Hi all,
Please find the working configuration files for your help. i am
using two E1 .
Detail of each file is as
*Chan_dahi.conf *
;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2010-03-17
;Dahdi Channels Configurations
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak
[trunkgroups]
[channels]
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
group=1
callgroup=1
pickupgroup=1
signalling = ss7
ss7type = itu
ss7_called_nai=dynamic
ss7_calling_nai=dynamic
networkindicator=national
; port 1
linkset = 1
group = 1
signalling=ss7
ss7type = itu
context = from-pstn
pointcode = XXX
adjpointcode = XXX
defaultdpc = XXX
networkindicator = national
cicbeginswith = 1
channel => 1-15
cicbeginswith = 17
channel => 17-31
sigchan = 16
; port 1
linkset = 1
group = 1
signalling=ss7
ss7type = itu
context = from-pstn
pointcode = XXX
adjpointcode = XXX
defaultdpc = XXX
networkindicator = national
cicbeginswith = 32
channel => 32-46
cicbeginswith = 48
channel => 48-62
;sigchan = 16
;Sangoma A104 port 1 [slot:3 bus:15 span:1] <wanpipe1>
;switchtype=national
;context=from-pstn
;group=0
;echocancel=yes
;signalling=pri_cpe
;channel =>1-15,17-31
;Sangoma A104 port 2 [slot:3 bus:15 span:2] <wanpipe2>
;switchtype=national
;context=from-pstn
;group=0
;echocancel=yes
;signalling=pri_cpe
;channel =>32-46,48-62
;
*system.conf*
#autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
#autogenrated on 2010-03-17
#Dahdi Channels Configurations
#For detailed Dahdi options, view /etc/dahdi/system.conf.bak
loadzone=us
defaultzone=us
#Sangoma A104 port 1 [slot:3 bus:15 span:1] <wanpipe1>
span=1,0,0,ccs,hdb3
bchan=1-15,17-31
echocanceller=mg2,1-15,17-31
hardhdlc=16
#Sangoma A104 port 2 [slot:3 bus:15 span:2] <wanpipe2>
span=2,0,0,ccs,hdb3
bchan=32-46,48-62
echocanceller=mg2,32-46,48-62
hardhdlc=47
*wanpipe1.conf
*
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 3
PCIBUS = 15
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
TDMV_HW_DTMF = NO
TDMV_HW_FAX_DETECT = NO
[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = YES
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 3
PCIBUS = 15
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
TDMV_HW_DTMF = NO
TDMV_HW_FAX_DETECT = NO
[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = YES
*wanpipe2.conf*
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe2 = WAN_AFT_TE1, Comment
[interfaces]
w2g1 = wanpipe2, , TDM_VOICE, Comment
[wanpipe2]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 3
PCIBUS = 15
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 2
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 2
TDMV_DCHAN = 16
TDMV_HW_DTMF = NO
TDMV_HW_FAX_DETECT = NO
[w2g1]
ACTIVE_CH = ALL
TDMV_HWEC = YES
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec 6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================
[devices]
wanpipe2 = WAN_AFT_TE1, Comment
[interfaces]
w2g1 = wanpipe2, , TDM_VOICE, Comment
[wanpipe2]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 3
PCIBUS = 15
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 2
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 2
TDMV_DCHAN = 16
TDMV_HW_DTMF = NO
TDMV_HW_FAX_DETECT = NO
[w2g1]
ACTIVE_CH = ALL
TDMV_HWEC = YES
On Thu, Aug 26, 2010 at 5:03 PM, bipin singh <bipinraghuvanshi at gmail.com>wrote:
> Yes it is work
> check your crc4 on or off .
>
> On Wed, Aug 25, 2010 at 3:23 AM, Mohammad Tareq Kibria <
> tareq at onecallbd.com> wrote:
>
>> *I am planning to make Workable SS7 link with the following details.
>>
>> 1. Sangoma A101D E1 card.
>> 2. Chan_ss7
>> 3. Dahdi driver
>> 4. Asterisk 1.6.2.X
>>
>> Will it work??? Any suggestion from from you?
>> *
>>
>> *Best regards,*
>>
>> * *
>>
>> *Mohammad Tareq Kibria
>> *
>>
>> *Sr. System Engineer
>> *
>>
>> * *
>>
>> *OnecallTM*
>>
>> *House No. 90, Road 5, Block F, Banani, Dhaka ? 1213, Bangladesh*
>>
>> *PSTN: +88 02 9893773, 9892949, FAX: +88 02 9891253, GSM: +88 01922796939
>> *
>> *Email: tareq at onecallbd.com, Web: http://www.onecallbd.com*
>>
>> --
>>
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
>
>
> --
> BIPIN RAGHUVANSHI
> OPERATION HEAD
> ASTERISK (DEVELOPMENT AND RESEARCH)
> WWW.EHORIZONS.IN
> 011-32323262
> 011-46334633
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100826/f2c7e6b4/attachment-0001.htm
|