On Wed, Jun 07, 2006 at 08:49:17AM -0400, Brian Keener wrote: > On 6/7/06, Heinz Mauelshagen <mauelshagen@xxxxxxxxxx> wrote: > > > >On Wed, Jun 07, 2006 at 07:43:26AM -0400, Brian Keener wrote: > >> dmraid -r > >> /dev/hdb: nvidia, "nvidia_hbjebege", mirror, inconsistent, 488281248 > >> sectors, data@ 0 > >> /dev/hdd: nvidia, "nvidia_hbjebege", mirror, inconsistent, 490234750 > >> sectors, data@ 0 > >> > >> It's an nforce3 250 chipset with two 250 gig IDE drives, one primary > >slave, > >> one secondary slave. > >> > >> I JUST set this raid up last night. > >> > >> Nvidia's bios-based config utility reports the status as good. > >> > >> My suspicion is that it's still initializing the array... > > > >Yes, the OS (i.e. device-mapper) needs to do it. > > > Is this something that should be happening automatically, or do I need to > initiate this somehow? It should happen automatically, unless the BIOS reports the wrong state or dmraid interprets it wrongly. I'ld like to know about either case ;-) Heinz > > Brian K > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/ataraid-list =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Heinz Mauelshagen Red Hat GmbH Consulting Development Engineer Am Sonnenhang 11 Storage Development 56242 Marienrachdorf Germany Mauelshagen@xxxxxxxxxx PHONE +49 171 7803392 FAX +49 2626 924446 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- _______________________________________________ Ataraid-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/ataraid-list
