Brrrrrrrr, why, why , why is networkrouted wneh i set subscriberprefix?????
Now my conf is this:
ss7-mtel-fix*CLI> ss7 show linkset 3
SS7 flags: 0x0LI>
SS7 linkset 3 status: Up
SS7 calling nai: 3
SS7 called nai: -1
SS7 nationalprefix: 0
SS7 internationalprefix: 00
SS7 unknownprefix:
SS7 networkroutedprefix:
SS7 subscriberprefix: 112
Switch type: ITU
Our point code: 5176
SLS shift: 0
numlinks: 1
numsps: 1
---------------------------------
Adjecent SP PC: 121 STATE: UP
TRA: GOT SENT T19: not running T21: not running
Routes:
DPC State T6 T10
Link SLC: 0 NetMngSLS: 0
State: INSERVICE, UP
STD Test: passed
Got, sent :
Inhibit:
Changeover: NO
Tx buffer: 0
Tx queue: 0
Retrans pos 0
CO buffer: 0
CB buffer: 0
Last FSN: 4
MTP3timers:
ss7-mtel-fix*CLI>
chan-dahdi.conf
language=en
context=blablabla
switchtype=euroisdn
usecallerid=yes
callwaiting=yes
usecallingpres=yes
signalling=ss7
group=3
ss7type = itu
ss7_explicitacm=yes
ss7_autoacm=yes
ss7_called_nai=dynamic
ss7_calling_nai=national
ss7_internationalprefix=00
ss7_nationalprefix=0
ss7_subscriberprefix=112
linkset = 3
pointcode = 5176
adjpointcode = 121
defaultdpc = 118
networkindicator=national
cicbeginswith = 1
channel = 63-77
cicbeginswith = 17
channel = 79-93
sigchan = 78
isup_timer.digittimeout = 500
and now dialing:......
-- Goto (emergency,112,3)
-- Executing [112 at emergency:3] Dial("SIP/52461234-00000001", "DAHDI/g3/112,30") in new stack
-- Called g3/112
Len = 32 [ 87 89 1d 85 76 00 0e 15 01 00 01 00 60 01 0a 00 02 06 04 08 10 11 f2 0a 06 03 10 25 64 21 43 00 ]
FSN: 9 FIB 1
BSN: 7 BIB 1
>[0] MSU
[ 87 89 1d ]
Network Indicator: 2 Priority: 0 User Part: ISUP (5)
[ 85 ]
OPC 5176 DPC 118 SLS 1
[ 76 00 0e 15 ]
CIC: 1
[ 01 00 ]
Message Type: IAM
[ 01 ]
--FIXED LENGTH PARMS[4]--
Nature of Connection Indicator:
Satellites in connection: 0
Continuity Check: Check not required (0)
Outgoing half echo control device: not included (0)
[ 00 ]
Forward Call Indicators:
Nat/Intl Call Ind: call to be treated as a national call (0)
End to End Method Ind: no end-to-end method(s) available (0)
Interworking Ind: no interworking encountered (0)
End to End Info Ind: no end-to-end information available (0)
ISDN User Part Ind: ISDN user part used all the way (1)
ISDN User Part Pref Ind: ISDN user part not preferred all the way (1)
ISDN Access Ind: originating access ISDN (1)
SCCP Method Ind: no indication (0)
P-M bits(0) P: 0 O: 0 N: 0 M: 0
[ 60 01 ]
Calling Party's Category:
Category: Ordinary calling subscriber (10)
[ 0a ]
Transmission Medium Requirements:
Speech (0)
[ 00 ]
--VARIABLE LENGTH PARMS[1]--
Called Party Number:
Nature of address: 8
NI: 0
Numbering plan: 1
Address signals: 112#
[ 04 08 10 11 f2 ]
--OPTIONAL PARMS--
Calling Party Number:
Nature of address: 3
NI: 0
Numbering plan: 1
Presentation: 0
Screening: 0
ss7-mtel-fix*CLI> Address signals: 52461234
[ 0a 06 03 10 25 64 21 43 ]
Len = 16 [ 89 88 0d 85 38 94 1d 10 01 00 0c 02 00 02 82 95 ]
FSN: 8 FIB 1
BSN: 9 BIB 1
<[0] MSU
[ 89 88 0d ]
Network Indicator: 2 Priority: 0 User Part: ISUP (5)
[ 85 ]
OPC 118 DPC 5176 SLS 1
[ 38 94 1d 10 ]
CIC: 1
[ 01 00 ]
Message Type: REL
[ 0c ]
--VARIABLE LENGTH PARMS[1]--
Cause Indicator:
Coding Standard: 0
Location: 2
Cause Class: 1
Cause Subclass: 5
Cause: Call rejected (21)
[ 02 82 95 ]
-- Hungup 'DAHDI/63-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [112 at emergency:4] Hangup("SIP/52461234-00000001", "") in new stack
== Spawn extension (emergency, 112, 4) exited non-zero on 'SIP/52461234-00000001'
Len = 12 [ 88 8a 09 85 76 00 0e 15 01 00 10 00 ]
FSN: 10 FIB 1
BSN: 8 BIB 1
>[0] MSU
[ 88 8a 09 ]
Network Indicator: 2 Priority: 0 User Part: ISUP (5)
[ 85 ]
OPC 5176 DPC 118 SLS 1
[ 76 00 0e 15 ]
CIC: 1
[ 01 00 ]
Message Type: RLC
[ 10 ]
Why now NAI is "8"?????
Sat, 27 Mar 2010 22:21:42 +0100 ?????? ?? Domjan Attila <adomjan at tvnet.hu>:
> /* Nature of Address Indicator */
> #define SS7_NAI_SUBSCRIBER 0x01
> #define SS7_NAI_UNKNOWN 0x02
> #define SS7_NAI_NATIONAL 0x03
> #define SS7_NAI_INTERNATIONAL 0x04
> #define SS7_NAI_NETWORKROUTED 0x08
>
> On Sat, 2010-03-27 at 23:01 +0200, Peter Petrov wrote:
> > In this case call is going with NAI ->(8), but
> > he dialing with prefix (7), i dont know why.....:(
> >
> >
> >
> > Sat, 27 Mar 2010 21:31:53 +0100 ?????? ?? Domjan Attila <adomjan at tvnet.hu>:
> >
> > > in ael for example:
> > >
> > > 112 => {
> > > Dial(g3/07${EXTEN});
> > > };
> > >
> > > _X. => {
> > > Dial(g3/${EXTEN});
> > > };
> > >
> > > I manipulate the ${EXTEN} more complex way in my dialplan
> > >
> > > On Sat, 2010-03-27 at 22:08 +0200, Peter Petrov wrote:
> > > > hi,
> > > > when i need dial emergency number "112" from my asterisk to Telco, need send call
> > > > with NAI - Subscriber, but i dont know how need to do...
> > > >
> > > > May be i need set variable ss7_subsrcriberprefix=07 <- for example
> > > > and in dialplan i need set this:
> > > >
> > > > Dial(DAHDI/g3/07${EXTEN})
> > > >
> > > > May this is wrong..... I need set subscriber only for this call.... Please, i need help
> > > >
> > > >
> > > >
> > >
> > >
> > > ATTACHMENT: application/pgp-signature (signature.asc)
> > >
>
>
> ATTACHMENT: application/pgp-signature (signature.asc)
>
|