Hi, there is no such thing like N with SS7 - 0123456789ABCD*# are the possible options with '*' = 'e' and '#' = 'f' On Fri, 11 Nov 2011 11:43:54 -0300, "Germ?n I. Paul" <gpaul at g-com.com.ar> wrote: > Hi. > Can someone of you tellme how can I add an N at the end of the dialed > extension using libss7? > I`ve tried adding it on the dialplan, asterisk execute that OK, but when I > debug the linkset, on called party signal it doesen`t appears. > I say, if I dial 02322674501, on the called party signal should appear > 02322674501N. > I`m connected to a Siemens EWSD. > Thank you for your atention and sorry for my poor english > > Regards > German > > > From: bipin singh > Sent: Wednesday, November 02, 2011 12:32 AM > To: asterisk-ss7 at lists.digium.com > Subject: Re: [asterisk-ss7] CIC isn't same of Telco > > > Hi, > In this case sigchan=16 on both ss7 link and working . > > On Tue, Nov 1, 2011 at 6:11 PM, Rodrigo Ricardo Passos > <rodrigopassos at gmail.com> wrote: > > > Hi bipin. > Thanks for your return. > The problem is because the cicbeginswith initialize with 32 and need to > be 1 in range of 32 up to 62. The correlated CIC in the telco switch is 1 > and not 32. > > Em 01/11/2011 02:38, bipin singh escreveu: > Hi , > Try This if your dahdi_tool show ok working on same APC > and DCP, > > > > [trunkgroups] > > > [channels] > group=1 > context=outbound > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=no > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > faxdetect=both > > > callprogress=no > progzone=in > pulsedial=yes > ;busydetect=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.5 > txgain=0.5 > callgroup=1 > pickupgroup=1 > > > signalling=ss7 > ss7type=itu > linkset=1 > networkindicator=national > pointcode=xxxxx > defaultdpc=xxxxx > group=1 > adjpointcode=xxxx > mtp2=16 > sigchan=16 > cicbeginswith=1 > channel=1-15 > cicbeginswith=17 > channel=17-31 > > > group=2 > cicbeginswith=32 > channel=32-46,48-62 > > > On Tue, Nov 1, 2011 at 4:43 AM, Rodrigo Ricardo Passos > <rodrigopassos at gmail.com> wrote: > > Hi all, > > I have the following scenario: > > The telco company uses 4 different Softswitchs to compose my SS7 > interconnection, so 4 E1s to have redundancy. Each this one uses > channels 1 up to 31. The map of the firsts is equal the ID of the > asterisk channels, but the next ID?s isn't the same and the signaling > doesn't work. The telco cannot change the CIC configuration to have > the same CIC in my configuration. I have one TE405P. The only way to > solve this problem is change the CIC in the telco company or i can > change CIC maps in my asterisk box? Only the first E1 align with the > first softswitch. When I a place a call using channel 64 of my third > E1, telco doesn't have CIC 64, but have CIC 2 and the cannot be > complete because the CIC isn't the same. What is the solution? > > First E1: Asterisk: 1 - 31 (16 signaling) - Alcatel: S12_01 1-31 > (16 signaling) > Second E1 Asterisk: 32 - 62 (no signaling - voice only) - Alcatel: > S12_02 1 - 31 > Third E1: Asterisk: 63 - 93 (no signaling - voice only) - NEC: > NEAX_01 1 - 31 > Fourth E1: Asterisk: 94 - 124 (16 signaling) - NEC: NEAX_02 1 - 31 > > All dpcs are different; each this one have an unique ID for each E1, > only problem is the signaling. > My configurations are: > > system.conf: > span=1,1,0,ccs,hdb3 > # termtype: unknown > bchan=1-15,17-31 > mtp2=16 > > # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS > span=2,1,0,ccs,hdb3 > # termtype: unknown > bchan=32-62 > > # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" HDB3/CCS > span=3,1,0,ccs,hdb3 > # termtype: unknown > bchan=63-93 > > # Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" HDB3/CCS > span=4,1,0,ccs,hdb3 > # termtype: unknown > bchan=94-107,110-124 > mtp2=108 > > # Global data > > loadzone = us > defaultzone = us > > > chan_dahdi.conf: > > [trunkgroups] > > [channels] > context=interconexoes > ss7type=itu > signalling=ss7 > ss7_called_nai=dynamic > ss7_calling_nai=dynamic > networkindicator=national > echotraining=yes > echotraining=800 > echocancel=yes > > group=1 > > linkset=1 > pointcode=100 > defaultdpc=80 > adjpointcode=80 > > cicbeginswith=1 > channel=1-15 > cicbeginswith=17 > channel=17-31 > sigchan=16 > > cicbeginswith=32 > channel=32-62 > > pointcode=100 > defaultdpc=90 > adjpointcode=90 > > cicbeginswith=63 > channel=63-93 > > cicbeginswith=94 > channel=94-107 > cicbeginswith=110 > channel=110-124 > sigchan=108 > > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > > > -- > BIPIN RAGHUVANSHI > OPERATION HEAD > ASTERISK (DEVELOPMENT AND RESEARCH) > WWW.EHORIZONS.IN > 011-32323262 > 011-46334633 > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > > > -- > BIPIN RAGHUVANSHI > OPERATION HEAD > ASTERISK (DEVELOPMENT AND RESEARCH) > WWW.EHORIZONS.IN > 011-32323262 > 011-46334633 > > > > -------------------------------------------------------------------------------- > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|