Can you post your config files? in the system.conf bchan=1-15,17-31 dchan=16 Regards On Mon, Mar 18, 2013 at 1:44 PM, amine <ferhi.med.amine at gmail.com> wrote: > @Goke M Aruna : The used cable is a pri crossed cable. > > Telephony card : OpenVox PRI x 4Ports > > > On 03/18/2013 12:36 PM, Goke M Aruna wrote: > > Are you using a straight cable or cross cable? > > Regards > > On Mon, Mar 18, 2013 at 12:18 PM, amine <ferhi.med.amine at gmail.com> wrote: > >> Hi All, >> >> @Matthias van der Vlies : Thanks a lot for the information, indeed that >> was the solution for my first problem. >> >> Now I have a Link with the state INSERVICE in both machines. >> >> Machine 1: >> >> # rasterisk -x "ss7 link status" >> >> linkset:siuc, link:l2/16, state:INSERVICE, sls:1, total: 1261312/1261328 >> >> >> >> Machine 2: >> >> # rasterisk -x "ss7 link status" >> >> linkset:siuc, link:l2/16, state:INSERVICE, sls:1, total: 1493920/1493952 >> >> >> Still i have the next issues : >> >> CLI> ss7 linestat >> >> Linkset: siuc >> >> CIC 1 Idle Reset pending >> >> CIC 2 Idle Reset pending >> >> CIC 3 Idle Reset pending >> >> CIC 4 Idle Reset pending >> >> CIC 5 Idle Reset pending >> >> CIC 6 Idle Reset pending >> >> CIC 7 Idle Reset pending >> >> CIC 8 Idle Reset pending >> >> CIC 9 Idle Reset pending >> >> CIC 10 Idle Reset pending >> >> CIC 11 Idle Reset pending >> >> CIC 12 Idle Reset pending >> >> CIC 13 Idle Reset pending >> >> CIC 14 Idle Reset pending >> >> CIC 15 Idle Reset pending >> >> CIC 17 Idle Reset pending >> >> CIC 18 Idle Reset pending >> >> CIC 19 Idle Reset pending >> >> CIC 20 Idle Reset pending >> >> CIC 21 Idle Reset pending >> >> CIC 22 Idle Reset pending >> >> CIC 23 Idle Reset pending >> >> CIC 24 Idle Reset pending >> >> CIC 25 Idle Reset pending >> >> CIC 26 Idle Reset pending >> >> CIC 27 Idle Reset pending >> >> CIC 28 Idle Reset pending >> >> CIC 29 Idle Reset pending >> >> CIC 30 Idle Reset pending >> >> CIC 31 Idle Reset pending >> >> >> And within the logs, I have the next messages : >> >> [Mar 18 11:20:28] NOTICE[10687]: l4isup.c:1559 t22_timeout: T22 timeout (No "circuit group reset acknowledge" from peer) CIC=1. >> >> [Mar 18 11:20:28] NOTICE[10687]: l4isup.c:1559 t22_timeout: T22 timeout (No "circuit group reset acknowledge" from peer) CIC=17. >> >> [Mar 18 11:20:28] WARNING[10687]: l4isup.c:5057 l4isup_event: Received UEC (CIC 1), link 'l2'. >> >> [Mar 18 11:20:28] WARNING[10687]: l4isup.c:5069 l4isup_event: Received CIC=1 for unequipped circuit (typ=UEC), link 'l2'. >> >> [Mar 18 11:20:28] WARNING[10687]: l4isup.c:5057 l4isup_event: Received UEC (CIC 17), link 'l2'. >> >> [Mar 18 11:20:28] WARNING[10687]: l4isup.c:5069 l4isup_event: Received CIC=17 for unequipped circuit (typ=UEC), link 'l2'. >> >> [Mar 18 11:20:39] WARNING[10687]: l4isup.c:5057 l4isup_event: Received GRS (CIC 1), link 'l2'. >> >> [Mar 18 11:20:39] WARNING[10687]: l4isup.c:5069 l4isup_event: Received CIC=1 for unequipped circuit (typ=GRS), link 'l2'. >> >> [Mar 18 11:20:39] WARNING[10687]: l4isup.c:5057 l4isup_event: Received GRS (CIC 17), link 'l2'. >> >> [Mar 18 11:20:39] WARNING[10687]: l4isup.c:5069 l4isup_event: Received CIC=17 for unequipped circuit (typ=GRS), link 'l2'. >> >> >> Any information is welcomed, Thanks in advance. >> >> Best regards. >> Amine >> >> >> On 03/18/2013 10:33 AM, Matthias van der Vlies wrote: >> >> In case you have HW echo cancellation: don't forget to disable echo >> cancellation on your signalling channel. >> >> Kind regards, >> Matthias van der Vlies >> >> On 03/18/2013 11:23 AM, amine wrote: >> >> Hi All, >> >> I am new to Asterisk and SS7, I will be exposing the details of my >> problem here hoping for guidance and/or hints about things that I might >> missed within my configuration. >> >> *Objective : * >> - Set up SS7 between two Asterisk Boxes using chan_ss7 using PRI >> Telephony cards cabled directly with a PRI cable. >> >> *Current configuration :* >> - Asterisk : 1.4.39.2 >> - Dahdi : 2.5.0.2 >> - Kernel : 2.6.30.10 >> - chan_ss7 : 2.1.0 >> - 2 Machines : Machine1 (ipbrick144 | 172.31.3.144) + Machine2 >> (ipbrick145 | 172.31.3.145) >> - chan_dahdi unloaded, chan_ss7 loaded >> >> The chan_ss7 loads without problem, but i am not able to have an ALIGNED >> Link in both machines. >> >> # rasterisk -x "ss7 link status" >> >> linkset:siuc, link:l2/16, state:NOT_ALIGNED, sls:1, total: 1857882016/1857882048 >> >> CLI> ss7 linestat >> >> Linkset: siuc >> >> CIC 1 Idle Reset pending >> >> CIC 2 Idle Reset pending >> >> CIC 3 Idle Reset pending >> >> CIC 4 Idle Reset pending >> >> CIC 5 Idle Reset pending >> >> CIC 6 Idle Reset pending >> >> CIC 7 Idle Reset pending >> >> CIC 8 Idle Reset pending >> >> CIC 9 Idle Reset pending >> >> CIC 10 Idle Reset pending >> >> CIC 11 Idle Reset pending >> >> CIC 12 Idle Reset pending >> >> CIC 13 Idle Reset pending >> >> CIC 14 Idle Reset pending >> >> CIC 15 Idle Reset pending >> >> CIC 17 Idle Reset pending >> >> CIC 18 Idle Reset pending >> >> CIC 19 Idle Reset pending >> >> CIC 20 Idle Reset pending >> >> CIC 21 Idle Reset pending >> >> CIC 22 Idle Reset pending >> >> CIC 23 Idle Reset pending >> >> CIC 24 Idle Reset pending >> >> CIC 25 Idle Reset pending >> >> CIC 26 Idle Reset pending >> >> CIC 27 Idle Reset pending >> >> CIC 28 Idle Reset pending >> >> CIC 29 Idle Reset pending >> >> CIC 30 Idle Reset pending >> >> CIC 31 Idle Reset pending >> >> >> - Within the logs, i have the next message : >> >> WARNING[13581] mtp.c: MTP2 timer T2 timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial alignment failed on link 'l2'. >> >> >> - Within the console, i have the next messages when i manually load >> chan_ss7 : >> >> ] NOTICE[23391]: config.c:805 load_config_link: Configured link 'l1' on linkset 'siuc', firstcic=1 >> >> [Mar 15 16:49:38] NOTICE[23391]: config.c:1278 load_config: Configuring OPC 1, DPC 2 for linkset 'siuc'. >> >> -- Starting cluster thread, pid=23209. >> >> == Registered channel type 'SS7' (SS7 Protocol Driver) >> >> -- Starting continuity check thread, pid=23209. >> >> [Mar 15 16:49:38] NOTICE[23391]: mtp.c:2467 mtp_init: Initialising 1 signalling links >> >> -- Starting MTP thread, pid=23209. >> >> [Mar 15 16:49:38] WARNING[23391]: utils.c:176 start_thread: Failed to set thread to realtime priority: Operation not permitted. >> >> -- Starting monitor thread, pid=23209. >> >> [Mar 15 16:49:38] NOTICE[23418]: mtp.c:2348 mtp_init_link: Initialising link 'l1/16', linkset 'siuc', sls 0. >> >> [Mar 15 16:49:38] NOTICE[23418]: mtp.c:2366 mtp_init_link: Signalling channel on link 'l1/16' has signalling type 0x0080. >> >> [Mar 15 16:49:38] NOTICE[23418]: mtp.c:2063 mtp_thread_main: Empty Dahdi output buffer detected, outgoing packets may have been lost on link 'l1'. >> >> -- SS7 channel loaded successfully. >> >> Loaded chan_ss7.so => (SS7 Protocol Support) >> >> >> >> - The next configuration is the same between the two Asterisk boxes. >> >> *ss7.conf** >> * >> >> [linkset-siuc] >> >> ; The linkset is enabled >> >> enabled => yes >> >> ; The end-of-pulsing (ST) is not used to determine when incoming address is complete >> >> enable_st => no >> >> ; Reply incoming call with CON rather than ACM and ANM >> >> use_connect => yes >> >> ; The CIC hunting policy (even_mru, odd_lru, seq_lth, seq_htl) is even CIC numbers, most recently used >> >> hunting_policy => seq_lth >> >> ; Incoming calls are placed in the ss7 context in the asterisk dialplan >> >> context => ss7 >> >> ; The language for this context is da >> >> language => da >> >> ; The value and action for t35. Value is in msec, action is either st or timeout >> >> ; If you use overlapped dialling dial plan, you might choose: t35 => 4000,st >> >> t35 => 15000,timeout >> >> ; The subservice field: national (8), international (0), auto or decimal/hex value >> >> ; The auto means that the subservice is obtained from first received SLTM >> >> subservice => auto >> >> ; The host running the mtp3 service >> >> ;mtp3server => localhost >> >> [link-l1] >> >> sltm => no >> >> linkset => siuc >> >> channels => 1-15,17-31 >> >> schannel => 16 >> >> firstcic => 1 >> >> enabled => yes >> >> [link-l2] >> >> sltm => no >> >> linkset => siuc >> >> channels => 1-15,17-31 >> >> schannel => 16 >> >> firstcic => 1 >> >> enabled => yes >> >> [host-ipbrick145] >> >> default_linkset=>siuc >> >> enabled => yes >> >> opc => 0x1 >> >> dpc => siuc:0x2 >> >> links => l1:1 >> >> if-1 => 172.31.3.145 >> >> [host-ipbrick144] >> >> default_linkset=>siuc >> >> enabled => yes >> >> opc => 0x1 >> >> dpc => siuc:0x2 >> >> links => l2:1 >> >> if-1 => 172.31.3.144 >> >> >> */etc/dahdi/system.conf *(I tryed using mtp & bchan, the result was the >> same) >> * >> * >> >> span=1,1,0,ccs,hdb3 >> >> bchan=1-15,17-31 >> >> #mtp2=16 >> >> bchan=16 >> >> * >> ** * >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> >> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20130318/96b64a9e/attachment-0001.htm>
|