Re: Debian and dmraid... is it possible to install?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 21 Jul 2005 01:24:49 +0200
"Emiliano Esposito" <skywalk3r@xxxxxxxxxxxxx> wrote:

> Greetings to all!
> 
> First of all, I hope not being OT nor asking something already asked
> (I've searched much for this though...).
> 
> In short: I need to install Debian (via cds or net-install) on an asus
> a7n8x with silicon image 3112 medley RAID, two maxtor 160 gb sata
> disks.
> 
> I have Windows and a Gentoo up and working, but now I need Debian. The
> latest distro (sarge stable) won't recognize the array with kernel
> 2.6.8 nor with 2.4.27. 
> 
> This is what I tried to do:
> 
> - booted gentoo, and copied dmraid and udev (+ libs) onto a floppy
> - booted minimally debian from cd
> - mounted the floppy and copied all on the fly onto the ramdisk
> 
> Then various (different) attempts:
> 
> - configure md via debian installer
> - configure LVM as above
> - modprobe dm-mod
> 
> ...and then:
> 
> udev
> dmraid -ay
> 
> Doing this I finally get all the partitions shown into
> /dev/mapper/sil_xxx as with Gentoo, I can mount and format them, but
> this is the error when I try to install the base system:
> 
> [installing kernel-2.6.8-386.deb]
> /usr/sbin/mkinitrd: /dev/mapper/sil_xxxx9 is not a valid block device.
> 
> [error message]
> 
> What can I do now?? What could this error mean? It is a fatal error
> that won't quit the installation but would loop to "install base
> system".
> 
> 
> Thank you for reading! ;)
> 
> Regards
> Emiliano Esposito
hi
well i don't know if it is possible with d-i, but doing a chroot install
should be possible
(you already seem to have a bootloader installed, so there should be no
problems)
like discribed here for example
(ok, it is for woody, but that is just a matter of s/woody/sarge/)+
http://www.inittab.de/manuals/debootstrap.html
(should be possible from gentoo to....)


i have not tried it to set up a dmraid setup
(i have not tried that at all-my only ataraid install used a 2.4
kernel...)

but it should work with some customizing i think

yours
Albert


-- 
Albert Dengg <a_d@xxxxxx>

Attachment: pgpstEt5zk2zB.pgp
Description: PGP signature

_______________________________________________

Ataraid-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/ataraid-list

[Index of Archives]     [Linux RAID]     [Linux Device Mapper]     [Linux IDE]     [Linux SCSI]     [Kernel]     [Linux Books]     [Linux Admin]     [GFS]     [RPM]     [Yosemite Campgrounds]     [AMD 64]

  Powered by Linux