Hi Enrico,
1 - Incoming/Outgoing channels have their differences
2 - Use core show channel <channel id>, example: core show channel
SIP/2722228118-00000144
3 - I currently don't have any TDM spans, so I won't even try to send
you an example output
4 - Also for every call there's an incoming and an outgoing channel,
with some difference in channel attributes, you'd better look at both sides
Regards,
Marcelo
PS: I don't answer to direct e-mails
enrico mario wrote:
> Hi,
> setting "usecallingpres" to yes in chan_dahdi.conf did solve my
> problem. Now I can see the correct values for parameters in IAM
> message using my protocol analyzer: Address presentation restricted
> indicator: presentation restricted (1).
> But inside Asterisk I can still see the CallerID using the CLI command
> "core show channels verbose", is it right? I tried dumping some
> variables on the receiving box:
>
> exten => 0331,1,Answer()
> exten => 0331,n,NoOp(${CALLERID})
> exten => 0331,n,NoOp(${CALLERIDNAME})
> exten => 0331,n,NoOp(${CALLERIDNUM})
> exten => 0331,n,Playback(demo-congrats)
>
> but they are all empty (using both CALLERPRES()=prohib or allowed). Am
> I missing something?
> Thank you again!
>
> Mario
>
>
>
>
> On Thu, Mar 18, 2010 at 9:19 PM, Domjan Attila <adomjan at tvnet.hu
> <mailto:adomjan at tvnet.hu>> wrote:
>
> check this in chan_dahdi.conf:
>
> ;
> ; Whether or not to use the caller ID presentation from the Asterisk
> channel
> ; for outgoing calls.
> ; See dialplan function CALLERID(pres) for more information.
> ; Only applies to PRI and SS7 channels.
> ;
> usecallingpres=yes
> ;
>
>
> On Thu, 2010-03-18 at 20:25 +0100, enrico mario wrote:
> > Hello,
> > I cannot block CallerID with attila's libss7. I've two crossed boxes
> > with the same software version and specular configuration. I had
> some
> > checks with "core show channels verbose" inside Asterisk, and with a
> > protocol analyzer (showing Calling Party Number with Presentation
> > Allowed)
> > My setup:
> >
> >
> > [[[extensions.conf]]]
> > ...
> > exten => 03312,1,Set(CALLERPRES()=prohib)
> > exten => 03312,n,Set(CALLERPRES(num)=prohib)
> > exten => 03312,n,Set(CALLERPRES(name)=prohib)
> > exten => 03312,n,Dial(DAHDI/g1/${EXTEN})
> > ...
> >
> >
> > [[[chan_dahdi.conf]]]
> > [trunkgroups]
> >
> >
> > [channels]
> > echocancel=yes
> > echotraining=no
> > context = default
> > signalling = ss7
> > ss7type = itu
> > ss7_called_nai=dynamic
> > ss7_calling_nai=dynamic
> > usecallerid=yes
> > hidecallerid=no
> > callerid=asreceived
> > group = 1
> > linkset = 1
> > pointcode = 10
> > adjpointcode = 9
> > defaultdpc = 9
> > ...
> >
> >
> > Anyone has suggestions? Thank you!
> >
> >
> > Mario
> > --
> >
> _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
|