Here is the trail #dahdi_cfg -vvvt | grep MTP2 DAHDI Tools Version - 2.3.0 Channel 16: MTP2 (Default) (Echo Canceler: none) (Slaves: 16) Channel 47: MTP2 (Default) (Echo Canceler: none) (Slaves: 47) Channel 78: MTP2 (Default) (Echo Canceler: none) (Slaves: 78) Channel 109: MTP2 (Default) (Echo Canceler: none) (Slaves: 109) Channel 140: MTP2 (Default) (Echo Canceler: none) (Slaves: 140) Channel 171: MTP2 (Default) (Echo Canceler: none) (Slaves: 171) Channel 202: MTP2 (Default) (Echo Canceler: none) (Slaves: 202) Channel 233: MTP2 (Default) (Echo Canceler: none) (Slaves: 233) Sets up 248 channels to configure. This may help. -- regards, abdul basit On Tue, Mar 27, 2012 at 6:01 PM, Kaloyan Kovachev <kkovachev at varna.net>wrote: > On Tue, 27 Mar 2012 17:35:34 +0500, Abdul Basit <basit.engg at gmail.com> > wrote: > > yap. > > here is my system.conf: > > > > # > > # Global data > > > > loadzone = us > > defaultzone = us > > > > # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS > > span=1,1,0,ccs,hdb3 > > bchan=1-15,17-31 > > mtp2=16 > > echocanceller=mg2,1-15,17-31 > > > > # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS > > span=2,2,0,ccs,hdb3 > > bchan=32-46,48-62 > > mtp2=47 > > echocanceller=mg2,32-46,48-62 > > > > # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" HDB3/CCS > > span=3,3,0,ccs,hdb3 > > bchan=63-77,79-93 > > mtp2=78 > > echocanceller=mg2,63-77,79-93 > > > > # Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" HDB3/CCS > > span=4,4,0,ccs,hdb3 > > bchan=94-108,110-124 > > mtp2=109 > > echocanceller=mg2,94-108,110-124 > > > > # Span 5: TE4/1/1 "T4XXP (PCI) Card 1 Span 1" HDB3/CCS > > span=5,5,0,ccs,hdb3 > > bchan=125-139,141-155 > > mtp2=140 > > echocanceller=mg2,125-139,141-155 > > > > # Span 6: TE4/1/2 "T4XXP (PCI) Card 1 Span 2" HDB3/CCS > > span=6,6,0,ccs,hdb3 > > bchan=156-170,172-186 > > mtp2=171 > > echocanceller=mg2,156-170,172-186 > > > > # Span 7: TE4/1/3 "T4XXP (PCI) Card 1 Span 3" HDB3/CCS > > span=7,7,0,ccs,hdb3 > > bchan=187-201,203-217 > > mtp2=202 > > echocanceller=mg2,187-201,203-217 > > > > # Span 8: TE4/1/4 "T4XXP (PCI) Card 1 Span 4" HDB3/CCS > > span=8,8,0,ccs,hdb3 > > bchan=218-232,234-248 > > mtp2=233 > > echocanceller=mg2,218-232,234-248 > > > > -- > > regards, > > > > abdul basit > > > > > > On Tue, Mar 27, 2012 at 12:46 PM, Kaloyan Kovachev > > <kkovachev at varna.net>wrote: > > > >> Hi, > >> > >> On Mon, 26 Mar 2012 20:18:48 +0500, Abdul Basit <basit.engg at gmail.com> > >> wrote: > >> > I recompiled libss7 and asterisk with > >> > > >> > libss7-1.0.2/ss7_internal.h:#define SS7_MAX_LINKS 16 > >> > > >> > asterisk-1.6.2.10/channels/chan_dahdi.c:#define NUM_DCHANS 16 > >> > > >> > But as soon as i add 5th link, i get error > >> > > >> > Command 'module load chan_dahdi.so' failed. > >> > [Mar 21 16:25:28] ERROR[10641]: chan_dahdi.c:15568 > linkset_addsigchan: > >> > Unable to open SS7 sigchan 140 (No such device or address) > >> > > sigchan 140 is not found at all, which is outside of asterisk/libss7, but > dahdi does not place such limits (1024 is far more than 16) > > what does dahdi_cfg -vvt say? Do you see channel 140 being configured? > > >> have you (re)defined it in system.conf or it is still commented out? > >> > >> > > >> > While with 4 signalling links its perfect. > >> > > >> > [Mar 21 16:46:05] Loaded chan_dahdi.so => (DAHDI Telephony Driver > >> w/SS7) > >> > *CLI> [Mar 21 16:46:05] MTP2 link up (SLC 0) > >> > [Mar 21 16:46:05] MTP2 link up (SLC 1) > >> > [Mar 21 16:46:05] --- SS7 Up --- > >> > [Mar 21 16:46:05] Resetting CICs 1 to 15 > >> > [Mar 21 16:46:05] Resetting CICs 17 to 31 > >> > [Mar 21 16:46:05] Resetting CICs 33 to 47 > >> > [Mar 21 16:46:05] Resetting CICs 49 to 63 > >> > [Mar 21 16:46:05] Resetting CICs 65 to 79 > >> > [Mar 21 16:46:05] Resetting CICs 81 to 95 > >> > [Mar 21 16:46:05] Resetting CICs 97 to 111 > >> > [Mar 