hi there.
i’m trying to get my HPT370 raid working under linux..
here’s my system:
Abit BP6 Mainboard
Dawicontrol HPT370A Raid Controller
2 WDC WD800BB 80 GB ide drives
kernel: 2.4.18 or 2.4.17… try both..
I’ve already updated
the controller bios to the newest version…
The raid gets detected by the
driver software but :
Mar 4 02:10:35 ftp kernel: hde: 156301488
sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63
Mar 4 02:10:35 ftp kernel: hdg: 156301488
sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63
Mar 4 02:10:35 ftp kernel: hdc: ATAPI 24X
CD-ROM drive, 128kB Cache, DMA
Mar 4 02:10:35 ftp kernel: Uniform CD-ROM driver Revision: 3.12
Mar 4 02:10:35 ftp kernel: Partition check:
Mar 4 02:10:35 ftp kernel:
hda: hda1 hda2 hda3
Mar 4 02:10:35 ftp kernel:
hdb: hdb1
Mar 4 02:10:35 ftp kernel:
hde:hde: lost interrupt
Mar 4 02:10:35 ftp kernel: hde: lost
interrupt
Mar 4 02:10:35 ftp last message repeated 2 times
Mar 4 02:10:35 ftp kernel:
unknown partition table
Mar 4 02:10:35 ftp kernel:
hdg:hdg: lost interrupt
Mar 4 02:10:35 ftp kernel: hdg: lost
interrupt
Mar 4 02:10:35 ftp last message repeated 2 times
Mar 4 02:10:35 ftp kernel:
unknown partition table
Mar 4 02:10:35 ftp kernel: loop: loaded (max 8 devices)
Mar 4 02:10:35 ftp kernel: 8139too Fast Ethernet driver 0.9.24
Mar 4 02:10:35 ftp kernel: eth0: RealTek
RTL8139 Fast Ethernet at 0xd080c000, 00:50:22:40:4a:6e, IRQ 11
Mar 4 02:10:35 ftp kernel: eth0: Identified 8139 chip type 'RTL-8139C'
Mar 4 02:10:35 ftp kernel:
Linux agpgart interface v0.99 (c) Jeff Hartmann
Mar 4 02:10:35 ftp kernel: agpgart:
Maximum main memory to use for agp memory: 203M
Mar 4 02:10:35 ftp kernel: agpgart:
Detected Intel 440BX chipset
Mar 4 02:10:35 ftp kernel: agpgart: AGP
aperture is 64M @ 0xd0000000
Mar 4 02:10:35 ftp kernel: hde: lost
interrupt
Mar 4 02:10:35 ftp kernel: hdg: lost
interrupt
Mar 4 02:10:35 ftp kernel:
ataraid/d0:hde: lost interrupt
Mar 4 02:10:35 ftp kernel:
unknown partition table
Mar 4 02:10:35 ftp kernel: Highpoint HPT370 Softwareraid
driver for linux version 0.01
Mar 4 02:10:35 ftp kernel: Drive 0 is 76319 Mb
Mar 4 02:10:35 ftp kernel: Drive 1 is 76319 Mb
Mar 4 02:10:35 ftp kernel: Raid array consists of 2 drives.
lost interrupt….. I really don’t know how to
fix this problem…
so I would be glad if someone could help me.
Thanks
Thorsten Klingert
