Patch against which version of Asterisk n Libss7?
Mitul
Gustavo M?rsico <gustavomarsico at gmail.com> wrote:
>Hope this helps.
>
>--- chan_dahdi.c
>+++ chan_dahdi.c
>@@ -381,6 +381,7 @@
> static int cur_adjpointcode = -1;
> static int cur_networkindicator = -1;
> static int cur_defaultdpc = -1;
>+static int cur_slc = -1;
> #endif /* HAVE_SS7 */
>
> #ifdef HAVE_PRI
>@@ -13948,6 +13949,11 @@
> return -1;
> } else
> ss7_set_pc(link->ss7, cur_pointcode);
>+
>+ if (cur_slc < 0) {
>+ ast_log(LOG_ERROR, "Unspecified SLC!\n");
>+ return -1;
>+ }
>
> if (sigchan < 0) {
> ast_log(LOG_ERROR, "Invalid sigchan!\n");
>@@ -13993,9 +13999,9 @@
> }
>
> if (p.sigtype == DAHDI_SIG_MTP2)
>- ss7_add_link(link->ss7, SS7_TRANSPORT_DAHDIMTP2, link->fds[curfd]);
>+ ss7_add_link(link->ss7, SS7_TRANSPORT_DAHDIMTP2, link->fds[curfd], cur_slc);
> else
>- ss7_add_link(link->ss7, SS7_TRANSPORT_DAHDIDCHAN, link->fds[curfd]);
>+ ss7_add_link(link->ss7, SS7_TRANSPORT_DAHDIDCHAN, link->fds[curfd], cur_slc);
>
> link->numsigchans++;
>
>@@ -16086,6 +16092,8 @@
> if (res < 0)
> return -1;
>
>+ } else if (!strcasecmp(v->name, "slc")) {
>+ cur_slc = atoi(v->value);
> } else if (!strcasecmp(v->name, "ss7_explicitacm")) {
> struct dahdi_ss7 *link;
> link = ss7_resolve_linkset(cur_linkset);
>
>
>
>
>On Jan 10, 2011, at 9:50 PM, mitul at enterux.com wrote:
>
>> Dear Gustavo,
>>
>> I would appreciate if you can point me to this patch.
>>
>> Regards,
>> Mitul Limbani
>> Enterux Solutions
>>
>>
>> Gustavo M?rsico <gustavomarsico at gmail.com> wrote:
>>
>>> Not in the release, but there is a patch to do it.
>>>
>>>
>>> On Jan 10, 2011, at 5:38 PM, mitul at enterux.com wrote:
>>>
>>>> Just a question running my mind does Digium LIBSS7 have SLC= parameter that it reads from chan_dahdi.conf coz it does show me some warnings, undefined parameter I load or reload dahdi within asterisk.
>>>>
>>>> Any one - Matt, can you give us an update if such varaible can be defined using std configuration.
>>>>
>>>> Regards,
>>>> Mitul Limbani
>>>>
>>>>
>>>> Wasim Baig <wasim at convergence.pk> wrote:
>>>>
>>>>> On Sun, Jan 9, 2011 at 23:18, Benaiad <benaiad at gmail.com> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> ;First of all, I'm newbie in this field, so please forgive
>>>>>> my unprofessional explanation.
>>>>>>
>>>>>
>>>>>> I'm trying to connect to a mobile operator with chan_ss7 using sangoma
>>>>>> card.
>>>>>> the telecom regulator initiated an SPC code for us
>>>>>> Now, the operator's engineer asked me for the following parameters:
>>>>>> OPC , Link type , TS , SLC.
>>>>>>
>>>>>
>>>>> Ideally, they should give a Point Code for you as well, if they don't, you
>>>>> can choose any
>>>>> arbitrary figure like "1234" or "1" or "69".
>>>>>
>>>>>
>>>>>> but I don't know what should I provide to him.
>>>>>> I think the OPC similar to our SPC, And the Link type is 64k,
>>>>>> But for TS and SLC, I don't know what to say.
>>>>>>
>>>>>
>>>>> TS is the timeslot/chan on which you will send signalling. On each E1 you
>>>>> have 31 TS.
>>>>> Normally 16 is used, although you can use any 1 to 31.
>>>>>
>>>>> Use SLC=0 for the first link.
>>>>>
>>>>>
>>>>>>
>>>>>> I appreciate and applaud your help and concern.
>>>>>>
>>>>>> Thank you all.
>>>>>>
>>>>>> Regards,
>>>>>> --
>>>>>> Benaiad
>>>>>>
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>>
>>>>>> asterisk-ss7 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 |
>>>>> peace be upon you ...
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-ss7 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-ss7 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>--
>_____________________________________________________________________
>-- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>asterisk-ss7 mailing list
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
|