No I didn't, isn't rebuild supposed to continue after starting linux ?
Phillip Susi a écrit :
Adam Cécile wrote:
Hello,
I set up a RAID1 array on a sunfire x2200 (nvidia raid controller),
running Debian Etch, dmraid version 1.0.0.rc13-2, kernel 2.6.18.
I replaced one drive (testing purpose) and asked the controller to
rebuild the array with this drive (through the nvidia raid bios).
However, some days later, the BIOS controller still say "status:
rebuild".
Did you let the bios finish resynchronizing before rebooting? This
should have taken a good while on the order of an hour.
_______________________________________________
Ataraid-list mailing list
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list
--
Adam CECILE Linbox / Free&ALter Soft
152 rue de Grigy tél: +33 3 87 50 87 95
Technopôle Metz 2000 fax: +33 3 87 75 19 26
57070 METZ - France http://www.linbox.com
_______________________________________________
Ataraid-list mailing list
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list
