The matter is with the greater density of port is with the chan drivers. chan_ss7 has no issue with higher densisty of ports, but the sip driver of asterisk sometimes gets segfault. If you want to use the ast sip driver, better to look into the code and do the bug fixing for the segfault. -vashkar On Sat, Jul 31, 2010 at 1:10 AM, Nyamul Hassan <mnhassan at usa.net> wrote: > Yeah, it can be a bit daunting. > > The choice between libss7 or chan_ss7, is still a matter of debate. We had > pretty good luck with chan_ss7. Using a custom made server with quad core > Xeon processor and 4 GB of RAM, we put 8 x E1 into one machine. Best of > all, chan_ss7 supported sharing of 1 signalling link over multiple boxes. > > The order would be as follows: > > 1. Dahdi-kernel & Dahdi-tools (I used the combined download) > 2. Asterisk 1.6.x > 3. chan_ss7 1.3 or 1.4 (and copy the chan_ss7 over to the modules folder) > > Sangoma does claim to have gone as high as 32 E1s in one box. > > Regards > HASSAN > > > > > > On Sat, Jul 31, 2010 at 00:53, Nitesh Divecha <nitesh at vipernetworks.com>wrote: > >> Thanks Hassan, >> >> Yea, I have been reading the Asterisk-SS7 threads but everyone has their >> own opinion... >> >> Main question is what to use libss7 or chan_ss7? >> >> And what to install first? >> >> 1. dahdi kernel >> 2. dahdi tools >> 3. libss7 or chan_ss7 >> 4. Asterisk (1.4 or 1.6) >> >> >> Cheers, >> Nitesh >> >> >> >> Nyamul Hassan wrote: >> >>> The mailing archives have quite a few topics on this. If you're familiar >>> with Aterisk, you should be able to do it. >>> >>> In our initial attempt, we had a large stumbling block, as the telco >>> switch >>> in question was an Ericsson switch, which probably has a few SS7 >>> differences. But did come across another user who was able to work this >>> out >>> with an Ericsson switch. >>> >>> Regards >>> HASSAN >>> >>> >>> >>> On Sat, Jul 31, 2010 at 00:31, Nitesh Divecha <nitesh at vipernetworks.com >>> >wrote: >>> >>> >>> >>>> Thanks yo all... >>>> >>>> This route is for termination... Telecom is providing E1's with SS7 >>>> signaling... I have been looking around for solutions and the ready made >>>> solution like SMG box/Quintum Unified Signaling Gw/Cisco PGW2200 are >>>> very >>>> costly... >>>> >>>> I have the Digium hardware in hand just need to setup Asterisk + SS7... >>>> I'm >>>> family with Asterisk and other Digium hardware but never tried SS7. Any >>>> howto's or procedure around? >>>> >>>> Any info will be appreciated... >>>> >>>> Cheers, >>>> Nitesh >>>> >>>> >>>> >>>> >>>> >>>> >>>> Nyamul Hassan wrote: >>>> >>>> >>>> >>>>> No licenses needed for the chan_ss7 or libss7 implementations. >>>>> >>>>> Is this for origination or termination? >>>>> >>>>> Regards, >>>>> HASSAN >>>>> >>>>> >>>>> >>>>> On 2010-07-30, Nitesh Divecha <nitesh at vipernetworks.com> wrote: >>>>> >>>>> >>>>> >>>>> >>>>>> Abdul, >>>>>> >>>>>> Thanks for your info... much appreciate. >>>>>> >>>>>> Do I need to buy any licenses for SS7? Sangoma SMG requires some sort >>>>>> of >>>>>> license in order to work... Do I need licenses for Digium cards? >>>>>> >>>>>> Cheers, >>>>>> Nitesh >>>>>> >>>>>> >>>>>> Abdul Basit wrote: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> On Fri, Jul 30, 2010 at 9:15 PM, Nitesh Divecha >>>>>>> <nitesh at vipernetworks.com>wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Hello All, >>>>>>>> >>>>>>>> I'm new to SS7 and I m looking for SS7 Solution from start to end... >>>>>>>> I >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> welcome >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> got 4 x TE420 T1/E1 card and I need to setup SS7 link in remote >>>>>>>> location. Can anyone show me the right direction? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> lets setup. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> 1) Server specs. required to support two or four TE420 cards. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> So you want 8 to 16 E1s. >>>>>>> try HP DL180, Dual Quad Core Xeon, 4 GB RAM, 2x169GB SATA-II HDDs, >>>>>>> Dual >>>>>>> Power Supply. >>>>>>> This is carrier grade server machine. >>>>>>> >>>>>>> >>>>>>> 2) OS required. >>>>>>> >>>>>>> Gentoo/Centos >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> 3) Asterisk version >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> 1.6.x.x >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> 4) Right version of SS7 >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> latest version >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> 5) Any other info needed >>>>>>>> >>>>>>>> alot :) >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Thanking in advance... >>>>>>>> >>>>>>>> Cheers, >>>>>>>> Nitesh >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> _____________________________________________________________________ >>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com-- >>>>>>>> >>>>>>>> asterisk-ss7 mailing list >>>>>>>> To UNSUBSCRIBE or update options visit: >>>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> -- >>>>>> _____________________________________________________________________ >>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>>> >>>>>> asterisk-ss7 mailing list >>>>>> To UNSUBSCRIBE or update options visit: >>>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >>> >> >> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100731/43ff1c71/attachment.htm
|