Hi Guys... I allready made a trial of the leibct/sangoma solution tcap/map for ati purpose, no problem at all. quick installation, easy to use, very cheap. This solution can be found on sigtran too. You can find them at www.leibct.com or aleib at internet.com.uy I hope this info will helpe someone rv 2009/10/28, Paul Bagyenda <bagyenda at dsmagic.com>: > Essentially what you need is the ability to send the signalling > traffic over IP, right? > > A while back I posted our initial attempts at getting this in place: > http://www.mail-archive.com/asterisk-ss7 at lists.digium.com/msg02760.html > > Essentially the first thing that's needed is M3UA. Attached is a diff > and two files to get this to work with libss7. Beyond that you need > SCCP (for most MAP that's class 0 and 1, which is easy to add). Not > done work on that (yet). Then MAP, decoding/encoding of which is not > difficult with the write asn.1 lib/tools. > > All the same, here is the m3ua code, perhaps it can serve as a start. > > > > On Oct 27, 2009, at 14:47, Marco Cordeiro wrote: > >> Hello All, >> >> I know that this subject has been discussed many times here, but >> since I haven't been following the list lately, I'll bring it up >> again. >> >> Do you have any updates on MAP support for libss7 ? >> >> I'll explain my problem, any maybe you could give me suggestions. >> >> I'm trying to integrate two MSCs (Mobile Switch) that currently are >> connected thru a dedicated link (Voice + Signalling) that costs a >> lot per month, once the two locations are very far from each other >> (about 3000 Km). The idea is to integrate them thru the internet. >> >> The voice channels must be ISUP, and related to that the current >> version of libss7 is perfect, some tests have being made and it >> works perfectly, running an Asterisk in each location, locally >> connected to the MSC with and ISUP link, and the traffic being >> exchanged thru and IAX trunk between the 2 servers. >> >> Now the idea is to also migrate SS7 MAP signalling between this two >> locations. Currently location "A" holds the HLR for the whole >> signalling network, and location "B" has to check HLR's database for >> mobile's profile. I was thinking about doing the same setup used for >> voice channels, but now used for SS7 MAP signalling. >> >> I now that there are many solutions in the market for that, such as >> CISCO ITP Routers (SS7 over IP), SS7 tunneling devices, but I would >> like to try a cost effective solution using asterisk if possible. >> >> Rgs, >> >> Marco Cordeiro >> mhcordeiro at gmail.com >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > >
|