On Thu, Jul 26, 2001 at 11:46:39PM -0400, Arjan van de Ven wrote: > On Thu, Jul 26, 2001 at 09:59:24PM -0400, Andrew Klaassen wrote: > > I'm trying to get software RAID working over 4 Fasttrack100 > > cards running in JBOD mode, but the regular ATA driver in > > the 2.4 kernels (chipset is reported as PDC20267) is giving > > me (random) data errors. (It's not the RAID code; the data > > errors occur simply writing to/reading from the drives with > > dd.) > check your cables, tohse are usually at fault in such cases Oh - I should've mentioned - we've done so. We've also checked everything else we could think of, in every different way we could think of, and we're quite sure we've narrowed it down to the cards. (The clincher for us was the fact that every combination of cable and drive with a CMD648 based controller didn't give us corruption, and every combination of cable and drive with a Fasttrack100 controller did give corruption.) > the driver layers on top of the ide drivers, so if those are > not working, the driver doesn't help... Who would I contact about that? (I haven't been able to find a "linux-ide" list or the like...) Thanks. Andrew Klaassen
