md-raid is the older pure software raid kernel driver. dm-raid is a
utility that scans for the configuration tables written to disks by
hardware fakeraid controlers, and configures the device-mapper kernel
driver to access the raid volumes. device-mapper is the newer kernel
driver that LVM uses to support raid functions. Most of the modern
cheap ide or sata "hardware raid" cards are not really hardware raid.
They have software raid support in their proprietary drivers and the
system bios.
From a practical standpoint, the advantages of dm-raid with a hardware
fakeraid card over traditional md-raid are:
1) Can boot directly from a raid5 or raid0
2) Can failover and still boot from a raid5 or raid1 with a damaged boot
area
3) Can dual boot with windows
dm-raid however, is not very well supported yet compared to md-raid.
Anthony Wright wrote:
I apologise for being thick, but I trying to understand the difference
between dm-raid and md-raid. Do these projects overlap, or do they
address separate problems in the same area?
Some of the information I've looked at suggests they implement similar
RAID functionality in different ways, while others seem to suggest that
dm-raid supports RAID functionality provided by device manufactures
while md-raid implements the RAID functionality internally. I'm getting
really confused, and can't find anything that explains the difference.
From what I've read about dm-raid the concept of maintaining a log of
changes and being able to catch up the changes rather than having to do
a full disk rebuild sounds very attractive, and I've also seen it
mentioned in relation to Clustered LVM which again is attractive.
The architecture I'm trying to build looks something like (improvements
gladly accepted):
Clustered File System (GFS, OCFS2)
|
Clustered LVM
|
Clustered RAID (dm-raid ?)
|
Networked Disk (GNBD, NBD, AoE)
The aim being to build a fault tolerant, clustered file system where I
can add a machine to increase file system performance, I can add disks
to increase storage space, and the whole system can continue to operate
if a disk or machine fails (assuming you've correctly configured your
RAID).
Thanks,
Tony Wright
_______________________________________________
Ataraid-list mailing list
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list
