chan_ss7 - initial alignment failed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Subject: chan_ss7 - initial alignment failed
From: peterpet@xxxxxxx (Peter Petrov)
Date: Thu, 04 Feb 2010 23:13:41 +0200
In-reply-to: <ee714c4b1002041138j6e817cb5o10d6ce01b1396639@mail.gmail.com>
References: <ee714c4b1002041138j6e817cb5o10d6ce01b1396639@mail.gmail.com>

hi, check the physical transport layer. Check the cable, and if you have optical E1 modems check the right configuration of the jumpers! In the past i have the same message and i fix this with right configured jumpers on modems on my side and Telco side. and what kind of E1 card you are use for this SS7?

Follow-Ups:
- chan_ss7 - initial alignment failed
  - From: Goke M Aruna

References:
- chan_ss7 - initial alignment failed
  - From: equis software

Prev by Date: chan_ss7 - initial alignment failed
Next by Date: ss7 no audio after the call is answered
Previous by thread: chan_ss7 - initial alignment failed
Next by thread: chan_ss7 - initial alignment failed
Index(es):
- Date
- Thread

[Index of Archives] [Asterisk App Development] [PJ SIP] [Gnu Gatekeeper] [IETF Sipping] [Info Cyrus] [ALSA User] [Fedora Linux Users] [Linux SCTP] [DCCP] [Gimp] [Yosemite Backpacking] [Deep Creek Hot Springs] [Yosemite Campsites] [ISDN Cause Codes] [Asterisk Books]

Powered by Linux