check if your chan_dahdi.c supports setting slc at all. It should be in function process_dahdi just after ss7type On Thu, 2 Sep 2010 07:37:05 -0500, Stephan Ellis <stephan.ellis at gmail.com> wrote: > I am not sure about the difference of what Bipin sent, except for the > order > and apparent removal of directives. I tried changing the order of the > directives in chan_dahdi.conf, but it had no effect. It still flaps and > says SLC (0) > > Any other ideas? > > thanks! > -stephan > > On Thu, Sep 2, 2010 at 1:36 AM, bipin singh > <bipinraghuvanshi at gmail.com>wrote: > >> Try this >> linkset=1 >> pointcode=1-1-1 >> adjpointcode=5-9-192 >> defaultdpc=5-9-192 >> sigchan=1 >> cicbeginswith=1 >> channel=2-24 >> >> On Thu, Sep 2, 2010 at 2:27 AM, Stephan Ellis >> <stephan.ellis at gmail.com>wrote: >> >>> Hell All, >>> >>> I am using: >>> Asterisk 1.6.2.10 >>> Libss7 1.0.2 >>> Latest DAHDI and Wanpipe from Sangoma >>> >>> I two T1's from the Siemens each with an F link connected to two >>> different >>> T1. Our Siemens guy is telling us that we need to set the Link Code on >>> the >>> second box to 1. I set slc=1 in chan_dahdi.conf on the second box, but >>> it >>> doesn't seem to make a difference, the link just keeps flapping: >>> >>> [Sep 1 15:49:16] WARNING[18441]: chan_dahdi.c:11640 ss7_linkset: MTP2 >>> link down (SLC 0) >>> MTP2 link up (SLC 0) >>> >>> Looks to me like slc setting in chan_dahdi.conf is ignored. Any Ideas? >>> >>> -stephan >>> >>> Here is my dahdi system.conf: >>> >>> loadzone=us >>> defaultzone=us >>> >>> #Sangoma A104 port 1 [slot:4 bus:3 span:1] <wanpipe1> >>> span=1,1,0,esf,b8zs >>> bchan=2-24 >>> mtp2=1 >>> echocanceller=mg2,2-24 >>> >>> >>> And here is chan_dahdi.conf: >>> >>> [trunkgroups] >>> >>> [channels] >>> context=default >>> usecallerid=yes >>> hidecallerid=no >>> callwaiting=yes >>> usecallingpres=yes >>> callwaitingcallerid=yes >>> threewaycalling=yes >>> transfer=yes >>> canpark=yes >>> cancallforward=yes >>> callreturn=yes >>> relaxdtmf=yes >>> rxgain=0.0 >>> txgain=0.0 >>> group=1 >>> callgroup=1 >>> pickupgroup=1 >>> immediate=no >>> >>> ;Sangoma A104 port 2 [slot:4 bus:3 span:1] <wanpipe1> >>> switchtype=national >>> context=from-pstn >>> group=0 >>> echocancel=yes >>> >>> signaling=ss7 >>> ss7type=ansi >>> ss7_called_nai=dynamic >>> ss7_calling_nai=dynamic >>> ss7_internationalprefix=00 >>> ss7_nationalprefix=0 >>> ss7_subscriberprefix= >>> ss7_unknownprefix= >>> ss7_explictacm=yes >>> pointcode=1-1-1 >>> adjpointcode=5-9-192 >>> defaultdpc=5-9-192 >>> networkindicator=national ;NI value for MTP3 >>> linkset=1 >>> slc=1 >>> sigchan=1 >>> cicbeginswith=1 >>> channel=2-24 >>> >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-ss7 mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>> >> >> >> >> -- >> BIPIN RAGHUVANSHI >> OPERATION HEAD >> ASTERISK (DEVELOPMENT AND RESEARCH) >> WWW.EHORIZONS.IN >> 011-32323262 >> 011-46334633 >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>
|