0:0: Direct-Access ATA WDC
WD740GD-00FL 27.0 PQ: 0 ANSI: 5
Dec 22 22:05:11 NeXT sd 1:0:0:0: [sdb] 145226112 512-byte hardware
sectors (74356 MB)
Dec 22 22:05:11 NeXT sd 1:0:0:0: [sdb] Write Protect is off
Dec 22 22:05:11 NeXT sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Dec 22 22:05:11 NeXT sd 1:0:0:0: [sdb] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Dec 22 22:05:11 NeXT sd 1:0:0:0: [sdb] 145226112 512-byte hardware
sectors (74356 MB)
Dec 22 22:05:11 NeXT sd 1:0:0:0: [sdb] Write Protect is off
Dec 22 22:05:11 NeXT sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Dec 22 22:05:11 NeXT sd 1:0:0:0: [sdb] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Dec 22 22:05:11 NeXT sdb: unknown partition table
Dec 22 22:05:11 NeXT sd 1:0:0:0: [sdb] Attached SCSI disk
Pleace note that sda has its-own partitions instead sdb has unknown
partition table.
Do you know where is the fault?
_______________________________________________
Ataraid-list mailing list
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list
