On Mon, Feb 8, 2010 at 3:58 AM, vallimamod abdullah < vallimamod.abdullah at imtelecom.fr> wrote: > Thank you very much for your hint: I needed to disable all hardware > stuff (echo cancellation, dtmf and fax detection.) > I also needed to disable SLTM with sltm => no in ss7.conf > > Now my link is in service: > yay! > > *CLI> ss7 link status > linkset ls1, link l1/1 INSERVICE, sls 0, total: 4702886453502279680, > 4702886522221756416 > > But I cannot send or receive calls and I have these error messages: > > [2010-02-07 23:54:21.932] WARNING[5279]: mtp.c:1443 process_msu: Got > SLTM with unexpected sls=1, OPC=3128 DPC=3255 on 'l1/0' sls=0, state=5. > try sls=1, its wierd they are sending you sls=1 on the first link > [2010-02-07 23:54:51.126] NOTICE[5279]: l4isup.c:1334 t22_timeout: T22 > timeout (No "circuit group reset acknowledge" from peer) CIC=3. > [2010-02-07 23:55:03.340] WARNING[5279]: l4isup.c:4690 l4isup_event: > Received CIC=1 for unequipped circuit (typ=UBL), link 'l1'. > [2010-02-07 23:55:03.470] WARNING[5279]: l4isup.c:4690 l4isup_event: > Received CIC=2 for unequipped circuit (typ=UBL), link 'l1'. > [2010-02-07 23:55:03.472] WARNING[5279]: l4isup.c:2709 > process_circuit_message: Reset still in progress for CIC=5, typ=UBL, > state=0 message discarded. > [2010-02-07 23:55:03.474] WARNING[5279]: l4isup.c:2709 > process_circuit_message: Reset still in progress for CIC=4, typ=UBL, > state=0 message discarded. > > Any hint for where I can look ? > i'd recommend you do an 'ss7 dump start /tmp/ss7dump.pcap' and then wireshark that, and see if you're getting any responses on mtp3 from the telco -- wasim h. baig | principal consultant | convergence pk | +92 300 8508070 | peace be upon you ... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100208/d08c0489/attachment.htm
|