Hi All,
I am using a Sangoma card and it has been working fine for a few years. The
carrier is switching switches and we need to set up a new link in parallel.
The carrier says that they see lawyer 1 up but I see it as down. Here is
what I get on my box:
[root at gw2 asterisk]# /etc/init.d/wanrouter status
Devices currently active:
wanpipe1 wanpipe2
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud
rate |
wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 233 | 1 | 1 |
N/A | 0 |
wanpipe2 | N/A | A101/1D/A102/2D/4/4D/8| 233 | 1 | 1 |
N/A | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status |
wanpipe1 | AFT TE1 | N/A | Connected |
wanpipe2 | AFT TE1 | N/A | Disconnected |
My config looks like this:
[root at gw2 asterisk]# cat /etc/asterisk/chan_dahdi.conf
;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2010-12-01
;Dahdi Channels Configurations
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak
[trunkgroups]
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
;;Sangoma A102 port 1 [slot:1 bus:10 span:1] <wanpipe1>
;switchtype=euroisdn
context=from-pstn
;group=0
;echocancel=yes
;signalling=pri_cpe
;channel =>1-15,17-31
;;Sangoma A102 port 2 [slot:1 bus:10 span:2] <wanpipe2>
;switchtype=euroisdn
;context=from-pstn
;group=0
;echocancel=yes
;signalling=pri_cpe
;channel =>32-46,48-62
signalling = ss7
ss7type = itu
networkindicator = national
linkset = 1
pointcode = XX07
adjpointcode = XX02
defaultdpc = XX02
cicbeginswith = 1
channel=1-15
cicbeginswith = 17
channel = 17-31
sigchan = 16
group=0
ss7_called_nai=national
ss7_calling_nai=national
;Adding below for new SS7 link with Verizon
signalling = ss7
ss7type = itu
networkindicator = national
linkset = 2
pointcode = XX07
adjpointcode = XX04
defaultdpc = XX04
cicbeginswith = 1
channel=1-15
cicbeginswith = 1
channel = 17-31
sigchan = 16
group=1
I am still running on LibSS7 1.X since that is what is working and I can't
break what is working now. Any tips on what I may be doing wrong?
Regards,
Dovid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20150615/3b9ef9d6/attachment.html>
|