On 4/12/06, James Olson <big_spender12@xxxxxxxxx> wrote:
> If you boot the FC5 cd and type linux rescue, can you post the output of # dmraid -ay and # fdisk -l /dev/mapper/isw_hgbhgbbcd commands?
The first time I run :
# dmraid -ay :
RAID set "isw_hgbhgbbcd_Volume0" already active
RAID set "isw_hgbhgbbcd_Volume1" already active
The second time , I get
# dmraid -ay :
RAID set "isw_hgbhgbbcd_Volume0" already active
RAID set "isw_hgbhgbbcd_Volume1" already active
RAID set "isw_hgbhgbbcd_Volume01" already active
----------------------------------------------------------------------------------------------------------------------------------
# fdisk -l /dev/mapper/isw_hgbhgbbcd_Volume0
Disk /dev/mapper/isw_hgbhgbbcd_Volume0: 161.0 GB, 161061538816 bytes
255 heads, 63 sectors/track, 19581 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End
Blocks Id System
/dev/mapper/isw_hgbhgbbcd_Volume0p1 * 1 5222
41945683+ 7 HPFS/NTFS
/dev/mapper/isw_hgbhgbbcd_Volume0p2 5223 19928
118125945 f W95 Ext'd (LBA)
--------------------------------------------------------------------------------------------------------------------------------
On 4/12/06, James Olson <big_spender12@xxxxxxxxx> wrote:
> If you boot the FC5 cd and type linux rescue, can you post the output of # dmraid -ay and # fdisk -l /dev/mapper/isw_hgbhgbbcd commands?
The first time I run :
# dmraid -ay :
RAID set "isw_hgbhgbbcd_Volume0" already active
RAID set "isw_hgbhgbbcd_Volume1" already active
The second time , I get
# dmraid -ay :
RAID set "isw_hgbhgbbcd_Volume0" already active
RAID set "isw_hgbhgbbcd_Volume1" already active
RAID set "isw_hgbhgbbcd_Volume01" already active
----------------------------------------------------------------------------------------------------------------------------------
# fdisk -l /dev/mapper/isw_hgbhgbbcd_Volume1
Disk /dev/mapper/isw_hgbhgbbcd_Volume1: 166.7 GB, 166786763776 bytes
255 heads, 63 sectors/track, 20277 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
----------------------------------------------------------------------------------------------------------------------------------
# fdisk -l /dev/mapper/isw_hgbhgbbcd_Volume01
Disk /dev/mapper/isw_hgbhgbbcd_Volume01: 42.9 GB, 42952379904 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End
Blocks Id System
/dev/mapper/isw_hgbhgbbcd_Volume01p1 ? 119529 232583
908105142 74 Unknown
Partition 1 does not end on cylinder boundary.
/dev/mapper/isw_hgbhgbbcd_Volume01p2 ? 119534 224381
842184976 70 DiskSecure Multi-Boot
Partition 2 does not end on cylinder boundary.
/dev/mapper/isw_hgbhgbbcd_Volume01p3 ? 10497 10497
0 72 Unknown
Partition 3 does not end on cylinder boundary.
/dev/mapper/isw_hgbhgbbcd_Volume01p4 160318 160321
24404 0 Empty
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
-------------------------------------------------------------------------------------------------------------------------------------
note I don't intend to use software raid in fc5 anyway for the moment
hicham
_______________________________________________
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list
