----- Original Message ----- From: Helge Lenz <h.lenz@xxxxxx> To: <ataraid-list@xxxxxxxxxx> Sent: Thursday, November 08, 2001 10:05 PM Subject: Re: RH 7.2 and TX4 > Michael Steinhart wrote: > > >HI all > > > >This is my first post to this list. > >I am building several new servers over the next day or two and I need to have them on-line on > >Monday morning. I will be using the Promise Fast Track 100 TX4 controller with a Gigabyte GA- > >7ZXR (Rev 3.X). The onboard Gigabyte controller will be disabled on the GA-7ZXR. I am want to > >use Redhat 7.2 on these servers. So my question is: is there a driver disk or boot disk image > >available for the TX4 and RH 7.2? I can use the binary drivers that Promise has for RH 7.1 but I > >would rather use the open source drivers and RH 7.2 if possible. Also is there step by step > >instruction available if there is not a boot image disk or a driver disk. > > > >Thank you in advance > >Michael Steinhart > >PMH Systems > >mike@xxxxxxxxxxxx > > > > > >______________________________________________________________ > > > >Michael Steinhart OPCenter > >mike@xxxxxxxxxxxx PMH Network Services, Inc. > >http://www.opcenter.net 284 Ackerman Ave > > Emerson, NJ 07630 > > > > > > > >_______________________________________________ > > > >Ataraid-list@xxxxxxxxxx > >https://listman.redhat.com/mailman/listinfo/ataraid-list > > > > > If you want to build servers, it is probably better (and faster) to use > the software raid features from linux and not the ataraid drivers. So > you don´t need any driver disk. > > Helge. Well, That's only a options when booting linux from a NON - RAID array, isn't? - Cornee -
