Dear Goke, Where in the trace do the links fail? I see that at packet 954 and and 956 you receive a TFP, for point code 1538. A. On 04/18/2010 10:01 PM, Goke M Aruna wrote: > Dear Amish, > > my ss7.conf > > [linkset-ewsd] > enabled => yes > enable_st => no > use_connect => no > hunting_policy => seq_lth > subservice => auto > language => en > variant => ITU > context => outbound > ;sltm => no > > [link-l1] > linkset => ewsd > channels => 1-15,17-31 > schannel => 16 > firstcic => 1 > enabled => yes > > [link-l2] > linkset => ewsd > channels => 1-15,17-31 > schannel => > firstcic => 33 > enabled => yes > > [link-l3] > linkset => ewsd > channels => 1-15,17-31 > schannel => > firstcic => 65 > enabled => yes > > [link-l4] > linkset => ewsd > channels => 1-15,17-31 > schannel => > firstcic => 97 > enabled => yes > > > [host-brooks1] > enabled => yes > opc => 1366 > dpc => ewsd:1304 > links => l1:1,l2:2,l3:3,l4:4 > > the setup is as below. > > [ IP SIP calls] <== (ethernet / internet) ==> [asterisk / chan_ss7 box > PC=1366] <==(ss7 link (1 signalling 4 E1s)) ==> [EWSD PC=1304 ] <== > (ss7 links) ==> [GSM / CDMA operators] > > Thanks > > On Sun, Apr 18, 2010 at 1:39 PM, Amish Chana <amish at 3g.co.za > <mailto:amish at 3g.co.za>> wrote: > > Dear Goke, > > Can you post the ss7.conf file. > Can you provide a diagram of the flow of voice calls and signalling? > How are you generating the call traffic? > >From the trace it looks like all the traffic is generated by > point code 1366 and sent to 1304. How many signalling links do you > have? > I assume you have chan_ss7 at 1366? What protocol stack do you > have at 1304? > Where in the trace do the links fail? > I see that at packet 954 and and 956 you receive a TFP, for point > code 1538. > > Best Regards, > Amish > > > > On 04/16/2010 07:28 PM, Goke M Aruna wrote: >> Amish, >> >> Thanks everybody for your response so far. >> >> however, after loading the call to certain 78 simultaneous calls >> and the signalling just failed and the dump is as attached. >> I tried disabling the sltm, asterisk refuse to start giving me >> the error "unknown options". >> >> kindly help. >> >> >> >> On Wed, Apr 14, 2010 at 8:44 PM, Goke M Aruna <goksie at gmail.com >> <mailto:goksie at gmail.com>> wrote: >> >> Log messages. >> >> On 4/14/10, Amish <amish at 3g.co.za <mailto:amish at 3g.co.za>> wrote: >> > On 04/14/2010 02:32 AM, Goke M Aruna wrote: >> >> Thanks Amish, >> >> >> >> the links have been up for the last 4 hours with minor >> error util.c : >> >> failed to delete timer. >> >> >> > Hi, >> > >> > Where this this error appear? The asterisk messages file or >> the console? >> > I don't see this error in my /var/log/asterisk/messages file. >> > >> > Cheers, >> > A. >> > >> > >> >> -- >> Sent from my mobile device >> >> > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100418/abdebdfc/attachment.htm
|