Hi all:
When i load chan_ss7.so,i get a error message like that,what is the problem!?
STAMP-ASTFIN*CLI> module load chan_ss7.so
STAMP-ASTFIN*CLI> [Oct 17 02:43:38] NOTICE[246]: config.c:625 load_config_link: Configured link 'l1' on linkset 'ls1', firstcic=1
[Oct 17 02:43:38] WARNING[246]: config.c:877 load_config_host: Missing interface entries for host 'STAMP-ASTFIN'.
[Oct 17 02:43:38] NOTICE[246]: config.c:1045 load_config: Configuring DPC 2722082 for linkset 'ls1'.
[Oct 17 02:43:38] WARNING[246]: transport.c:185 openchannel: Failure in DAHDI_SPECIFY for circuit 1: Device or resource busy.
[Oct 17 02:43:38] ERROR[246]: chan_ss7.c:842 ss7_load_module: Unable to initialize ISUP.
[Oct 17 02:43:38] NOTICE[246]: config.c:625 load_config_link: Configured link 'l1' on linkset 'ls1', firstcic=1
[Oct 17 02:43:38] WARNING[246]: config.c:877 load_config_host: Missing interface entries for host 'STAMP-ASTFIN'.
[Oct 17 02:43:38] NOTICE[246]: config.c:1045 load_config: Configuring DPC 2722082 for linkset 'ls1'.
[Oct 17 02:43:38] WARNING[246]: transport.c:185 openchannel: Failure in DAHDI_SPECIFY for circuit 1: Device or resource busy.
[Oct 17 02:43:38] ERROR[246]: chan_ss7.c:842 ss7_load_module: Unable to initialize ISUP.
here is my config
ss7.conf:
[linkset-ls1]
enabled => yes
enable_st => yes
use_connect => no
hunting_policy => even_mru
context => ss7_call
language => en
subservice => auto
variant => CHINA ; ????ss7 ???
[link-l1]
linkset => ls1
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes
echocancel => no
echocan_train => 350
echocan_taps => 128
[host-STAMP-ASTFIN]
enabled => yes
opc => 0x222222 ; ??
dpc => ls1:0x298922 ? ??
links => l1:1
zaptel.conf:
loadzone = cn
defaultzone=cn
span=1,1,0,ccs,hdb3
bchan=1-15,17-31 # set this to 1-15,17-31 for E1
dchan=16 # set this to 16 for E
Thanks!!!
zhubinyu
2009-10-17
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091017/22a83ab5/attachment.htm
|