Hi,
I have a promise fastrack133 on my M/B. Unfortunately when the drive becaome
half full (30 GB) is starts giving me the following error message:
"<4>hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdg: dma_intr: error=0x84 { DriveStatusError BadCRC }"
I don't know if it is the promise or because my M/B is a GA-7DXR+ with a
athlon chip. Can anyone help?
I join my all log, just in case it helps. Also I have a great new feature in
my flashed bios, I can disable the RAID and make ATA (according to the doc
it would give me IDE3 and ID4). Would using the native linux RAID solve my
problem?
Regards
Yoram
Inspecting /boot/System.map-2.4.19-4GB
Loaded 14220 symbols from /boot/System.map-2.4.19-4GB.
Symbols match kernel version 2.4.19.
Loaded 235 symbols from 7 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.19-4GB (root@xxxxxxxxxxxxxx) (gcc version 3.2) #1 Tue
Oct 15 02:57:46 UTC 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>511MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0001000
<6>Advanced speculative caching feature present
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<6>ACPI: RSDP (v000 GBT ) @ 0x000f6ea0
<6>ACPI: RSDT (v001 GBT AWRDACPI 16944.11825) @ 0x1fff3000
<6>ACPI: FADT (v001 GBT AWRDACPI 16944.11825) @ 0x1fff3040
<6>ACPI: MADT (v001 GBT AWRDACPI 16944.11825) @ 0x1fff5c00
<6>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 Pentium(tm) Pro APIC version 16
<6>ACPI: LAPIC_NMI (acpi_id[0xff] polarity[0x0] trigger[0x0] lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
<6>IOAPIC[0]: Assigned apic_id 2
<4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0]
trigger[0x0])
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3]
trigger[0x3])
<6>Using ACPI (MADT) for SMP configuration information
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/sda5 hda=ide-scsi vga=791
<4>ide_setup: hda=ide-scsi
<6>Initializing CPU#0
<4>Detected 1474.232 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 2942.56 BogoMIPS
<6>Memory: 513876k/524224k available (1685k kernel code, 9960k reserved,
413k data, 164k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode...
Ok.
<6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<7>CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
<6>Advanced speculative caching feature present
<6>Disabling advanced speculative caching
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After vendor init, caps: 0383fbf7 c1c3fbff 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0383fbf7 c1c3fbff 00000000 00000000
<7>CPU: Common caps: 0383fbf7 c1c3fbff 00000000 00000000
<4>CPU: AMD Athlon(tm) XP 1700+ stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
<4>mtrr: detected mtrr type: Intel
<6>ACPI: Subsystem revision 20020829
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb700, last bus=1
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
<6>PCI: Probing PCI hardware
<6>PCI: Using IRQ router VIA [1106/0686] at 00:07.0
<6>PCI: Enabling Via external APIC routing
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
<5>apm: overridden by ACPI.
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>kinoded started
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<5>aio_setup: num_physpages = 32764
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xe4000000, mapped to 0xe0813000, size 32768k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=20
<6>vesafb: protected mode interface info at c000:441b
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for splash picture.... found (1024x768, 27920 bytes).
<4>Console: switching to colour frame buffer device 106x34
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 39
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
<4> ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:pio, hdd:pio
<4>PDC20276: IDE controller on PCI bus 00 dev 80
<6>PCI: Found IRQ 10 for device 00:10.0
<6>PCI: Sharing IRQ 10 with 00:07.2
<6>PCI: Sharing IRQ 10 with 00:07.3
<6>PCI: Sharing IRQ 10 with 00:0f.0
<4>PDC20276: chipset revision 1
<4>PDC20276: not 100%% native mode: will probe irqs later
<4>PDC20276: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode.
<4> ide2: BM-DMA at 0xe000-0xe007, BIOS settings: hde:pio, hdf:pio
<4> ide3: BM-DMA at 0xe008-0xe00f, BIOS settings: hdg:pio, hdh:pio
<4>hda: RICOH DVD/CDRW MP9200, ATAPI CD/DVD-ROM drive
<4>hde: MAXTOR 6L060J3, ATA DISK drive
<4>hdg: MAXTOR 6L060J3, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide2 at 0xd000-0xd007,0xd402 on irq 10
<4>ide3 at 0xd800-0xd807,0xdc02 on irq 10
<4>blk: queue c039cfbc, I/O limit 4095Mb (mask 0xffffffff)
<4>hde: failed write cache flush, disabling ordered write support
<6>hde: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=116336/16/63,
UDMA(133)
<4>blk: queue c039d318, I/O limit 4095Mb (mask 0xffffffff)
<4>hdg: failed write cache flush, disabling ordered write support
<6>hdg: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=116336/16/63,
UDMA(133)
<4>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hde: hde1
<6> hdg: hdg1
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
<6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
<4>ide-floppy driver 0.99.newide
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 475k freed
<4>VFS: Mounted root (ext2 filesystem).
