Heinz Mauelshagen a écrit : > As Molle mentioned: please try 1.0.0.rc8 which should help your case. ok # dmraid --version dmraid version: 1.0.0.rc8 (2005.05.19) dmraid library version: 1.0.0.rc8 (2005.05.19) device-mapper version: 4.4.0 # dmsetup version Library version: 1.01.01 (2005-03-29) Driver version: 4.4.0 >>>>When I've run: >>>>$ dmraid -ay >>>> >>>>I get a new device: >>>>/dev/mapper/pdc_gjbjdagge I still need to run manually dmraid -ay to enable /dev/mapper/pdc_gjbjdagge *cfdisk /dev/mapper/pdc_gjbjdagge shows me almost disk (only 15MB seem to be lost on /dev/sda or sdb). I've succeeded in adding partitions: Name Flags Part Type FS Type [Label] Size (MB) ---------------------------------------------------------------- pdc_gjbjdagge1 Boot Primary Linux ext3 131.61 pdc_gjbjdagge2 Primary Linux LVM 159866.55 partitions are OK I would like to use lvm2 on /dev/mapper/pdc_gjbjdagge2, so I've tried # pvcreate /dev/mapper/pdc_gjbjdagge2 File descriptor 3 left open File descriptor 4 left open File descriptor 5 left open Device /dev/mapper/pdc_gjbjdagge2 not found. I don't know what's wrong? I remember that disk utility on fedora core 3/4 works well to manage lvm, what do you advise me to set 2 logical part in logical volume taking place in /dev/mapper/pdc_gjbjdagge2 ? Nicolas _______________________________________________ Ataraid-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/ataraid-list
