Same ANI and DNI while sending IAM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 14, 2011 at 8:45 AM, Marek Cervenka <cervajs at fpf.slu.cz> wrote:

> On 10/12/2011 10:47 PM, caio wrote:
> > Hello,
> >
> > I have the following issue when calling from a sip endpoint to a pstn
> > number.
> >
> > i don't know why the chan_ss7 is taking same values for called and
> > calling party numbers. See below:
> >
> >      -- Sent IAM CIC=30   ANI=202120 DNI=202110 RNI=
> >
> > The ss7 capture/dump shows isup with theses values as well.
> > However, SIP packet is right (correct from/to, etc headers). Then, the
> > call is returned with congestion tone.
> >
> > If I set the CALLERID(num) with the wanted number, the result is the
> same.
> >
>
> change in l4isup.c
>
> ALL "caller.id" to "connected.id"
>
>
Thank you, it works.
Is it a bug in using the wrong variable in chan_ss7 or an issue in asterisk?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20111014/3e54813a/attachment.htm>


[Index of Archives]     [Asterisk App Development]     [PJ SIP]     [Gnu Gatekeeper]     [IETF Sipping]     [Info Cyrus]     [ALSA User]     [Fedora Linux Users]     [Linux SCTP]     [DCCP]     [Gimp]     [Yosemite Backpacking]     [Deep Creek Hot Springs]     [Yosemite Campsites]     [ISDN Cause Codes]     [Asterisk Books]

  Powered by Linux