I have done it all.. When i do an cfdisk on the /dev/ataraid/d1p1 i get Fatal ERROR: Cannot open disk drive on the one that works > /dev/ataraid/d0p1 i get Fatal ERROR: Bad Primary partition 0: etcetra.. and thats totaly ok becuse its soupposed to be like that, one of the disks i think...... but it shuld be the same on the first one ! right ? ----- Original Message ----- From: "Andrew Klaassen" <ak@xxxxxxx> To: <ataraid-list@xxxxxxxxxx> Sent: Monday, September 24, 2001 9:30 PM Subject: Re: dual raid.. > On Mon, Sep 24, 2001 at 09:23:09PM +0200, > Nils Nilsson wrote: > > > Im curius is there ANY one that have gotten 2 "different"(one > > of them is an onboard light controller) RAID controllers > > working with the 2.4.10 and the patch "patch-to-2.4.10" ? > > > > Becuse i cant.. it seems to work but i cant find the damn > > device file fore it.. > > The driver says that it shuld work with 2 cards.. but it > > dosent say how i can access the second card.. > > And the small shell script that is creating the device files > > is only making d0 series not d1 series !! how am i supposed to > > DO THIS ! > > Have you tried something like > > mknod /dev/ataraid/d1 b <MAJOR> <MINOR> > > ...? > > (Replace <MAJOR> and <MINOR> with the correct numbers, of > course... anybody know what those number are?) > > Andrew Klaassen > > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/ataraid-list >
