Ok so, for the ones who've been following up on my posts:
by issuing noa => 1 (which I've come to know means subscriber) to the
linkset part, got the 90 away, now I can do local and mobile calls,
next, I will apply the patch for overlapping CIC codes when 2 signalling
channels thingy and let you know.
and another fact, by setting up more than 16 links on ss7.conf broke
chan_ss7, so there is a patch to be applied for sure, not that It
shouldn't work fine with up to 16, which somehow leads me to believe
that in fact the operator has the problem on the non-working E1s.
What should ssn => be set to? should it be set to anything in
particular?
Any light?
Regards,
Jorge.
> Hi,
>
> I've come to know that a patch is required to use 16 or more E1s with
> chan_ss7 on a cluster.
> Any light you can shed about this patch?
>
> regards,
>
> Jorge.
>
> 2010-04-19 at 09:50 -0600, Jorge Antillon wrote:
>
> > Hi, is there any chance, whatsoever, that I may be wrong in my
> > setup, that somehow chan_ss7 does not support 16 or 20 E1s or that
> > this is a misconfiguration?
> > Ahmad points that the E1s are blocked on the remote end, is there
> > any possibility that it may be my setup or chan_ss7?
> >
> > Please comment.
> >
> > jorge.
> >
> >
> >
> >
> >
> > On Sat, 2010-04-17 at 12:14 +0500, linuxgurus at gmail.com wrote:
> >
> > > ?Idle Reset pending? means E1 blocked by your provider.
> > >
> > >
> > >
> > > Regards,
> > >
> > > Ahmad
> > >
> > >
> > >
> > > From:asterisk-ss7-bounces at lists.digium.com
> > > [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Jorge
> > > Antillon
> > > Sent: Saturday, April 17, 2010 1:14 AM
> > > To: asterisk-ss7 at lists.digium.com
> > > Subject: Re: [asterisk-ss7] SS7 Costa Rica
> > >
> > >
> > >
> > >
> > > Ok, so, although things kind of work with the E1s, I mean can do
> > > calls on all first 8 E1s, the 9th E1 has the following condition:
> > >
> > > CIC 249 Idle Reset pending
> > >
> > > and it goes on up until CIC 280 then from 281 to 372 is Idle and I
> > > can place calls.
> > > Same happens with 373 all the way up to 404.
> > >
> > > CIC 373 Idle Reset pending
> > >
> > > Then channels up to CIC 496 behave fine, below is a copy of my
> > > ss7.conf
> > >
> > > Please bear in mind that I use chan_ss7 and system.conf files are
> > > identical on machine 1, 3 and 4, machine 2 has a sangoma card, but
> > > that one works fine.
> > > So I can say that suspicious E1s are 9 and 13 and I can assure
> > > that I've checked CIC consistency.
> > >
> > > [linkset-ls1]
> > > enabled => yes
> > > enable_st => no
> > > use_connect => no
> > > hunting_policy => seq_lth
> > > context => congestion
> > > language => en
> > > t35 => 15000,timeout
> > > subservice => auto
> > > variant => ITU
> > >
> > > [link-l1]
> > > linkset => ls1
> > > channels => 1-30
> > > schannel => 31 at SJO_P0BX_01:12000
> > > firstcic => 1
> > > enabled => yes
> > > echocancel => 31speech
> > > echocan_train => 350
> > > echocan_taps => 128
> > >
> > > [link-l2]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 32
> > > enabled => yes
> > >
> > > [link-l3]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 63
> > > enabled => yes
> > >
> > > [link-l4]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 94
> > > enabled => yes
> > >
> > > [link-l5]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 125
> > > enabled => yes
> > >
> > > [link-l6]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 156
> > > enabled => yes
> > >
> > > [link-l7]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 187
> > > enabled => yes
> > >
> > > [link-l8]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 218
> > > enabled => yes
> > >
> > > [link-l9]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 249
> > > enabled => yes
> > >
> > > [link-l10]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 280
> > > enabled => yes
> > >
> > > [link-l11]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 311
> > > enabled => yes
> > >
> > > [link-l12]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 342
> > > enabled => yes
> > >
> > > [link-l13]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 373
> > > enabled => yes
> > >
> > > [link-l14]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 404
> > > enabled => yes
> > >
> > > [link-l15]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 435
> > > enabled => yes
> > >
> > > [link-l16]
> > > linkset => ls1
> > > channels => 1-31
> > > schannel =>
> > > firstcic => 466
> > > enabled => yes
> > >
> > >
> > >
> > > [host-SJO_P0BX_01]
> > > enabled => yes
> > > opc => 0x601
> > > dpc => ls1:0x103
> > > default_linkset => ls1
> > > links => l1:1,l2:2,l3:3,l4:4
> > > ;globaltitle => 0x00, 0x04, 0x01, 4702636074
> > > ssn => 7
> > > if-1 => 192.168.10.24
> > >
> > > [host-SJO_P0BX_02]
> > > enabled => yes
> > > opc => 0x601
> > > dpc => ls1:0x103
> > > default_linkset => ls1
> > > links => l5:1,l6:2,l7:3,l8:4
> > > ;globaltitle => 0x00, 0x04, 0x01, 4702636074
> > > ssn => 7
> > > if-1 => 192.168.10.25
> > >
> > > [host-SJO_P0BX_03]
> > > enabled => yes
> > > opc => 0x601
> > > dpc => ls1:0x103
> > > default_linkset => ls1
> > > links => l9:1,l10:2,l11:3,l12:4
> > > ;globaltitle => 0x00, 0x04, 0x01, 4702636074
> > > ssn => 7
> > > if-1 => 192.168.10.26
> > >
> > > [host-SJO_P0BX_04]
> > > enabled => yes
> > > opc => 0x601
> > > dpc => ls1:0x103
> > > default_linkset => ls1
> > > links => l13:1,l14:2,l15:3,l16:4
> > > ;globaltitle => 0x00, 0x04, 0x01, 4702636074
> > > ssn => 7
> > > if-1 => 192.168.10.27
> > >
> > > Pleeeeeeeeeeeeeeeeease help.
> > >
> > > thanks all.
> > >
> > >
> > >
> > >
> > >
> > > On Fri, 2010-03-26 at 16:29 -0600, Jorge Antillon wrote:
> > >
> > >
> > >
> > > So I made it right and got all channels on the card Up, now I need
> > > to grow it.
> > >
> > > I need to know where is some documentation for the following:
> > >
> > > loadshare
> > > combined
> > >
> > > globaltitle
> > > ssn
> > >
> > > I know if I don't get those right, they will come and bite me in
> > > the a**.
> > >
> > > Please please, pretty please.
> > >
> > > regards and thanks to all for all of your help.
> > >
> > > Jorge.
> > > Note: I would post my config file, but it seems long threads kind
> > > of trigger the sysop in panic, so refraining.
> > >
> > >
> > >
> > > --
> > > _____________________________________________________________________
> > > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > > --
> > > _____________________________________________________________________
> > > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> > --
> > _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100429/06613543/attachment.htm
|