On Wed, Apr 20, 2005 at 09:45:47PM -0700, ben morse wrote: > I already emaild this to Heinz, but I can't get raid 0 to work on my > machine with 3 devices. It works just fine with 2, but not with 3. > When I setup 3 devices, the stride gets read totally wrong, and I get > the error: > ERROR: dos: reading /dev/mapper/nvidia_bhddebdb[Device or resource busy] > > So I don't know, it seems like this would be a simple fix, but I don't > much about C, so just letting you know. Thanks for the awesome program. > -ben Ben, I had another stride size related report this week and fixed a related bug which is likely to address your issue as well. Will get another dmraid release with that fix out next week. > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/ataraid-list -- Regards, Heinz -- The LVM Guy -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Heinz Mauelshagen Red Hat GmbH Consulting Development Engineer Am Sonnenhang 11 56242 Marienrachdorf Germany Mauelshagen@xxxxxxxxxx +49 2626 141200 FAX 924446 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
