CICs are not channels, CICs are the logical representation of a physical channel. For that reason you don't need to have a numbering correspondence between channel number and CIC number. You can have a CIC number greater than 248. So, it should be: cicbeginswith = 1 sigchan=16 channel = 1-15 cicbeginswith = 17 channel => 17-31 cicbeginswith = 33 channel = 32-62 cicbeginswith = 65 channel = 63-93 cicbeginswith = 97 channel = 94-124 And so on... Hope this helps. Gustavo On 2 Mar 2010, at 12:29, Sriram wrote: > Dear Rasmus > > > > We have tried this too but the operator says that CIC begins with 33 and not > 32.. I will paste the CICs that the operator has given us : > > > > CIC = 1 to 31 ? 1st E1 > > CIC = 33 to 63 ? 2nd E1 > > CIC = 65 to 95 ? 3rd E1 > > CIC = 97 to 127 ? 4th E1 > > CIC = 129 to 159 ? 5th E1 > > CIC = 161 to 191 ? 6th E1 > > CIC = 193 to 223 ? 7th E1 > > CIC = 225 to 255 ? 8th E1 > > > > Also I have a doubt here I have 2 X TE420 in the Server , if I configure > anything greater than 248 in system.conf then asterisk dies ?. I really need > to get this working ASAP .. please help > > > > Thanks > > Sriram > > > > > > > > _____ > > From: Rasmus M?nna [mailto:asterisk at razu.pri.ee] > Sent: Tuesday, March 02, 2010 10:30 PM > To: Sriram > Cc: asterisk-ss7 at lists.digium.com > Subject: Re: [asterisk-ss7] 3 E1s with 1 signalling link > > > > Hi Sriram, > > If you have 3xE1 SS7 linkset with one signalling channel, then "ss7 show > linkset 2 (or 3)" should show them as not running. 1xSS7 linkset with 3xE1 > and 3xSS7 linksets are separate things. > > Still one issue that bothers me which I didn't see before. CIC configuration > is a bit wrong still: > > cicbeginswith = 1 > > sigchan=16 > > channel = 1-15 > > cicbeginswith = 17 > > channel => 17-31 > > > > cicbeginswith = 33 > > channel = 33-63 > > cicbeginswith = 65 > > channel = 65-95 > > > Correct one should be: > > cicbeginswith = 1 > > sigchan=16 > > channel = 1-15 > > cicbeginswith = 17 > > channel => 17-31 > > > > cicbeginswith = 32 > > channel = 32-62 > > cicbeginswith = 63 > > channel = 63-93 > > > Possibly this is the issue you are experiencing ? > > BR, > -- > razu > > On 03/02/2010 06:10 PM, Sriram wrote: > > Sorry Razu, I missed the mtp2 line while pasting. Its indeed there in the > system.conf file. The problem is first E1 link shows as up the rest all show > as ss7 not running if I give ss7 show linkset 1 command > > The error I get is : > > we get a RSC on Unconfigured CIC <CIC number> errors (except on 1 to 31 > CICs) > > > Also how to set "A Party" number while doing an outbound call , my operator > says I need to send the A Party number only then the call will be dialed > > Thanks sriram > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
![]() |