Also, I've been messing about with Linux Software RAID, but LILO won't
boot my system (as root is /dev/md0).
I have done this, the trick is:
# Allow booting from raid1.
raid-extra-boot="/dev/sda,/dev/sdb"
# Also..
boot=/dev/md1
root=/dev/md2
Then when you run LILO:
# lilo
Added 2.6.17-2
Added 2.6.17-3
Added 2.6.17-4
Added 2.6.17-5
Added 2.6.17-6 *
The boot record of /dev/md1 has been updated.
The boot record of /dev/sda has been updated.
The boot record of /dev/sdb has been updated.
On Fri, 23 Jun 2006, Rory Vieira wrote:
Hi,
System Info:
Asus A8N-VM CSM
AMD Athlon 64 X2 3800+
2 * Kingston 1Gb PC3200 ECC
3 * Seagate 320Gb SATA-2
Adaptec 2904 PCI + HP SureStore DAT24
Issue:
I would like to install SuSE 10.1 on the NVRAID environment with RAID-5.
However, during setup I get the message that my disks are part of software raid etc.
Question:
How do I go about and install Linux?
Obviously I need a running system to actually use dmraid, so I'm unsure where to go from here.
There's no OS on the system at this point.
Also, I've been messing about with Linux Software RAID, but LILO won't boot my system (as root is /dev/md0).
I'm currently using the BootDVD to boot my system (ouch)...
Hope someone can give me some guidelines to continue :)
Cheers,
Rory
_______________________________________________
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list
_______________________________________________
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list
