I have a project in which I need to do the following - Install two trixbox server with Sangoma A101 card in each server and connect them to two E1 ports on a Qualcomm BSCI hardware. The link protocol is SS7 ISUP. The objective is to receive successfully incoming calls and CLIs from the E1s and rout the call to a SIP gateway. I've been researching on this forum, Digium's SS7 mailing list and various forums but it not making things clearer for me. Trixbox 2.8.0.3 has libss7 and I've downloaded the latest wanpipe driver from Sangoma. When I install the wanpipe driver, do I configure it for PRI, SS7 or SS7+TDM? I have come to a stage where I've tried a couple of options and running out of time. I just wonder if there is anyone out there who has done something similar before and could probably point me to the right direction. Thanks. Best Regards, Geoffrey Yeoh Gelxis Communications Ltd. This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Gelxis Communications Ltd. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100524/17f5afc6/attachment.htm
|