<6>PCI: Found IRQ 11 for device 00:0a.0
<6>PCI: Sharing IRQ 11 with 00:0e.0
<6>PCI: Sharing IRQ 11 with 00:11.2
<6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<4> <Adaptec 2940 Ultra SCSI adapter>
<4> aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
<4>
<4>blk: queue c19f0c14, I/O limit 4095Mb (mask 0xffffffff)
<4> Vendor: IBM Model: DNES-318350W Rev: SA30
<4> Type: Direct-Access ANSI SCSI revision: 03
<4>blk: queue c1d1d014, I/O limit 4095Mb (mask 0xffffffff)
<4>(scsi0:A:1): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
<4> Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>blk: queue c1d1d814, I/O limit 4095Mb (mask 0xffffffff)
<4>scsi0:A:1:0: Tagged Queuing enabled. Depth 32
<7>sd_init()
<4>sd: allocated major 8
<7>sd_attach()
<7>sd: find_free_slot ...<7>sd: ... found 08:00
<4>Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
<7>sd_attach()
<7>sd_finish()
<7>sd_init_onedisk (0,0), sda 08:00
<4>SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
<6> sda: sda1 sda3 < sda5 sda6 >
<6> ataraid/d0: ataraid/d0p1
<6>Drive 0 is 57259 Mb (33 / 0)
<6>Drive 1 is 57259 Mb (34 / 0)
<6>Raid1 array consists of 2 drives.
<6>Promise Fasttrak(tm) Softwareraid driver for linux version 0.03beta
<6>Journalled Block Device driver loaded
<4>hda: no flushcache support
<6>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: RICOH Model: DVD/CDRW MP9200 Rev: 1.00
<4> Type: CD-ROM ANSI SCSI revision: 02
<7>sd_init()
<7>sd_attach()
<7>sd_finish()
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>VFS: Mounted root (ext3 filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 164k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,5), internal journal
<6>LVM version 1.0.5(mp-v6)(15/07/2002) module loaded
<6>Adding Swap: 1606460k swap-space (priority 42)
<4>hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdg: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdg: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdg: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdg: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>blk: queue c039d318, I/O limit 4095Mb (mask 0xffffffff)
<4>PDC202XX: Secondary channel reset.
<4>ide3: reset: success
<6>EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,5), internal journal
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.18, 14 May 2002 on ataraid(114,1), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sun May 4 02:26:45 2003
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRun file system check on root for LVM activation
fsck 1.28 (31-Aug-2002)
/ (/dev/sda5): clean, 162998/2011296 files, 718685/4016242 blocks
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume
group
Activating LVM volume groups...
