2011/6/28 Robert Thomas <thomcr at gmail.com> > > TE410P > Times 2 :) you have two of those. > > Load is never above the 0.5 out of 24 available. > > It's not that simple. It's not cpu power that counts, but, mostly the latency. > Asterisk takes like 130% of CPU time. > > Not a good sign ! > About interrupts I'll check that during load hours. This is a test run > running right now. > > root at ostional:~# cat /proc/interrupts > 1856235 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3, > uhci_hcd:usb8, pata_it8213, wct4xxp > So, if i read this correctly, you share your wct4xxp IRQ with some hdd controller and usb? Try to move all of the traffic to another one wct4xpp card, and try to put this card with shared interrupts temporarily out of the box. Also: might be a good idea to disable software echo canceling. Note: i've have got very similar issues some years ago, but it was (that was suggested by Digium) a reason of using a clone card, not orginal Digium's. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20110628/9cfccb0b/attachment.htm>
|