Hi Is dmraid rc10 supposed to support this kind of card by now? I have a HP DL320 with the following card and two sata disks setup for raid 1: 00:1f.2 RAID bus controller: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03) which is not working (no RAID disks). dmesg output: ACPI: PCI interrupt for device 0000:00:1f.2 disabled libata version 1.20 loaded. ahci 0000:00:1f.2: version 1.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl RAID mode ahci 0000:00:1f.2: flags: 64bit stag led pmp ata1: SATA max UDMA/133 cmd 0xF886A100 ctl 0x0 bmdma 0x0 irq 201 ata2: SATA max UDMA/133 cmd 0xF886A180 ctl 0x0 bmdma 0x0 irq 201 ata3: SATA max UDMA/133 cmd 0xF886A200 ctl 0x0 bmdma 0x0 irq 201 ata4: SATA max UDMA/133 cmd 0xF886A280 ctl 0x0 bmdma 0x0 irq 201 ata1: dev 0 cfg 49:2f00 82:7869 83:7d09 84:4023 85:7869 86:3c21 87:4023 88:203f ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi4 : ahci ata2: dev 0 cfg 49:2f00 82:7869 83:7d09 84:4023 85:7869 86:3c21 87:4023 88:203f ata2: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48 ata2: dev 0 configured for UDMA/100 scsi5 : ahci ata3: no device found (phy stat 00000000) scsi6 : ahci ata4: no device found (phy stat 00000000) scsi7 : ahci Vendor: ATA Model: Maxtor 6L080M0 Rev: BACE Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda: unknown partition table sd 4:0:0:0: Attached scsi disk sda Vendor: ATA Model: Maxtor 6L080M0 Rev: BACE Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sdb: drive cache: write back sdb: unknown partition table sd 5:0:0:0: Attached scsi disk sdb Thanks for a short info and on how to get this card/raid setup working. @heinz: i'll send you the last 20 sectors of the drives involved by private mail. Cheers Marcel > Hmm, another RAID flavour for isw ;) > Not supported yet though. > > Can you send me the last 20 sectors of each drive in files named > DriveName.dat > (eg. sda.dat), all tar'ed and bzip2`ed in a file > isw-Patrick_Dalais-raid10.tar.bz2, please. > > Maybe it's not to tough to add support. > > Regards, > Heinz -- The LVM Guy -- > > On Thu, Feb 02, 2006 at 01:33:58PM +0200, Patrick Dalais wrote: >>> Hi, >>> >>> I have server with Intel Board SE7221BK1-E >>> >>> It has ICH6R on board according to Intel specs >>> >>> Is RAID10 mode for the ICH6R supported? >>>
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Ataraid-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/ataraid-list
