Hi Phillip. On Thu, Sep 22, 2005 at 10:37:04AM -0400, Phillip Susi wrote: > I used the dmraid utility to attempt to detect and configure my SATA > RAID 0. It recognized the volume, but seems to assume it uses a stripe > size of 16 KB rather than using the value in the parameter block on the > disk. I ended up having to correct the stripe size to 64 KB using > dmsetup by hand to get everything working. > > Is this a known bug, No. > and is there anything I can do to help fix it, such > as supplying dumps of the bios parameter block when the raid is built > with different sizes so the location of the stripe size can be found? Yes. 'dmraid -rD' output (*.dat, *.size and *.offset files) tar'ed/bzip2'ed would be helpful. > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/ataraid-list -- Regards, Heinz *** Software bugs are stupid. Nevertheless it needs not so stupid people to solve them *** =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Heinz Mauelshagen Red Hat GmbH Consulting Development Engineer Am Sonnenhang 11 Cluster and Storage Development 56242 Marienrachdorf Germany Mauelshagen@xxxxxxxxxx +49 2626 141200 FAX 924446 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- _______________________________________________ Ataraid-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/ataraid-list
