On Wed, Aug 18, 2004 at 01:25:56AM -0700, paul moore wrote: > > I just updated to 2.6.8 to see if it would fix a > couple of problems I had. Well, what I found was a big > ticking Easter egg. In xconfigure under Enhanced > IDE/MFM/RLL... under ATA/ATAPI/MFM/RLL Support I > found: > Support for SATA (Depreciated; conflicts with libata > SATA driver). In the comments it says to use the SATA > driver under SCSI device support. The SCSI version > does not work with DMRAID. The drives show up in the > log, but DMRAID does not see them. Does "dmraid -r -vvv" display them ? Likely a devnode namespace issue. > As a side note, I had all of this working as a raid0 > with 2.6.7 (without the RAID 1 patches), but could > only see six of my eight partitions. Sounds like a flaw in group_rd() in dmraid file lib/format/partition/dos.c. Would be helpful if you could send me copies of the (S)ATARAID metadata and the size of the drives in the set in sectors. > I've tried > tweaking the code all the way down into the kernel > with no luck. Is there something I am missing, or am I > just dumbstruck? No, you just have a new wonderful configuration ;) > > Tell me it isn't so. > Paul > > > > > > __________________________________ > Do you Yahoo!? > New and Improved Yahoo! Mail - 100MB free storage! > http://promotions.yahoo.com/new_mail > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/ataraid-list -- Regards, Heinz -- The LVM Guy -- *** Software bugs are stupid. Nevertheless it needs not so stupid people to solve them *** =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Heinz Mauelshagen Red Hat GmbH Consulting Development Engineer Am Sonnenhang 11 56242 Marienrachdorf Germany Mauelshagen@xxxxxxxxxx +49 2626 141200 FAX 924446 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
