hi, disconnect your telco, connect loop cable to E1 port, and look debug! OPC - this is your point code! Deepika Nijhawan wrote: > > Hi, > > > > Please find it below: > > > > 1. > > asterisk4*CLI> dahdi show status > > Description Alarms IRQ bpviol CRC4 > Fra Codi Options LBO > > T4XXP (PCI) Card 0 Span 1 OK 0 0 0 > CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) > > T4XXP (PCI) Card 0 Span 2 OK 0 0 0 > CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) > > T4XXP (PCI) Card 0 Span 3 OK 0 0 0 > CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) > > T4XXP (PCI) Card 0 Span 4 OK 0 0 0 > CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) > > T4XXP (PCI) Card 1 Span 1 OK 0 0 0 > CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) > > T4XXP (PCI) Card 1 Span 2 OK 0 0 0 > CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) > > T4XXP (PCI) Card 1 Span 3 OK 0 0 0 > CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) > > T4XXP (PCI) Card 1 Span 4 OK 0 0 0 > CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) > > > > 2. > > asterisk4*CLI> ss7 set debug off linkset 1 > > Enabled debugging on linkset 1 > > asterisk4*CLI> > > Link state change: NOTALIGNED -> IDLE > > Link state change: IDLE -> NOTALIGNED > > > > 3. > > Adjacent and default point codes are Telsis point codes and they are > correct. What do you mean by OPC ? > > > > And this link was working before with ISDN setup correctly, so cabling > is correct. > > > > > > > > --- > > > > Kind Regards, > > > > *Deepika Nijhawan* > > *VoIP Engineer* > > * * > > *Oxygen8* Communications > > *T:* +44(0) 871 434 9151 > > +44(0) 121 620 9151 > > *Email:* deepika.nijhawan at oxygen8.com > > *Skype:* deepika-nijhawan > > *W:* www.oxygen8.com <http://www.oxygen8.com/> > > > > > > This communication contains information which is confidential and may > also be privileged. It is for the exclusive use of the intended > recipient/s. If you are not the intended recipient/s please note that > any distribution, copying or use of this communication or the > information in it is strictly prohibited. If you have received this > communication in error please notify us by email or by telephone > (08082060808) and then delete the email and any copies of it. This > communication is from Oxygen8 Communications UK Ltd - Company Number > 03383285. Registered Address; 12th Floor, Lyndon House, 58-62 Hagley > Road, Birmingham, B16 8PE. VAT Registration Number: 792 4494 89 > > > > >
|