Luca Berra wrote:
On Tue, Jan 17, 2006 at 02:59:24PM -0800, Michael Kovacs wrote:
Phillip Susi wrote:
Looks like you either blew away your partition table, or
/dev/mapper/pdc_dcbagbdid is not being set up correctly. I'm
guessing when you reinstalled, something went wrong and blew away
the partition table.
Phillip, any suggestions as to how I might get the partion back?
http://www.cgsecurity.org/testdisk.html
Luca, You are an angel sent from God, You just saved my marriage. OK
here is what I did to recover my lost raid-0 ext3 partition.
I used the suggested program "testdisk" to rewrite the lost parttion,
then rebooted the computer. Upon boot-up /dev/dm-3 was created to
reflect the partition on the raid device. I found that out from "dmesg |
tail" which told me of filesystem corruption on that device. I then ran
"fsck /dev/dm-3" and repaired the filesystem. After that I was able to
mount the raid partition with "mount /dev/mapper/pdc_dcbagbdid1 /mnt/array"
Again thank you all who responded to my plea for help and thank you Luca
for saving my day and possibly my life!
Michael Kovacs
_______________________________________________
Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list
