There is no * / # in SS7 because the digits are hexa. If I remember correctly * is B, in your case B510. On Aug 18, 2011, at 8:09 PM, Luis Marcelo wrote: > Hi all, > Our telco is passing us calls to *510. We crafted our dial plan as follows: > > exten => *510,1,Agi(agi://localhost/myAgi) > exten => _*510,1,Agi(agi://localhost/myAgi) > exten => b510,1,Agi(agi://localhost/myAgi) > exten => _b510,1,Agi(agi://localhost/myAgi) > exten => _*5X,1,Agi(agi://localhost/myAgi) > exten => _*5XX,1,Agi(agi://localhost/myAgi) > exten => _*510X,1,Agi(agi://localhost/myAgi) > exten => _*510XX,1,Agi(agi://localhost/myAgi) > > None of them worked, Asterisk didn't execute the ago script > > After that I enabled libss7 debug and compared two calls (the one to *510 and another to 0000 which does produce a match in another section of our dialplan) > > This is the call to *510: > > Len = 54 [ 92 de 33 85 cb 0b 30 a2 7f 00 01 10 20 01 0a 00 02 07 05 83 10 5b 01 0f 0a 08 84 11 95 71 10 00 40 04 03 04 7d 02 91 81 1d 03 80 90 a3 31 02 00 5a 39 02 31 c0 00 ] > FSN: 94 FIB 1 > BSN: 18 BIB 1 > <[0] MSU > [ 92 de 33 ] > Network Indicator: 2 Priority: 0 User Part: ISUP (5) > [ 85 ] > OPC 2240 DPC 3019 SLS 10 > [ cb 0b 30 a2 ] > CIC: 127 > [ 7f 00 ] > Message Type: IAM > [ 01 ] > --FIXED LENGTH PARMS[4]-- > Nature of Connection Indicator: > Satellites in connection: 0 > Continuity Check: Check not required (0) > Outgoing half echo control device: included (1) > [ 10 ] > Forward Call Indicators: > Nat/Intl Call Ind: call to be treated as a national call (0) > End to End Method Ind: no end-to-end method(s) available (0) > Interworking Ind: no interworking encountered (0) > End to End Info Ind: no end-to-end information available (0) > ISDN User Part Ind: ISDN user part used all the way (1) > ISDN User Part Pref Ind: ISDN user part preferred all the way (0) > ISDN Access Ind: originating access ISDN (1) > SCCP Method Ind: no indication (0) > [ 20 01 ] > Calling Party's Category: > Category: Ordinary calling subscriber (10) > [ 0a ] > Transmission Medium Requirements: > Speech (0) > [ 00 ] > --VARIABLE LENGTH PARMS[1]-- > Called Party Number: > Nature of address: 3 > NI: 0 > Numbering plan: 1 > Address signals: > [ 05 83 10 5b 01 0f ] > --OPTIONAL PARMS-- > Calling Party Number: > Nature of address: 4 > NI: 0 > Numbering plan: 1 > Presentation: 0 > Screening: 1 > Address signals: 59170100044 > [ 0a 08 84 11 95 71 10 00 40 04 ] > Access Transport: > [ 03 04 7d 02 91 81 ] > User Service Information: > [ 1d 03 80 90 a3 ] > Propagation Delay Counter: > Delay: 0ms > [ 31 02 00 5a ] > Parameter Compatibility Information: > [ 39 02 31 c0 ] > > > this is the call to 0000 > > Len = 54 [ 90 dd 33 85 cb 0b 30 32 7a 00 01 10 20 01 0a 00 02 07 05 83 10 00 00 0f 0a 08 84 11 95 71 60 24 60 09 03 04 7d 02 91 81 1d 03 80 90 a3 31 02 00 5a 39 02 31 c0 00 ] > FSN: 93 FIB 1 > BSN: 16 BIB 1 > <[0] MSU > [ 90 dd 33 ] > Network Indicator: 2 Priority: 0 User Part: ISUP (5) > [ 85 ] > OPC 2240 DPC 3019 SLS 3 > [ cb 0b 30 32 ] > CIC: 122 > [ 7a 00 ] > Message Type: IAM > [ 01 ] > --FIXED LENGTH PARMS[4]-- > Nature of Connection Indicator: > Satellites in connection: 0 > Continuity Check: Check not required (0) > Outgoing half echo control device: included (1) > [ 10 ] > Forward Call Indicators: > Nat/Intl Call Ind: call to be treated as a national call (0) > End to End Method Ind: no end-to-end method(s) available (0) > Interworking Ind: no interworking encountered (0) > End to End Info Ind: no end-to-end information available (0) > ISDN User Part Ind: ISDN user part used all the way (1) > ISDN User Part Pref Ind: ISDN user part preferred all the way (0) > ISDN Access Ind: originating access ISDN (1) > SCCP Method Ind: no indication (0) > [ 20 01 ] > Calling Party's Category: > Category: Ordinary calling subscriber (10) > [ 0a ] > Transmission Medium Requirements: > Speech (0) > [ 00 ] > --VARIABLE LENGTH PARMS[1]-- > Called Party Number: > Nature of address: 3 > NI: 0 > Numbering plan: 1 > Address signals: 0000# > [ 05 83 10 00 00 0f ] > --OPTIONAL PARMS-- > Calling Party Number: > Nature of address: 4 > NI: 0 > Numbering plan: 1 > Presentation: 0 > Screening: 1 > Address signals: 59170642069 > [ 0a 08 84 11 95 71 60 24 60 09 ] > Access Transport: > [ 03 04 7d 02 91 81 ] > User Service Information: > [ 1d 03 80 90 a3 ] > Propagation Delay Counter: > Delay: 0ms > [ 31 02 00 5a ] > Parameter Compatibility Information: > [ 39 02 31 c0 ] > > > It seems as if the debugger is not decoding the address digits in the first case (*510). I was wondering how do I go about writing an extension that matches this digits "" , or how can I confirm what digits are actually being passed to the dial plan > > My box: > asterisk-1.6.0.1 > dahdi-linux-2.0.0 > libss7-1.0.1 > > thanks in advance. > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|