vgchange -- no volume groups found
done
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.28 (31-Aug-2002)
/ (/dev/sda5): clean, 162998/2011296 files, 718685/4016242 blocks
/boot (/dev/sda1): clean, 35/62248 files, 17159/248976 blocks
/dev/ataraid/d0p1: clean, 42377/7325696 files, 7704001/14648374 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda1 on /boot type ext3 (rw)
/dev/ataraid/d0p1 on /mnt/data type ext3 (rw)
doneRestore device permissions
done
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shm
done
Setting up the CMOS clock
done
Setting up timezone data
done
Setting up hostname 'linux'
done
Setting up loopback interface
done
Enabling syn flood protection
done
Disabling IP forwarding
done
Creating /var/log/boot.msg
done<notice>killproc: kill(35,29)
Running /etc/init.d/boot.local
Boot logging started on /dev/tty1(/dev/console) at Sun May 4 02:26:57 2003
Master Resource Control: previous runlevel: N, switching to runlevel:
3
done<notice>killproc: kill(35,3)
INIT: Entering runlevel: 3
<notice>/etc/init.d/rc3.d/S01isdn start
<notice>'/etc/init.d/rc3.d/S01isdn start' exits with status 0
<notice>/etc/init.d/rc3.d/S01random start
Initializing random number generator
done
<notice>'/etc/init.d/rc3.d/S01random start' exits with status 0
<notice>/etc/init.d/rc3.d/S05network start
Setting up network interfaces:
lo
done
eth0 IP/Netmask: 192.168.0.100 / 255.255.255.0
done
<notice>'/etc/init.d/rc3.d/S05network start' exits with status 0
<notice>/etc/init.d/rc3.d/S06syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [
/sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/
PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>
done
startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82
REDIRECT=/dev/tty1 COLUMNS=106
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/
PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/klogd ]
<notice>'/etc/init.d/rc3.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc3.d/S07hotplug start
Starting hotplugging services [ net pci usb .. ]
done
<notice>'/etc/init.d/rc3.d/S07hotplug start' exits with status 0
<notice>/etc/init.d/rc3.d/S09portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [
/sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/
PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc3.d/S09portmap start' exits with status 0
<notice>/etc/init.d/rc3.d/S09splash_early start
<notice>'/etc/init.d/rc3.d/S09splash_early start' exits with status 0
<notice>/etc/init.d/rc3.d/S09sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [
/usr/sbin/sshd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/
PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc
DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc3.d/S09sshd start' exits with status 0
<notice>/etc/init.d/rc3.d/S13alsasound start
Starting sound driver: ens1371
done
Restoring the previous sound setting
done
<notice>'/etc/init.d/rc3.d/S13alsasound start' exits with status 0
<notice>/etc/init.d/rc3.d/S13fbset start
<notice>'/etc/init.d/rc3.d/S13fbset start' exits with status 0
<notice>/etc/init.d/rc3.d/S13rpmconfigcheck start
<notice>'/etc/init.d/rc3.d/S13rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc3.d/S14kbd start
Loading keymap qwerty/uk.map.gz
doneKeyboard: Typematic Rate set to 24.0 cps (delay = 500 ms)
doneLoading compose table latin1.add
done
Loading console font lat1-16.psfu
doneLoading screenmap none
doneSetting up console ttys
done<notice>'/etc/init.d/rc3.d/S14kbd start' exits with status 0
<notice>/etc/init.d/rc3.d/S14postfix start
Starting mail service (Postfix)
done
<notice>'/etc/init.d/rc3.d/S14postfix start' exits with status 0
<notice>/etc/init.d/rc3.d/S14splash start
<notice>'/etc/init.d/rc3.d/S14splash start' exits with status 0
<notice>/etc/init.d/rc3.d/S15atd start
Starting service at daemon<notice>startproc: execve (/usr/sbin/atd) [
/usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/
PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
<notice>'/etc/init.d/rc3.d/S15atd start' exits with status 0
<notice>/etc/init.d/rc3.d/S15cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [
/usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=106
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/
PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc
DAEMON=/usr/sbin/cron ]
done
Starting hardware scan on boot<notice>'/etc/init.d/rc3.d/S15cron start'
exits with status 0
<notice>/etc/init.d/rc3.d/S15hwscan start
Starting Name Service Cache Daemon<notice>'/etc/init.d/rc3.d/S15hwscan
start' exits with status 0
<notice>/etc/init.d/rc3.d/S15nscd start
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82
REDIRECT=/dev/tty1 COLUMNS=106
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=791 RUNLEVEL=3 PWD=/
PREVLEVEL=N LINES=34 HOME=/ SHLVL=2 _=/sbin/startproc
DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc3.d/S15nscd start' exits with status 0
<notice>/etc/init.d/rc3.d/S21splash_late start
<notice>'/etc/init.d/rc3.d/S21splash_late start' exits with status 0
<notice>/etc/init.d/rc3.d/S31samba start
Starting SMBD daemon
done
Starting NMBD daemon
done
<notice>'/etc/init.d/rc3.d/S31samba start' exits with status 0
<notice>/etc/init.d/rc3.d/S32dhcpd start
Starting DHCPD daemonInternet Software Consortium DHCP Server V3.0pl2
Copyright 1995-2003 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Wrote 2 leases to leases file.
Listening on LPF/eth0/00:02:1b:f4:01:ac/192.168.0.0/24
Sending on LPF/eth0/00:02:1b:f4:01:ac/192.168.0.0/24
Sending on Socket/fallback/fallback-net
done
<notice>'/etc/init.d/rc3.d/S32dhcpd start' exits with status 0
