I tried 3 different drivers, and only the Fastrak lite driver for RH 7.x got close. When it doesn't crash, it gives me errors on not finding the cd, so I got rid of the ide3=0 (the location of my cd drive- duh!) in the arguments and it did not see 2 disks. However, it seemed to think it was a RAID 1 array, since the device that showed up was 40 GB. -------Original Message------- From: Samuel Flory <sflory@xxxxxxxxxxxx> Sent: 07/24/03 04:58 PM To: ataraid-list@xxxxxxxxxx Subject: Re: Installing RH 9.0 on PDC20265 > > Greg Tallis wrote: > Help! > I am pretty new to Linux, and I am having trouble installing on > a RAID 0 array. I have a Gigabyte GA-7DXR motherboard with > the PDC20265R Fastrack 100 "Lite" ATARAID controller. > When I do the normal RH 9.0 install it detects 2 40GB drives. > When I use a driver diskette, it does not detect any drives at all. > Have you read the readme on the driver disk? > I have another drive I can use, but I would prefer to use the RAID. > Linux Software RAID is not an option since I also need Windows > to use the array. If anyone can tell me where to get drivers and > how to use them, I would appreciate it. -- Once you have their hardware. Never give it back. (The First Rule of Hardware Acquisition) Sam Flory <sflory@xxxxxxxxxxxx> _______________________________________________ Ataraid-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/ataraid-list >
