If your telco has given two point codes then you do not need to change. But the problem is in your point code. You have to change your point code. I think your telco has given one point code for them and one for you. You can try with what I have given if you want. On Dec 17, 2013 11:49 AM, "peterpet" <peterpet at mail.ru> wrote: > Why i need to change telco's point codes configuration? > My PC is 5450 ?! > > > > On 12/17/2013 06:34 PM, Vashkar Chatterjee wrote: > > try to put the value like this > > pointcode = 1890 > adjpointcode = 1802 > defaultdpc = 1802 > > > > > On Tue, Dec 17, 2013 at 10:24 PM, peterpet <peterpet at mail.ru> wrote: > >> Hi everyone, >> >> i have a really strange problem. Signaling is looking OK, but not. >> INSERVICE but DOWN. My Telco did not receive SLTM messages from me. >> >> *ss7 show linkset 2* >> SS7 flags: 0x0 >> SS7 linkset 2 status: Down >> SS7 calling nai: 3 >> SS7 called nai: -1 >> SS7 nationalprefix: 0 >> SS7 internationalprefix: 00 >> SS7 unknownprefix: iwillnotusethisnai >> SS7 networkroutedprefix: iwillnotusethisnai >> SS7 subscriberprefix: >> Switch type: ITU >> Our point code: 5450 >> SLS shift: 0 >> numlinks: 1 >> numsps: 1 >> --------------------------------- >> Adjecent SP PC: 1890 STATE: DOWN >> TRA: T19: not running T21: not running >> Routes: >> DPC State T6 T10 >> Link SLC: 0 NetMngSLS: 0 >> State: INSERVICE, DOWN >> STD Test: failed >> Got, sent : >> Inhibit: >> Changeover: NO >> Tx buffer: 0 >> Tx queue: 0 >> Retrans pos 0 >> CO buffer: 0 >> CB buffer: 0 >> Last FSN: 61 >> MTP3timers: Q707_T1(0s) >> >> >> *cat /etc/asterisk/chan_dahdi.conf* >> >> language=en >> context=from-globul-mobile >> group=3 >> ss7type = itu >> ss7_called_nai=dynamic >> ss7_calling_nai=national >> ss7_nationalprefix=0 >> ss7_internationalprefix=00 >> ss7_networkroutedprefix=iwillnotusethisnai >> ss7_unknownprefix=iwillnotusethisnai >> linkset = 2 >> pointcode = 5450 >> adjpointcode = 1890 >> defaultdpc = 1802 >> networkindicator=national >> cicbeginswith = 1 >> channel = 63-77 >> cicbeginswith = 17 >> channel = 79-93 >> sigchan = 78 >> slc=0 >> mtp3_timer.q707_t1 = 4000 >> mtp3_timer.q707_t2 = 30000 >> mtp3_timer.t1 = 500 >> mtp3_timer.t2 = 700 >> mtp3_timer.t3 = 500 >> mtp3_timer.t4 = 500 >> mtp3_timer.t5 = 500 >> mtp3_timer.t6 = 500 >> mtp3_timer.t10 = 60000 >> mtp3_timer.t12 = 800 >> mtp3_timer.t13 = 800 >> mtp3_timer.t14 = 2000 >> mtp3_timer.t19 = 67000 >> mtp3_timer.t21 = 63000 >> mtp3_timer.t22 = 300000 >> mtp3_timer.t23 = 300000 >> isup_timer.t1 = 30000 >> isup_timer.t2 = 180000 >> isup_timer.t5 = 300000 >> isup_timer.t6 = 90000 >> isup_timer.t7 = 20000 >> isup_timer.t8 = 10000 >> isup_timer.t12 = 15000 >> isup_timer.t13 = 300000 >> isup_timer.t14 = 15000 >> isup_timer.t15 = 300000 >> isup_timer.t16 = 15000 >> isup_timer.t17 = 300000 >> isup_timer.t18 = 15000 >> isup_timer.t19 = 300000 >> isup_timer.t20 = 15000 >> isup_timer.t21 = 300000 >> isup_timer.t22 = 15000 >> isup_timer.t23 = 300000 >> isup_timer.t27 = 240000 >> isup_timer.t33 = 12000 >> isup_timer.t35 = 15000 >> isup_timer.digittimeout = 5000 >> >> *dahdi/system.conf* >> >> dynamic=ethmf,eth3/00:50:C2:65:DE:91/2,31,0 >> >> >> bchan=63-77,79-93 >> mtp2=78 >> alaw=63-77,79-93 >> >> *dahdi_scan 3 | grep alarms* >> >> alarms=OK >> >> >> In asterisk cli with enabled debug for this linkset i have this : >> >> >> >> Len = 20 [ a7 a8 11 81 62 87 52 05 11 a0 32 35 36 34 32 38 36 32 38 38 ] >> FSN: 40 FIB 1 >> BSN: 39 BIB 1 >> >[0] MSU >> [ a7 a8 11 ] >> Network Indicator: 2 Priority: 0 User Part: STD_TEST (1) >> [ 81 ] >> OPC 5450 DPC 1890 SLS 0 >> [ 62 87 52 05 ] >> H0: 1 H1: 1 >> [ 11 a0 32 35 36 34 32 38 36 32 38 38 ] >> ss7node1*CLI> >> Len = 20 [ a7 a8 11 81 62 87 52 05 11 a0 32 35 36 34 32 38 36 32 38 38 ] >> FSN: 40 FIB 1 >> BSN: 39 BIB 1 >> <[0] MSU >> [ a7 a8 11 ] >> Network Indicator: 2 Priority: 0 User Part: STD_TEST (1) >> [ 81 ] >> OPC 5450 DPC 1890 SLS 0 >> [ 62 87 52 05 ] >> H0: 1 H1: 1 >> [ 11 a0 32 35 36 34 32 38 36 32 38 38 ] >> >> [Dec 17 18:18:21] ERROR[12603]: chan_dahdi.c:10935 dahdi_ss7_error: >> Received message destined for point code 0x762 but we're 0x154a. Dropping >> >> >> if anyone knows what to do in that case, please let me help with some >> advice. >> >> Thank you! >> >> >> Regards, >> Peter Petrov >> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> > > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20131217/a8b7060b/attachment.html>
|