21 16:46:05] Resetting CICs 113 to 127 > >> > [Mar 21 16:46:05] Resetting CICs 129 to 143 > >> > [Mar 21 16:46:05] Resetting CICs 145 to 159 > >> > [Mar 21 16:46:05] Resetting CICs 161 to 175 > >> > [Mar 21 16:46:05] Resetting CICs 177 to 191 > >> > [Mar 21 16:46:05] Resetting CICs 193 to 207 > >> > [Mar 21 16:46:05] Resetting CICs 209 to 223 > >> > [Mar 21 16:46:05] Resetting CICs 225 to 239 > >> > [Mar 21 16:46:05] Resetting CICs 241 to 255 > >> > [Mar 21 16:46:06] MTP2 link up (SLC 3) > >> > [Mar 21 16:46:06] MTP2 link up (SLC 2) > >> > > >> > Checking with my provider. Will update after coordination. > >> > > >> > -- > >> > > >> > regards, > >> > > >> > Abdul Basit > >> > > >> > > >> > > >> > On Mon, Mar 19, 2012 at 12:16 AM, Kaloyan Kovachev > >> > <kkovachev at varna.net>wrote: > >> > > >> >> Not sure about SIG_SS7_NUM_DCHANS, but i am using SS7_MAX_LINKS and > >> >> SS7_MAX_ADJSPS = 8 (with 6 links actually) for over 3 years without > a > >> >> problem and as the max SLC is 4 bit it seems right to have 16 as the > >> >> hardcodded maximum > >> >> > >> >> On Sun, 18 Mar 2012 22:54:20 +0500, Abdul Basit > <basit.engg at gmail.com> > >> >> wrote: > >> >> > Kaloyan, > >> >> > > >> >> > Thank you for suggestion. > >> >> > I will update and recompile asterisk. Will get back with results. > >> >> > > >> >> > -- > >> >> > regards, > >> >> > > >> >> > Abdul Basit > >> >> > > >> >> > > >> >> > > >> >> > On Sat, Mar 17, 2012 at 12:47 PM, Kaloyan Kovachev > >> >> > <kkovachev at varna.net>wrote: > >> >> > > >> >> >> On Fri, 16 Mar 2012 23:25:40 +0500, Abdul Basit > >> <basit.engg at gmail.com> > >> >> >> wrote: > >> >> >> > This is production machine. I found it as stable one and > working > >> >> >> > fine > >> >> >> with > >> >> >> > me. > >> >> >> > Moreover, I tested with latest asterisk 1.6.2.23 but this is > not > >> >> >> > solving > >> >> >> > slc problem. > >> >> >> > > >> >> >> > If someone has better idea/suggestion thanks in advance. > >> >> >> > >> >> >> There are few hardcoded limits: > >> >> >> in libss7 > >> >> >> ss7_internal.h SS7_MAX_LINKS 4 > >> >> >> ss7_internal.h SS7_MAX_ADJSPS 4 > >> >> >> > >> >> >> in Asterisk 1.8 and up to trunk > >> >> >> sig_ss7.h SIG_SS7_MAX_CHANNELS 672 (which is 1 DS3 = 28 > T1 > >> or > >> >> >> about 22 E1) > >> >> >> which is equal to MAX_CHANNELS in older versions > >> >> >> sig_ss7.h SIG_SS7_NUM_DCHANS 4 (in older versions is > >> just > >> >> >> NUM_DCHANS) > >> >> >> > >> >> >> also NUM_SPANS = 32 unless you have compiled asterisk with the > >> >> >> 'lots > >> >> >> of > >> >> >> spans' option in which case it is 128 > >> >> >> > >> >> >> in short upgrading will not solve your problem - you should > change > >> the > >> >> >> hardcoded value and recompile. > >> >> >> In my opinion it is safe to increase them all from 4 to 16 > (links, > >> >> adjspc > >> >> >> and dchans) > >> >> >> > >> >> >> > > >> >> >> > -- > >> >> >> > regards, > >> >> >> > > >> >> >> > Abdul Basit > >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> > On Fri, Mar 16, 2012 at 8:54 PM, Kevin P. Fleming > >> >> >> > <kpfleming at digium.com>wrote: > >> >> >> > > >> >> >> >> On 03/16/2012 08:52 AM, Abdul Basit wrote: > >> >> >> >> > >> >> >> >>> While browsing through the code in > >> >> >> >>> > >> >> >> >>> asterisk-1.6.2.10/channels/**chan_dahdi.c > >> >> >> >>> > >> >> >> >> > >> >> >> >> Why are you using such an old version of Asterisk? > >> >> >> >> > >> >> >> >> -- > >> >> >> >> Kevin P. Fleming > >> >> >> >> Digium, Inc. | Director of Software Technologies > >> >> >> >> Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | > Skype: > >> >> >> >> kpfleming > >> >> >> >> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > >> >> >> >> Check us out at www.digium.com & www.asterisk.org > >> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120327/65b14677/attachment.htm>
|